1001 Enter a new Project name. (Click the Browse button to find a specific folder.) \n\nTo capture new video scenes, switch to "Get Video". For existing ones, switch to "Arrange". \n\nIf you don't see any preview, click the Info button for help.
1002 If you don't see any video, it maybe because you have yet to configure your video capture device. To check, click the Video Source button. Here, select the type of video input device you have, as well as, the television standard used in your country. \n\nIf you want to change the frame size of your video, click the Video Format button Generally, choose half size if you want to save disk space and full size for better \n\nIf you still do not see any video after you have checked all the necessary connections or are unsure about the available options, consult the documentation that came with your video capture device.
1003 Click the Begin button to start the capturing process. This button toggles between Begin and Stop. To end the capture process, click the button again. Repeat this step until you have captured all the scenes you want. \n\nFor more tips on capturing video, click the Info button.
1004 Capturing video can place a heavy demand on your computer. Depending on the type of computer you have, you may find the results vary from excellent to poor. If your video does not look as expected or jitters during playback, you may try capturing half size video or adjusting the compression quality ratio. This can be done in the Start step of the main program, Ulead VideoStudio.
1005 Select a clip and drag it to the position where you want it to play in the final movie. To trim a video clip, select it first and then click the Trim button. \n\nTo learn more about trimming, click the Info button.
1006 Trimming is the process of editing unwanted frames out of a captured clip. From the Trim Video dialog box, use the play controls below the Preview window to move to the frame where you want your video clip to begin and then click the Start Frame button. Next, move to the frame you want the clip to end on and click the End Frame button. \n\nWhen done making your selection, click the Return button to go back to Video Wizard.
1007 Select how a clip ends and starts another from the Transtion effect drop down list. Add music by selecting an audio file (*.WAV). To finish, type in your title in the entry box. (Press Ctrl+M to start a new line.) \n\nFor more tips, click the Info button.
1008 When you select a transition, the same one is applied to all clips. If you want variations, choose the Select Random option. You can always change this later. \n\n Add music by selecting an audio file (*.WAV file extension). You can also record your own voice over using a microphone or copying music from a CD using a Sound Recorder utility that comes with Windows 95. \n\nRemember, when adding a title, make sure you add enough line breaks (Ctrl + M) so that your text does not run off the screen.
1009 Click the Create Video File button to start processing your final movie. If you would like to work with more advanced features, click the Open In VideoStudio button.\n\nFor more tips on creating a video, click the Info button.
1010 Sometimes, creating a video takes a long time especially if you included a lot of effects in it. If it is taking too long, press the Esc key and switch to "Add Effect". Remove either the transition effect or the title. You can also shorten the total length of the video by removing some clips or trimming individual clips.
1011 Congratulations! You have successfully created a video file. To play this file, use the controls at the bottom of the window.\n\nFor more information on playing a video file, click the Info button.
1012 After previewing your video, you will notice that a few seconds of blank frames appear at the end of the sequence. These blank frames are there to help you identify when the video ends. If you want to edit these frames or remove them, switch to Create and then click the Open In VideoStudio button. This will open your project in Ulead VideoStudio where you can easily trim your clips individually.
1101 Arial
1102 Arial
1103 *.vsp
1104 *.wav
1200 %d file(s) captured
1201 Begin
1202 Stop
1203 The file [%s] already exists. Do you want to overwrite this file?
1204 Do you really want to quit the Video Wizard?
1205 Do you want to delete all captured files? If yes, they will be permanently removed from your computer.
1206 %d/%d
1207 Mark in: %d
1208 Mark out: %d
1209 %dx%d
1210 Free space: %s Bytes
1211 Free space: %s KB
1212 Free space: %s MB
1213 Unable to access the captured file. Your disk maybe full or write-protected.
1214 Free space: network drive
1301 Unable to continue capturing. Please check your settings and try again.
1302 Please give your project a name before continuing.
1303 All projects must have the file extension, '*.VSP'.
1304 Unable to create the file. Disk may be full, write protected, or invalid file name.
1305 Insufficient memory. Please close other programs to free system resources.
1306 Invalid audio file format. You can only use files with a '*.WAV' extension.
1307 Insufficient disk space. Please free up some disk space or use another drive.
1308 Unable to run [%s].
1309 Unable to open the file. Either the file does not exist or is invalid.
1310 Unable to open the file [%s]. Either the file does not exist or is invalid
1311 Your title currently exceeds the frame boundary. Please use less text or choose a smaller font size.
1312 There is no video file because a project file was not created.
1313 Dropped %ld of %ld frames (%d.%02d%%) during capture.
1314 Trim Video
1401 None
1402 Select Randomly
1403 Barn Door
1404 Blinds
1405 Box
1406 Cross
1407 Crossfade
1408 Dissolve
1409 Slide
1410 Spiral
1411 Sweep
1431 RANDOM
1432 BARNDOOR
1433 BLIND
1434 BOX
1435 CROSS
1436 FADE
1437 DISSOLVE
1438 WIPE
1439 SPIRAL
1440 CLOCK7
1500 Return to Video Wizard
1501 Stop playing video
1502 Play video
1503 Play selection
1504 Go to the preceding marked frame
1505 Rewind
1506 Previous frame
1507 Next frame
1508 Forward
1509 Go to the next marked frame
1510 Pause
1511 Mark as the Start frame
1512 Mark as the End frame
1550 3
1551 5
1552 0
1553 0
1554 Ulead Systems,Inc. (c)1993 - 1998
1555 Ulead Video Wizard
1556 VStudio.exe
1557 VStudiod.exe
1600 vidwiz.ini
1601 Wizard Capture
1602 VideoFrameRate
1603 PreviewFrameRate
1604 CaptureAudio
1605 SampleRate
1606 Channels
1607 BitCount
1612 Project file settings
1613 ProjectWidth
1614 ProjectHeight
1615 PreviewWidth
1616 PreviewHeight
1617 ProjectPath
1618 DisableDiskCheck
1619 AudioPath
1620 VideoPath
1630 DisableDriverBeforePlayback
1631 DisplayOverlayIfSupport
1632 AudioBuffers
1633 Unable to run the program at the current screen size. Please go to the Settings tab in the Windows Display Properties dialog box and change the display area to at least 800x600.
1634 Unable to create the project file. You need to capture at least one file before continuing.
1635 The project is currently being created. Please wait until it is finished or cancel this operation.
1636 Unable to play the specified video file. Either the file does not exist or is invalid.
1637 Video Wizard is capturing video. Please stop the capture operation (press the Esc key) before continuing.
1638 Please close Ulead Video Wizard before ending your current session.
1639 The clip duration must be greater than zero.
1640 Ready to create the video.
1641 Preparing to create the video file. . .
1642 Creating video. . .
1650 Frames: %d/%d
1651 Select a video.
1660 File [%s] is already in use.
1661 vwii.ini
1662 Capture %d Frames(%d Drop) %d.%02d Sec.
1663 Error: Connection to capture driver failed. It maybe in use or has been moved.\n
