131 Range string is invalid. \n\nAn example of a valid string is:\n\nTOC:1-3, Body:4,12, Index:13-29
132 Please select a section or a range of pages to print.
133 The specified sections or range of pages do not contain any even-numbered pages.\nDeselect 'Even Pages Only' or specify even-numbered pages for printing.
134 The specified sections or range of pages do not contain any odd-numbered pages.\nDeselect 'Odd Pages Only' or specify odd-numbered pages for printing.
135 Range string is invalid. No matching section name found. \n\nAn example of a valid string is:\n\nTOC:1-3, Body:4,12, Index:13-29
136 Range string is missing valid numeric entries. \n\nAn example of a valid string is:\n\nTOC:1-3, Body:4,12, Index:13-29
137 Invalid characters found in range string. \n\nAn example of a valid string is:\n\nTOC:1-3, Body:4,12, Index:13-29
138 Reader spread information has not been specified. This option is not valid.
170 Both Pages
171 Even Pages Only
172 Odd Pages Only
230 Graphics
283 All
284 Optimized Subsampling
285 Low Resolution (72 dpi)
330 Page Marks
331 Bleed value is out of range (%s - %s) or is invalid.
332 Warning: Scale to Fit calculation failed. Scale value will be set to 100%.
430 Scale and Fit
431 Width is out of range (%s - %s) or is invalid.
432 Height is out of range (%s - %s) or is invalid.
433 Tiling overlap is out of range (%s - %s) or is invalid.
434 Warning: Tiling overlap was invalid due to a change in the printer paper size.\nOverlap value has been modified.
435 Warning: Scale to Fit calculation failed. Scale value will be set to 100%.
470 None
471 Auto
472 Manual
480 Off
481 Application Built-in
482 Adobe in-RIP
530 Color
531 Frequency is out of range (%s - %s) or is invalid.
532 Angle is out of range (%s -%s) or is invalid.
533 Threshold is out of range (%s-%s) or is invalid.
535 Separations cannot be performed - job has no inks.
536 Target printer does not support internal separations.
537 Cannot turn on separations and request no inks
630 Trapping
632 New Trapping Page Ranges
633 Edit Trapping Page Ranges
634 New Trapping Style
635 Edit Trapping Style
639 Warning: Invalid argument passed to trapping panel.
640 The specified printer does not support trapping.\nPlease choose a printer that supports PostScript 3 trapping.
641 Normal
642 Transparent
643 Opaque
644 Opaque Ignore
645 Center
646 Choke
647 Neutral Density
648 Spread
649 Please enter a name or value for the style.
650 The style name already exists. Please enter another.
651 Please enter a value between %s and %s.
652 Please enter a valid percentage value (between 0 and 100).
653 Please enter a value between %s and %s.
654 Please enter a value greater than or equal to 0.0.
655 This is the default style for the document. It cannot be removed.
656 The trap zone name is blank or already exists. Please enter a new trap zone name.
657 You cannot remove the default trapping zone.
658 This is the default trap zone for the document. You can only modify the enabled state. Any other changes will not saved.
659 There is no style selected. Please select the style you wish to edit.
660 This is the default trap style. Any modifications will not be saved.
661 There is no style selected. Cannot remove a style.
662 There are no inks registered for this printer.
663 Neutral density must be between 0 and 10.
664 Trapping order must be between 1 and %s.
665 Galley
2000 AGM Print
2001 Insufficient memory. Please save your work and restart this application.
2002 Warning: Could not process the printer change.
2003 Error: incompatible version of AGM.rsl resource file.
2004 Double check the settings in this dialog box. One or more settings might have been misread.
2006 To use these options, you must select a PostScript printer.
2007 To cancel printing, press Cancel.
2008 Warning: Error occurred during host application processing.
2009 Install and use AdobePS 4.3 or later PostScript driver for best results.
2010 Install and use AdobePS 5.1 or later PostScript driver for best results.
2011 Install and use Windows 2000 or later PostScript driver for best results.
2012 Cannot uncheck Print to File. The current printer's port setting is FILE:.\nUse Start > Settings > Printers to specify a different printer, or a different port for the current printer.
2100 .ps
2101 Default
2102 Custom
2103 All to Pr&ocess
2104 Revert to Sp&ot
2105 1
2106 14
2107 Offset using paper size:
2108 Offset using printable area:
2109 L:
2110 R:
2111 T:
2112 B:
2113 Using manual tiling to print.
2114 tiles per publication page.
2116 Assembled tiles represent the
2117 entire publication page.
2118 W
2119 H
2120 Paper size
2121 Page size
2122 (
2123 )
2124 :
2125 ps
2126 prn
2127 PostScript
2128 *.ps
2129 Printer Files
2130 *.prn
2131 All Files
2132 *.*
2200 pt
2201 in
2202 cm
2203 mm
2204 p
2205 c
2206 ha
2300 points
2301 inches
2302 cm
2303 mm
2304 picas
2305 ciceros
2306 ha
2307 -
2308 .
2400 Printing
2401 Use the Windows Start>Settings>Printers command to specify a default printer.
2402 Driver name error.
2403 Printer driver not found.
2404 Cannot find the PPD for the current printer.
2405 Unable to open the PPD file specified by the driver.\nDefault printing options will be used.\nTo ensure best quality and performance, please re-install your PPD.
2406 Environment not satisfactory for this job, which requests at least\nPostScript Level ^ and at least PostScript version ^. Ensure that the PPD is correct or that\nthe PostScript level requested is supported by this printer.
2407 This job contains colors that will not separate\nwith on-host methods.
2408 This job contains an invalid color space.
2500 Process Cyan
2501 Process Magenta
2502 Process Yellow
2503 Process Black
2504 .61
2505 .76
2506 .16
2507 1.7
3000 Please use the "Scale and Fit" panel of the Print dialog box to specify scaling. The scale setting under "Properties" is supplied by the printer driver, and will be ignored. The driver's scaling value will be reset to 100%.
3001 Please use the "Scale and Fit" panel of the Print dialog box to specify scaling. The scale setting under Layout panel is supplied by the printer driver, and will be ignored. The driver's scaling value will be reset to 100%.
3002 The printer driver's "N-up" option is incompatible with the "Tiling" option in theScale and Fit panel. The printer driver's "N-up" option will be ignored.
3003 The printer driver's "N-up" option is incompatible with the "Reader's Spreads" option in the Advanced Page Control panel. The printer driver's "N-up" option will be ignored.
3004 The printer driver's "Print on Both Sides" option is incompatible with the "Tiling" option in the Scale and Fit panel. The printer driver's "Print on Both Sides" option will be ignored.
3005 The "Tiling" option in the Scale and Fit panel is not supported when "Separations" in the Color panel is selected. The "Tiling" option will be ignored.
3007 On-Host Trapping requires font downloading; Please enable font downloading in the graphics panel.
3008 You cannot print composites with Application Built-in trapping enabled.\nPlease turn off Application Built-in trapping, or print separations instead.
3009 You are about to delete a style that is in use, continue?
3010 Warning
3011 The publication size is larger than the size of the paper chosen for this printer. If you wish to continue printing this pubication, some clipping will occur.
