home *** CD-ROM | disk | FTP | other *** search
- 3D/Graphics Blaster RIVA Series Drivers for NT 4 (Service Pack 3 and above)
- --------------------------------------------------------------------------
- Version 1.01
-
- This file contains additional information to supplement the manual.
- Please read through all the sections before you proceed with the
- installation.
-
- This file contains the following sections:
-
- 1. Driver notes
- 2. BlasterControl Limitations
- 3. Known Problems
- 4. Switching Drivers
-
-
- 1. Driver notes
-
- a) Driver supports Monitor controls, Color adjustments, Virtual Desktop,
- Hardware and OpenGL Tweaks.
-
- b) Driver can be removed using "Add/Remove programs" in Control Panel.
-
-
- 2. BLASTERCONTROL LIMITATIONS
-
- BlasterControl only works in 256 colors and above.
-
-
- 3. KNOWN PROBLEMS
-
- a) Driver will work only on systems with service pack 3 and above.
-
- b) If your system keeps booting only in 16 color mode, try the
- following
-
- i) Ensure that you have the following settings in your "SYSTEM
- BIOS" setup:
-
- Enable "Assign IRQ to VGA"
-
-
- 4. SWITCHING DRIVERS
-
- If you intend to switch from Creative Technology's drivers to
- Nvidia's drivers, you will be unable to use the BlasterControl
- software and Creative SoftMPEG.
-
- Regardless of which drivers you choose to install, you must install
- all files from the installation. Failing to do so may result in the
- Windows not being able to detect your 3D/Graphics Blaster card. If
- this occurs, reboot your system to Windows Safe Mode and reinstall
- the drivers.
-
-
-
-