104 We will now perform a series of tests that will determine the DMA settings of your Windows audio hardware.\n\n
105 Would you like to continue?
106 Detected: %s\n\nWould you like to use the standard settings for this device?\n\nChoose YES to use the standard settings (recommended).\nChoose NO to override the standard settings.
107 Audio hardware has been successfully profiled.
108 We will now perform a series of tests that will determine the optimal data transfer rate for your hard disk.\n\n
109 Microsoft Audio Compression Manager (MSACM) is missing or invalid. It may be installed from your setup disks by clicking on the 'Drivers' icon in the Control Panel.
110 Disk Profiler
111 An error occurred while profiling audio hardware.\n\n
112 If you experience synchronization problems between digital audio and MIDI, please contact Cakewalk technical support.
113 Auto-detect has been aborted.\nCurrent settings have been restored.
114 --- None ---
115 We must now perform a series of tests to determine the timing characteristics of your Windows audio hardware.\n\n
116 To ensure the best possible synchronization between MIDI and digital audio, we recommend that you allow us to perform
117 these tests now. However, you may also perform them at a later time by choosing Options | Audio Options...\n\n
118 Would you like your hardware to be tested now?
119 Take%ld/%u
120 %ld Hz
121 %d: %s
122 %d: %s
123 However, some sample rates are not supported by your hardware.
124 Mixing down audio
125 &Queue Time (ms):
126 &Queue Buffers:
127 DirectShow Configuration
128 &Playback Wave Device:
129 &Record Wave Device:
130 Percent (%)
131 Track%d.Vol
132 Track%d.Pan
133 Aux%dRet.Vol
134 Aux%dRet.Balance
135 Aux%dSend%d.Vol
136 Aux%dSend%d.Pan
137 Aux%dMaster.Vol
138 Aux%dMaster.Balance
139 Main%dVol.L
140 Main%dVol.R
141 Track Volume
142 Track Pan
143 Send Volume
144 Send Pan
145 Return Volume
146 Return Balance
147 Send Volume
148 Send Balance
149 Aux %d
150 Changes will not take effect until the next time you start the program. To make them take effect now, please choose Exit from the File menu, then start the program again.
151 DirectShow Audio
152 Main Volume
153 Data Directory
154 Take Vault
155 |16|18|20|22|24
156 The default sample rate and bit depth is not supported by one or more sound cards. The default has been reset to 44.1kHz and 16 bits per sample.
157 The default sample rate and bit depth is not supported by one or more sound cards. All audio ports have been disabled.
158 |16|24
159 One or more sound cards do not support stereo. The default audio format has been set to mono.
160 Waveform Pictures
161 Incorrect version of VcakeD driver. Please reinstall Cakewalk from its original media.
162 Audio initialization error
163 Drive %c: at %d KB/block
164 Unable to create temporary file. 128MB of free disk space is required to perform this analysis.
165 Unable to repopen temporary file..
166 File seek error.
167 File read error.
168 An error occurred.
169 %s does not exist.\nWould you like to create it?
