Using Notes Server Statistics and Event Configuration
This database is used to configure Notes server event handling, statistic monitoring, ACL monitoring, and replication monitoring. It replaces the database EVTTYPES.NMF, ALARMS.NSF and some sections of NAMES.NSF from Release 3 of Notes.
This database contains the names of all statistics monitored by the Notes server program.
In addition, it contains error and status messages reported by the Notes server. Server administrators can use this database to change severities to possible errors, and to add customized text to the standard message text.
For recommendations on using this database with the server's Statistics Reporting, and Event Monitoring programs, see the Lotus Notes
Administrator's Guide.
Types of Documents
This database is primarily used as a reference for administrators, but can be customized and edited to be specific to each site.
Message
Notes uses this form to display information about error messages. You can edit existing messages to add more information in the
User addendum
field or to change the severity of a message.
Notification Method
an add-on product may use this form to create additional notification methods for the Event Dispatcher.
Statistic
Notes uses this form to display information about server statistics. You could use this form if you needed to create a new statistic (for instance, Disk.F.Free). You can also edit existing statistic documents to change the default threshold information.
Statistic Monitors
. Notes uses this form for entering which statistics you want to monitor. You can select the statistic you want to monitor, its threshold, operator and event severity.
Event Monitors
This form is used to configure the event monitors. You can set the notification method, the notification destination, the event severity, and the event description.
ACL Monitors
This form is used for setting ACL monitor configuration.
Replication Monitors
This form is used to configure the replication monitors..
Server
This form is used to configure the server which will be running the Reporter and Event tasks. The Mail-in database cane be entered her. The Collection and An
alysis intervals cane also be set here.
Views and Folders
Database Monitors
Displays all ACL Monitors and Replication Monitors that have been configured.
Event Monitors
Displays all Event Monitors that have been configured.
Statistic Monitors
Displays all Statistic Monitors that have been configured.
Servers to Monitor
Displays all servers that have been configured for monitoring.
Messages
Displays all message documents, categorized by type and severity.
The types of error messages are:
Communications
. Relates to remote and LAN communications and modems
. Relates to mail routing
Miscellaneous
. Relates to events not classified in the other categories
Replica
. Relates to replication
Resource
. Relates to system resources, such as insufficient memory or disk space
Security
. Relates to access and IDs
Server
. Relates to conditions tied to a particular server, such as server tasks not executed or problems with the server entry in the Name & Address Book
Statistics
. Relates to Statistics Reporting
The severity levels are:
Fatal
. Imminent system crash
Failure
. Severe failure that does not result in system crash
Warning (high)
. Loss of function requiring intervention
Warning (low)
. Performance degradation
Normal
. Status messages
Notification Methods
Displays the notification methods available to the Notes Event Dispatcher. The three ways to send event notices are through Notes mail, logging them to a database, and relaying them to another server. (If you purchased an add-on product designed to work with the Notes server management tools, you may see additional notification methods.)
Statistic Names
Displays the statistics tracked by Notes when the Statistics Reporting task runs on the server, sorted in alphabetical order.
Thresholds
Displays those statistics that are critical enough to warrant Statistic Monitor documents in the Name & Address Book (so that an alarm is generated when the server exceeds a threshold).
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Fde!f^^
RQ-Kz
V@[}M
$Info
$Body
Times New Roman
Task List
&Switch To
About Notes Server Statistics and Event Configurationh
Notes Server Statistics and Event Configuration Database
This database is used to configure Notes server event handling, statistic monitoring, ACL monitoring, and replication monitoring. It replaces the database EVTTYPES.NMF from Release 3 of Notes.
This database contains the names of all statistics monitored by the Notes server program. Each statistic record contains default thresholds. An administrator may wish to modify these defaults to reflect individual installation requirements.
In addition, it contains error and status messages reported by the Notes server. Server administrators can use this database to assign severities to possible errors, and to add customized text to the standard message text.i
This database can be used in four ways:e
- to configure Notes server event handling;
- as a reference, to look up information about a specific statistic or event message;s
- to set default behavior for new statistic thresholds;
- to assign types and severities to server events, and to add user specific documentation.
51MessageERR_AGENT_MUST_SIGN0x1A05Your request was not signed. You must sign all requests sent to an agent by checking the 'Sign' box when sending your request by mail.PKG_AGENTerror
Enter description of method which will be displayed to user.
Method description:
MethodDescriptionDescription that will appear in keyword lists
Enter internal method identifier which will be used by Event task.
Method name:
MethodNameQueue Name that Method consumes
Basics
gears.gif
Edit Document
Categori_zeK
Send Docu_ment
_Forward
_Move to Folder...
_Remove from Folder...
2S3S4S6S13S18S22S26R28S33S38S
ok.gif
CancelF
SaveOptions
1S2S3S
cancel.gif
Edit
0S0E
edit.gif
Edit Document
Categori_zeK
Send Docu_ment
_Forward
_Move to Folder...
_Remove from Folder...
2S3S4S6S13S18S22S26R28S33S38S
CancelF
SaveOptions
1S2S3S
Edit
0S0E
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
$Author
HideLevel
$Info
$WindowTitle
$AppHelpFormula
$WebFlags
$$Script_O
$$ScriptName
$Body
$V5ACTIONS
$ACTIONS
New statistic
StatNameJ
(Help)
events5_f_statistic
0S0E
"Small Fonts
Lotus Product
Statistic
StatsAnalysisInterval
1S2S
Statistic Description
HideLevel
1S2S
Enter new statistic name here. Statistic name must be in the format of 'Facility.Statname'.
Statistic name:
StatNameName of statistic.
Is type of statistic text, number or time? Select one.
Data type:
Number
TypeStatistic type.
TextNumberTime
Enter type of unit statistic is. Example: 'bytes'.
Statistic unit:
UnitsProper units for this statistic (e.g., bytes, errors, messages)
Enter description of statistic.
Statistic description:
DescriptionDescription of this statistic
Basics
Number
Notes
1S2S3S4S5S6S
Enter the normal value of statistic. Default: 'Varies'.
Normal value:
Varies
NomalValuesNormal value given to this statistic.
Is this statistic useful for setting thresholds?
Useful for thresholds?
Number
Useful
2S3S4S6S8S
UsefulIs this statistic useful for setting thresholds?
YesNo
Useful
1S2S
Select suggested operator. 'Percent of' is based on the percentage of a statistic. If we go below x% of value we set an alarm. All others are checked against actual value given.
Threshold operator:
OperatorSend alarm when statistic is less than (<), greater than (>), or a multiple of (%) the threshold.
Less than | <Greater than | >Multiple of | %Percent of | *
Useful
Operator
1S2S3S4S5S6S
Enter suggested value we are comparing statistic against.
Threshold value:
Useful
Operator
1S2S3S4S5S6S
Enter suggested percentage of value.
Threshold percentage:
Threshold_1Enter the desired threshold value for this statistic
Threshold_2Enter the desired threshold percentage for this statistic
Operator
Operator
Percent of
Threshold_1
Threshold_2
3S4S5S6S7S8S
ThresholdEnter the desired threshold value for this statistic
Hidden
Enter suggested severity for this statistic.
Event severity:
SeverityEvent severity when this threshold is exceeded.
51MessageERR_BSAFE_REQUIRES_NONFLATID0x1756This request is not supported with the version of your ID file. An ID file containing a hierarchical name is required.PKG_BSAFEerror2
51MessageERR_BSAFE_INCOMPLETE_CERTTABLE0x1758There are not enough certificates attached to the document to verify the identity of its signerPKG_BSAFEerror2
51MessageERR_BSAFE_MUSTBE_HIERARCHICAL0x1773This request is not supported for the specified ID file. An ID file containing a hierarchical name is required.PKG_BSAFEerror2
51MessageERR_FT_FIELD_NOT_INDEXED0x0F24The query contains a new number or date field that was added after the full text index was created. Please re-create the full text index to use this field in queriesPKG_FTerror9
1MessageERR_POOLFULL0x0417Insufficient memory - a Notes memory pool is full (P)PKG_MISCerror6
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
########################################
1MessageERR_INVALID_POOL0x0419Index (pool) has been corrupted - will be rebuilt automatically when database is closed or server is restartedPKG_MISCerror6
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###########################################
1MessageERR_MEMBER_NUMBER0x041EIndex (link) has been corrupted - will be rebuilt automatically when database is closed or server is restartedPKG_MISCerror6
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##########################################
1MessageERR_ACL_VERSION0x0420Access control list version is unsupportedPKG_MISCerror6
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
################################################
1MessageERR_ACL_CORRUPT0x0421Access control list is corruptedPKG_MISCerror6
51MessageERR_NETBIOS_UNIT_PROBLEM0x1C02A NetBIOS network could not be found for the configured unit number. Load the NetBIOS software for your network, or change the unit number with the Port Setup dialog.PKG_NETDRVerror
51MessageERR_BV_NOT0x1C1BThe Notes Server for Windows does not support the use of Banyan's native Vines protocol stack. Instead, you should load Banyan's NETBIOS and configure this LAN port to use it.PKG_NETDRVerror
51Message0x1988The name of the authority issuing the Change Request does not match the certifier name in the supplied certificatePKG_SECUREerror2ERR_SECURE_CHANGE_CERT_ISSUER_MIPKG_SECURE
51Message0x198DThe public keys specified in the Change Request do not match those specified in the new certificatePKG_SECUREerror2ERR_SECURE_CHANGE_CERT_KEY_MISMAPKG_SECURE
51MessageERR_SECURE_UPGRADE_ONLY0x198FThe Change Request specifies a name or key change, but the change allowed is an update from a flat to a hierarchical namePKG_SECUREerror2
51Message0x1991When upgrading an name from flat to hierarchical, the flat name must match the first component in the hierarchical namePKG_SECUREerror2ERR_SECURE_UPGRADE_NAME_MISMATCHPKG_SECURE
51Message0x1992When moving a name in the name hierarchicy, the first component of the old and new names must be the samePKG_SECUREerror2ERR_SECURE_CHANGE_ILL_MOVE_NAMESPKG_SECURE
51Message0x1995The old name in the Change Request does not match the name trying to be changedPKG_SECUREerror2ERR_SECURE_CHANGE_WRONG_OLD_NAMEPKG_SECURE
51Message0x19CBThe name in the Change Request field does not match the name in the Certificate fieldPKG_SECUREerror2ERR_SECURE_CERT_CHANGEREQ_MISMATPKG_SECURE
51MessageERR_XPC_TOO_MANY_PORT_ERRORS0x143CExcessive Port or CRC errors experienced on the last connection. Try reducing the Maximum Speed setting on the port.PKG_XPCerror1
51MessageERR_XPC_TOO_MANY_REXMITS0x143DExcessive retransmissions experienced on the last connection. The remote end of the connection may have been experiencing port errors.PKG_XPCerror1
StatisticServer.TaskTextnoneThis statistic appears once for every task running on the server, listing the name of the task and the task status.VariesNo
cAStatisticDisk.Swapdisk.FreeNumberbytesNumber of free bytes on the disk that contains the server's swap file.VariesYes<
1Since the server uses a swap file for its virtual memory, this is a very important threshold. If it is crossed, either move the swap file to a disk with more free space, or move/delete other files on the disk.Yes
cAStatisticDisk.E.FreeNumberbytesFree space on drive E:VariesYes<
3Disk.E.SizeThis indicates that there is not much disk space left on drive E: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
cAStatisticDisk.C.FreeNumberbytesFree space on drive C:VariesYes*
3Disk.C.SizeThis indicates that there is not much disk space left on drive C: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.Yes
cAStatisticDisk.D.FreeNumberbytesFree space on drive D:VariesYes<
3Disk.D.SizeThis indicates that there is not much disk space left on drive D: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
@StatisticMAIL.DeadNumbermessagesNumber of dead (undeliverable) messages in MAIL.BOX0Yes>
2Dead mail messages may indicate a routing or addressing problem. Inspect the dead messages in the servers mailbox and correct any problems that are indicated. Reroute and delete the dead messages when done.Yes
cAStatisticMem.SwapFile.SizeNumberbytesSize (in bytes) of system swap file5,000,000Yes>
3This can indicate a large load on the server and therefore possible performance degradation. In itself, this is not a dangerous condition, but it is something to be noted and watched for.No
@StatisticServer.Sessions.DroppedNumberdropped sessionsSessions dropped in mid-transaction.VariesYes>
4This usually indicates that server performance is very slow, and users are aborting transactions before they complete. You may need to upgrade your Notes server hardware or decrease the load on it.No
4@StatisticMAIL.WaitingNumbermessagesNumber of outgoing mail messages currently in MAIL.BOX waiting for transferVariesYes>
2If there are a lot of mail messages waiting to be routed, it may indicate a problem with the mailer or the connections that it uses. Inspect the server log for any warning or failure messages from the router and correct the problems indicated. Check that all necessary server links are operational.Yes
1The amount of free memory available to the server is dangerously low. In OS/2, this number includes free disk space because of virtual memory capability. Increase free disk space on the drive that contains the server's swap file.Yes
StatisticComm.NumOldSessionsClosedNumberclosed sessionsNumber of sessions closed by the Notes server to accommodate new users.VariesYes>
3This indicates that there either was a temporary surge in user activity on the given server or, more likely, that there are too many people trying to access this server. This will cause a decrease in response time from the server and may indicate the need for additional Notes servers.No
StatisticMAIL.TransferFailuresNumbermessagesNumber of mail messages router was unable to transfer.VariesYes>
2This indicates that the router has been unable to transfer some mail messages and the senders of those messages have received non-deliverable reports. Inspect the non-deliverable reports and the server log file and correct any problems that are indicated.No
StatisticDisk.SYS.FreeNumberBytesFree space on NetWare SYS Volume.VariesYes<
2Disk.SYS.SizeThis indicates that there is not much disk space left on Vol SYS: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.Yes
StatisticDisk.Vol0.FreeNumberByteFree space on NetWare Volume 0.VariesYes<
3Disk.Vol0.SizeThis indicates that there is not much disk space left on Vol0: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
StatisticDisk.Vol1.FreeNumberByteFree space on NetWare Volume 1.VariesYes<
3Disk.Vol1.SizeThis indicates that there is not much disk space left on Vol1: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
StatisticDisk.Vol2.FreeNumberByteFree space on NetWare Volume 2.VariesYes<
3Disk.Vol2.SizeThis indicates that there is not much disk space left on Vol2: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
StatisticDisk.Vol3.FreeNumberByteFree space on NetWare Volume 3.VariesYes<
3Disk.Vol3.SizeThis indicates that there is not much disk space left on Vol3: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
cAStatisticDisk.G.FreeNumberbytesFree space on drive G:VariesYes<
3Disk.G.SizeThis indicates that there is not much disk space left on drive G: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
cAStatisticDisk.F.FreeNumberbytesFree space on drive F:VariesYes<
3Disk.F.SizeThis indicates that there is not much disk space left on drive F: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
cAStatisticDisk.H.FreeNumberbytesFree space on drive H:VariesYes<
3Disk.H.SizeThis indicates that there is not much disk space left on drive H: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
cAStatisticDisk.I.FreeNumberbytesFree space on drive I:VariesYes<
3Disk.I.SizeThis indicates that there is not much disk space left on drive I: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
cAStatisticDisk.J.FreeNumberbytesFree space on drive J:VariesYes<
3Disk.J.SizeThis indicates that there is not much disk space left on drive J: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
cAStatisticDisk.K.FreeNumberbytesFree space on drive K:VariesYes<
3Disk.K.SizeThis indicates that there is not much disk space left on drive K: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
cAStatisticDisk.L.FreeNumberbytesFree space on drive L:VariesYes<
3Disk.L.SizeThis indicates that there is not much disk space left on drive L: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
cAStatisticDisk.M.FreeNumberbytesFree space on drive M:VariesYes<
3Disk.M.SizeThis indicates that there is not much disk space left on drive M: for databases and other uses. Compact, delete, or move some files to free up disk space before it becomes a serious problem.No
StatisticServer.Cluster.AvailabilityIndexNumberCurrent percentage index of a server's availability. Value range is 0-100. Zero (0) indicates no available resources; a value of 100 indicates server completely available.VariesNo
StatisticServer.Cluster.AvailabilityThresholdNumberCurrent setting of a server's availability threshold. When a server's availability index drops below its availability threshold, the server becomes BUSY.VariesNo
Name of the default port that is used for intracluster network traffic. An asterisk indicates that there is no default port and that any available active port can be used.
StatisticServer.Cluster.Trans.IntervalsUseInAvgNumberCurrent setting for the number of intervals used to capture transaction data used to calculate workload balance.VariesNo
StatisticServer.Cluster.OpenRedirects.LoadBalance.SuccessfulNumberNumber of times that a server successfully redirects a client to another cluster member after the client tries to open a database by replica ID when the server is BUSY.VariesNo
StatisticServer.Cluster.OpenRedirects.LoadBalance.UnsuccessfulNumberNumber of times that a server is unable to redirect a client to another cluster member after the client tries to open a database by replica ID when the server is BUSY.VariesNo
StatisticServer.Cluster.OpenRedirects.LoadBalanceByPath.SuccessfulNumberNumber of times that a server successfully redirects a client to another cluster member after the client tries to open a database by pathname when the server is BUSY.VariesNo
StatisticServer.Cluster.OpenRedirects.LoadBalanceByPath.UnsuccessfulNumberNumber of times that a server is not able to redirect a client to another cluster member after the client tries to open a database by pathname when the server is BUSY.VariesNo
StatisticServer.Cluster.OpenRedirects.Failover.SuccessfulNumberNumber of times that a server successfully redirects a client to another cluster member after the client fails to open a database by replica ID.VariesNo
StatisticServer.Cluster.OpenRedirects.Failover.UnsuccessfulNumberNumber of times that a server is not able to redirect a client to another cluster member after the client fails to open a database by replica ID.VariesNo
StatisticServer.Cluster.OpenRedirects.FailoverByPath.SuccessfulNumberNumber of times a server successfully redirects a client to another cluster member after the client fails to open a database by pathname.VariesNo
StatisticServer.Cluster.OpenRedirects.FailoverByPath.UnsuccessfulNumberNumber of times a server is not able to redirect a client to another cluster member after the client fails to open a database by pathname.VariesNo
StatisticServer.Cluster.OpenRequest.DatabaseOutOfServiceNumberNumber of times a client tries to open a database that is marked as out of service on the serverVariesNo
StatisticServer.Cluster.OpenRequest.ClusterBusyNumberNumber of times that a client tries to open a database on the server when the server is BUSY, and on every available member also.VariesNo
@StatisticReplica.FailedNumberreplication attemptsNumber of attempted replications that returned some kind of error.VariesYes>
2This is a warning that Notes is having trouble replicating your databases with other servers. Check the log file for replicator errors and fix the indicated problem.No
@StatisticReplica.Cluster.Retry.SkippedNumberNumber of times the Cluster Replicator did not attempt replication because it knew the server was unreachable or the database inaccessibleNo
@StatisticReplica.Cluster.WorkQueueDepth.AvgNumberAverage number of modified databases in the queue waiting to be replicated by the Cluster Replicator to other servers. No
@StatisticReplica.Cluster.WorkQueueDepth.MaxNumberMaximum number of modified databases in the queue waiting to be replicated by the Cluster Replicator to other servers. No
@StatisticReplica.Cluster.WorkQueueDepthNumberCurrent number of modified databases in the queue waiting to be replicated by the Cluster Replicator to other servers. No
StatisticMTA.ccMail.WaitingRecipientsNumberRecipientsNumber of Responsible Recipients in waiting mail held in Inbound and Outbound work queues.VariesNo>
D@CommWarningLowThere is a mistake in the command file to the left of the equal sign in an X=X statement. For example, if you wanted to insert the command SETUP=ATS0=0, but you forgot the word "SETUP" and the first equal sign, Notes would assume that ATS0 represented an intended variable. A typo in the variable, such as "SETTUP," will also result in this message. Edit the modem command file to correct the problem.
41MessageERR_XPC_INV_SCRIPT_ARG0x1428Modem command file variable is not recognizedPKG_XPCerror1
F@CommWarningLowIn your last edit of the command file, you entered or omitted a character which apparently Notes does not understand. For example, the backslash character, if typed by itself in a command file for a modem that recognizes the backslash as a legal command character, will produce this error message. This is because Notes normally expects the backslash to be followed by a 3-digit octal integer (see A Sample Modem Command File). The two exceptions to this are when either the backslash or the caret are part of the extended command set for your particular modem, in which case you must preface them with a backslash. Example: RTS/CTS ENABLED=AT\\Q2 is a legal sequence, but RTS/CTS ENABLED=AT\Q2 is not.Edit the modem command file to correct the problem.
41MessageERR_XPC_INV_SPECIAL_CHAR0x142DModem command file contains an illegal character sequencePKG_XPCerror1
21MessageERR_CANNOT_MULTISERVER0x092BAt least one network port requires the Notes Server to be restricted to a single process, and that process has exceeded the maximum number of threads.PKG_SERVERerror7
G@ServerFailureThe server has an access list that specifically allows or denies access to certain groups.If the server has an access list, ask the Notes administrator if it can be modified to give you access to the server.
21MessageERR_NO_SERVER_ACCESS0x092EYou are not authorized to use the serverPKG_SERVERerror7
L@ServerFailureThe Server document in the Name & Address Book is either missing or inaccurate.Check the Name & Address Book. Add a Server document for this server (as long as it is a server in this domain). If a document exists, check the spelling of the server name and correct it if necessary.
21MessageERR_NO_SERVER_NAME0x0938Name & Address database does not contain a server entry for this serverPKG_SERVERerror7
Database Fixup is running on the databases in question.You do not have to do anything. See the Notes Administrator's Guide for more information about the Database Fixup program.ERR_FIXUP_BEGINPKG_SERVERerror1
@]@Begin scan of databases to be consistency checked
O@ServerWarningHighMessage0x093FERR_FIXUP_ERRPKG_SERVER7errorError checking database <Database Name>1An error was encountered by the FIXUP program while attempting to fix the database indicated.Check the additional error information reported for the cause of the error.
@X@ServerFailure1The database replicating program is not currently running on the server.Load the replicator explicitly from the server console using the LOAD REPLICATOR command. The replicator should be included in the ServerTasks line in NOTES.INI so that it is started automatically when the server starts.
The mail routing program is not currently running on the server.Load the router explicitly from the server console using the LOAD ROUTER command. The router should be included in the ServerTasks line in NOTES.INI so that it is started automatically when the server starts.1MessageERR_CONSOLE_NO_ROUTER0x0962PKG_SERVERerror7
X@ServerWarningLowMessage0x0963ERR_CONSOLE_CANT_TELLPKG_SERVER7error1A TELL command was entered at the server console for a task that either does not exist or does not accept input from TELL commands.Retry the command making sure that the task name is spelled correctly. The server command SHOW TASKS will list the currently executing tasks. See the Notes Administrator's Guide for more information on server tasks and commands.
@]@The <Taskname> task either does not exist or does not accept "Tell" commands. <Error Message>
[@ServerFailureMessage0x096EERR_INIT_CANT_LOADPKG_SERVER7errorError attempting to load or run <Program Name> : <Additional Error Information>1The server was unable to load the reported program.See the additional error information reported for the cause of the failure. Make sure the program name is spelled correctly and that the program does exist.
@ServerFailureThe server has an access list for this network or serial port and you are not among those who have access.Ask the Notes administrator if the access list can be modified to give you access to the server on this port.
21MessageERR_NO_SERVER_ACCESS_PORT0x0903You are not authorized to use the server on this portPKG_SERVERerror7
21MessageERR_CL_MSG_TOO_SMALL0x0906A transient network error or network adapter failure has truncated a message from a client. If it recurs, run the appropriate adapter diagnostics.PKG_SERVERerror7
21MessageERR_PROTOCOL0x0908This message does not conform to server's protocol requirements. Client and server may be running incompatible versions of the productPKG_SERVERerror7
2MessageERR_BSAFE_ILLUSE_CERTIFIER0x1759Illegal use of a Certifier ID filePKG_BSAFEerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
"@ServerNormalThe command you typed at the server console is incomplete or incorrect.Type the command again. Type HELP at the prompt or check the Notes Administrator's Guide for more information about valid server commands and arguments.
51MessageERR_AMBIGUOUS0x0909Command or option is ambiguousPKG_SERVERerror7
41MessageERR_VERSION_MISMATCH0x090CServer and client are running different versions of the product. Install the same version on all communicating servers and workstations.PKG_SERVERerror7
1@ServerWarningLowThe command you typed at the server console is incomplete or incorrect.Type the command again. Type HELP at the prompt or check the Notes Administrator's Guide for more information about valid server commands and arguments.
41MessageERR_INSUFF_ARGUMENTS0x0911Insufficient arguments. Enter 'HELP' for the correct syntax.PKG_SERVERerror7
3@ServerWarningLowThe command you typed at the server console is incomplete or incorrect.Type the command again. Type HELP at the prompt or check the Notes Administrator's Guide for more information about valid server commands and arguments.
41MessageERR_NOMATCH0x0913Command or option is not recognizedPKG_SERVERerror7
@SecurityWarningHighThe server you tried to access doesn't have a certificate in common with your User ID, so you were denied access to that server. Your ID and the server's ID need to be certified by a certifier you both trust.
Note: You may see this message even if you're only editing a mail document locally while waiting to get your new certificate(s) back. If you press F9, Notes tries to interpret the mail address you have entered in anticipation of your choosing Mail - Send.Ask the Notes certifier if your ID can be recertified so that you can access the server. Then choose Mail - Send User ID - Request Certificate. Once the certifier has returned your ID with the new certificate attached, you'll be able to use the server.
31MessageERR_SECURE_NOCLIENTCERT0x1905Your ID has not been certified to access the serverPKG_SECUREerror2
&@SecurityFailure1A user authenticates with a server by demonstrating that he can decrypt a message sent by the server and encrypted with the user's public key. This error message indicates that the user claimed to own a particular public key, but then could not demonstrate that he could decrypt the message. This may indicate that the user's ID file has been corrupted. It may also indicate that an attacker claiming to be the user is attempting to break into the server.If the user's ID has been corrupted, restore it from a backup. If none exists, the user will need a new ID. If the user should have access, make sure that he or she has the proper certificates and is in the proper ACLs for the server in question.
2MessageERR_SECURE_INVRESPONSE0x190BRemote user failed authenticationPKG_SECUREerror2
0@SecurityFatal A user authenticates with a server by demonstrating that he can decrypt a message sent by the server and encrypted with the user's public key. This error message indicates that the user claimed to own a particular public key, but then could not demonstrate that he could decrypt the message. This may indicate that the user's ID file has been corrupted. It may also indicate that an attacker claiming to be the user is attempting to break into the server. If the user's ID has been corrupted, restore it from a backup. If none exists, the user will need a new ID.
11MessageERR_SECURE_FRAUD0x1910Remote user's identity is fraudulentPKG_SECUREerror2
@MailFailureMessage0x1108ERR_ROUTER_NOROUTETOSERVERFROMPKG_ROUTER3errorNo route found to server <Destination Server> from server <Initial Server>. Check Server and Connection documents in Name & Address Book.1The mail router cannot find a route to server X based on the network topology described in the public Name & Address Book.Check the Name & Address Books for all servers involved, to ensure that the Remote Connection documents are correct (with mail routing enabled and correct phone numbers). Also check the Name & Address Books' Server documents for correct information.
If all network names are correct but there is still a problem, try the following: Based on the information in the Servers view of the Name & Address Book, draw a diagram that shows every network and the Notes servers attached to these networks. Switch to the Connections view. For each document that specifies Mail Routing on a COM port, draw an arrow on your diagram from the originating server to the recipient server. Draw the arrow only in the direction for which the mail routing is set up. When you are finished, there should be arrows pointing in both directions. See if there are any servers that cannot reach the recipient's server (based on your diagram). Look for either a missing connection or a misnamed network. Edit the documents in the Name & Address Book to correct the problem so that all servers can reach all other servers.
"@MailFailureMessage0x1109ERR_ROUTER_NOROUTETODOMAINFROMPKG_ROUTER3errorNo route found to domain <Domain Name> from server <Server Name>. Check Server, Connection and Domain documents in Name & Address Book.Notes can't find a way to transfer mail from the sender's domain to the recipient's domain. A Connection document must exist for mail routing in both directions, or a non-adjacent Domain document needs to exist that shows a way to bridge the domains.Ensure that the sender server's Name & Address Book has a Connection document that specifies mail routing from a server in its domain to a server in the recipient server's domain, and that the Name & Address Book in the recipient's domain has a Connection document that specifies mail routing from a server in its domain to a server in the sender's domain. If they are non-adjacent domains, verify that a Non-adjacent Domain document exists in each domain's Name & Address Book.
If there is still a problem, ensure that the recipient's Person document contains a MailDomain field in all replicas of the Name & Address Book (or Books, if multiple books are used). Redesign the Name & Address Book if necessary (choose Design - Replace Design).
$@MailFailureMessage0x110AERR_ROUTER_NOROUTETODOMAINVIAPKG_ROUTER3errorNo route found to domain <Domain Name> from server <Server Name> via server <Server Name>. Check Server, Connection and Domain documents in Name & Address Book.Notes can't find a way to transfer mail from the sender's domain to the recipient's domain. A Connection document must exist for mail routing in both directions, or a non-adjacent Domain document needs to exist that shows a way to bridge the domains.Ensure that the sender server's Name & Address Book has a Connection document that specifies mail routing from a server in its domain to a server in the recipient server's domain, and that the Name & Address Book in the recipient's domain has a Connection document that specifies mail routing from a server in its domain to a server in the sender's domain. If they are non-adjacent domains, verify that a Non-adjacent Domain document exists in each domain's Name & Address Book.
If there is still a problem, ensure that the recipient's Person document contains a MailDomain field in all replicas of the Name & Address Book (or Books, if multiple books are used). Redesign the Name & Address Book if necessary (choose Design - Replace Design).
&@MailFailureMessage0x110BERR_ROUTER_DELIVERY_FILEPKG_ROUTER3errorError delivering to <Server Name> <Mail File Name>; <Additional Error Information>1The router was unable to deliver mail to the specified file on the specified server.See the additional error information reported for the cause of the failure.
(@MailFailureMessage0x110CERR_ROUTER_TRANSFER_FILEPKG_ROUTER3errorError transferring to <Database Name>; <Additional Error Information>1The router was unable to access the indicated database.See the additional error information reported for the cause of the failure.
,@MailFailure1The connection records between servers have caused the mail router to forward a message between too many servers in search of the destination server. Often this means that there is a conflict in the routing instructions, such that a message bounces back and forth between two servers without reaching its destination.
This can happen if two servers choose different routes when making their routing decision. Server A consults its routing table and decides the lowest-cost route to Server E is through Server B. Server B consults its routing table and decides the lowest-cost route to Server E is through Server A. Thus, the message bounces back and forth between the two servers until they reach the maximum hop count of 25.Check the delivery failure report which will indicate which servers the message was transferred through. Look for a possible routing loop and correct the connection records so that a more direct path from the source server to the destination server can be found. You can also try restarting one of the servers or modifying its Name & Address Book to reinitialize its routing table.
2MessageERR_ROUTER_ROUTING_LOOP0x110EMaximum hop count exceeded. Message probably in a routing loop.PKG_ROUTERerror3
41MessageERR_CACHE_VERSION0x1601Replication history version not supported by this replicator. Use File Database Copy (Replica) to clear the history.PKG_REPLerror4
@ReplicaWarningLowAlthough the database was scheduled to be replicated, replication has been disabled. The database manager or administrator has selected "Disable replication for this database" in the Replication Settings dialog box. Usually this is a temporary situation, initiated by a problem on the database. The manager wants to examine the database (for corruption, possibly) before allowing it to replicate out.Check with the database manager to see what the problem is. He or she can de-select "Disable replication for this database" when the problem is fixed to restart replication.
41MessageERR_REP_DISABLED0x1605Replication is disabled for this databasePKG_REPLerror4
An attempt was made to use selective replication with a database that resides on a server running Release 2 of Notes.Selective replication can only be used on servers running Notes Release 3 or higher. Upgrade the Release 2 server to Release 3, replicate the database from a Release 3 server, or remove the selective replication from the desired database.LOG_NO_SELECTIVE_REPPKG_REPLerror1
@]@Selective replication is not available with Version 2 servers: <Name>. If you wish, you may use File Database Information Replication Selective Advanced... to delete the selective replication information.
4@ReplicaFailureMessage0x1614LOG_REPLINIT_ERRPKG_REPL4errorReplicator was unable to initialize <Destination Server database> (from <Source Server database>):1The replicator was unable to initialize the destination database using the source database. See additional error information reported for more information.Look in the EVTTYPES.NMF database for the additional error information that was reported with this error.
6@ReplicaFailureMessage0x1616LOG_REPL_SRC_ACCESSPKG_REPL4errorNot replicating <Destination Server database> (not authorized to read <Source Server database>)1Destination Server has less than Reader access in the Source Server database. Check the Replication Events view in the Destination Server's log file to find out which database has the problem. Update the Destination Server's access to Reader or above in the Source Server's database either by modifying the server's access or including the server in an appropriate group.
7@ReplicaFailureMessage0x1617LOG_REPL_NOTES_ONLYPKG_REPL4errorAccess control is set in <Destination Server database> to not replicate forms or views from <Source Server database>The Source Server doesn't have enough access to replicate Design changes--it currently has Editor access or lower in the Destination Server database. (Designer access is needed to replicate changes to views and forms; Manager access is needed to replicate changes to the ACL.) If it's appropriate that the destination database receives design changes, change the destination database's access control list to give the Source server Designer access or higher.
8@ReplicaFailureMessage0x1618LOG_REPL_NEW_NOTES_ONLYPKG_REPL4errorAccess control is set in <Destination Server database> to not replicate forms, views or edits from <Source Server database>.The Source Server doesn't have enough access to replicate design changes and modified documents--it currently has Author access or lower in the Destination Server database. (Editor access is needed to replicate changes; Designer access is needed to replicate changes to views and forms; Manager access is needed to replicate changes to the ACL.)If it's appropriate that the destination database receives design changes and modified documents, change the destination database's access control list to give the Source server Editor access or higher.
9@ReplicaFailureMessage0x1619LOG_REPL_NO_UPDATEPKG_REPL4errorAccess control is set in <Destination Server Pathname> to not allow replication from <Source Server Pathname>1The source server doesn't have enough access in the destination database's ACL to replicate the changes into the destination database.Check the Replication Events view in the Destination Server's log file to find out which database has the problem. If it's appropriate that they replicate, change the destination database's access control list to give both servers sufficient access. (Note that Editor access is needed to replicate changes to documents; Designer access is needed to replicate changes to views and forms; Manager access is needed to replicate changes to the ACL.)
=@ReplicaFailureMessage0x161DLOG_REPL_FILE_ERRPKG_REPL4errorUnable to replicate <Database Name>1The replicator was unable to replicate the reported database for the reported reason.See the additional error information reported for the cause of the failure.
>@ReplicaFailureMessage0x161ELOG_REPL_PARTIALPKG_REPL4errorPartially replicated <Destination Server database> (due to previously reported error)1Check the Replication Events view in Destination Server's log file to find out which database was partially replicated. The replication history is not written for this database until the error is corrected, producing longer replication times.
?@ReplicaFailureMessage0x161FLOG_REPL_NOTE_ERRPKG_REPL4error1The replicator was unable to store a document in the reported database for the reported reason.See the additional error information reported for the cause of the failure.
@]@Unable to open note on <Source Database> (NoteID = <Value>) to store in <Destination Database> (NoteID = <Value>):
@@ReplicaFailureMessage0x1621LOG_REPL_CACHE_NGPKG_REPL4errorReplication history in <Destination Server database> is corrupted and cannot be repaired. Please make a new replica copy of the database.
A@ReplicaFailureMessage0x1622LOG_REPL_DEST_PRIVSPKG_REPL4error1The database that is being replicated has a document, view, or form that has an access role assigned to it and the server has not been given all access roles.Modify the ACL to give the server enough access to replicate all documents.
@]@Replication of <Path Name> was cancelled by the user.
B@ReplicaFailureMessage0x1624LOG_REPL_CONFLICT_ERRPKG_REPL4error1The replicator encountered a problem when trying to resolve a conflict of document updates between two databases.See the additional error information reported for the cause of the failure.
@]@Replicator found Duplicate Conflict note in <Destination Path Name> (NoteID = <Value>) from <Source Path Name> (NoteID = <Value>):
B@ReplicaFailureMessage0x1625LOG_REPL_ERRORPKG_REPL4errorUnable to replicate with server <Server Name>1The other server is not available. See the additional information reported with this error.Check to see whether the other server has crashed. If not, check the Log to see if a network error occurred when your server attempted to contact the other server. A network error can be due to a problem with network hardware or software. If you find a network error message, contact your network administrator.
Check the EVTTYPES.NMF database regarding the additional information reported with this error.
C@ReplicaWarningLowMessage0x1627LOG_REPL_ACL_ERRPKG_REPL4errorUnable to copy access control list into <Destination Database> from <Source Database>:1The replicator was unable to store a document in the reported database for the reported reasonSee the additional error information reported for the cause of the failure.
D@ReplicaWarningHighMessage0x1628LOG_REPL_INIT_ACLPKG_REPL4errorUnable to copy access control list into <Destination database>1See the additional information reported with this error.Check the EVTTYPES.NMF database regarding the additional information reported with this error.
E@ReplicaWarningHighMessage0x162BLOG_REPL_DUPLPKG_REPL4error1There are duplicate copies of a document in the database specified.This is normally not a problem but you may want to delete duplicate documents to avoid confusion and save disk space.
@]@Replicator noticed duplicate document in <Path Name> ( First Note ID = <Value>, Second Note ID = <Value>, UNID = <Value> : <Value> )
F@ReplicaFailureMessage0x162DLOG_REPL_NOTE_DEST_ERRPKG_REPL4error1The replicator was unable to store a document in the reported database for the reported reason.See the additional error information reported for the cause of the failure.
@]@Unable to store document in <Destination Path Name> (NoteID = <Value>) from <Source Path Name> (NoteID = <Value>):
G@ReplicaWarningLowMessage0x162FLOG_REP_DISABLEDPKG_REPL4errorReplication is disabled for <Database Name>1Although the database was scheduled to be replicated, replication has been disabled. The database manager or administrator has selected "Disable replication for this database" in the Replication Settings dialog box. Usually this is a temporary situation, initiated by a problem on the database. The manager wants to examine the database (for corruption, possibly) before allowing it to replicate out. Check with the database manager to see what the problem is. He or she can de-select "Disable replication for this database" when the problem is fixed to restart replication.
C@SecurityWarningHighA safe copy of your User ID file has only enough information to collect certificates to be merged into your actual ID. It can't be used to access servers.Select another ID file and try the operation again.
31MessageERR_BSAFE_ILLUSE_SAFECOPY0x1727The ID file is a safe copy and cannot be used for that purpose.PKG_BSAFEerror2
E@SecurityFailureNotes can't create the ID file because the disk is write-protected or full, you're trying to write to a nonexistent drive, or Notes can't get access to a file server's disk.Make sure you're writing to the correct drive or that the drive has enough room, and try again. If the problem is access to a file server, see your Notes administrator.
21MessageERR_BSAFE_ID_CREATE0x172AID file cannot be createdPKG_BSAFEerror2
E@SecurityFatal1The specified file was corrupted and is no longer valid, or is not an ID file.
NOTE: Always keep a backup of your User ID file on floppy disk, particularly after each time you receive certificates allowing you access to additional Notes servers. Use Windows, PM, or the Macintosh Finder to replace the corrupted ID file with a copy of your backup ID file; or ask your Notes administrator for a new User ID. If you must get a new ID, you need to get new certificates as well. If you had any encryption keys from other Notes users and still need them, ask those users to send them to you again.
1MessageERR_BSAFE_ID_TRUNC0x172BThe specified ID file has been corrupted, or is not an ID filePKG_BSAFEerror2
31MessageERR_BSAFE_MERGE_NONCOPY0x1750The certificate(s) have not been issued to you and cannot be merged into your ID file. They have been issued toPKG_BSAFEerror2
8@CommFailureThe VinesServiceName variable in NOTES.INI is set, and the item name does not match the Notes service name.Check to see which is correct and make the correction in the other name.
21MessageERR_BV_SVCNAME_NOT_NOTESNAME0x1C18VINES service name does not match Notes name.PKG_NETDRVerror
9@CommFailureThe server name violates the accepted syntax for VINES StreetTalk names.Check the server name against StreetTalk naming conventions described in your Banyan documentation.
21MessageERR_BV_INVALID_STREETTALK_NAME0x1C19Server name is not a valid VINES StreetTalk name.PKG_NETDRVerror
@MailFailureMessage0x1104ERR_ROUTER_NOTUNIQUEPKG_ROUTER3errorRecipient user name <User Name> not unique. Several matches found in Name & Address Book.1There is more than one document in the Name & Address Book for user <User Name>, usually meaning there are several people with the same name. Notes needs more information in order to route the mail message.Edit the mail document to include a domain name, as in Alex Thomas@Sales, if the person is in another mail domain. Remove any duplicate Person documents from the Name & Address Book.
@MailFailureMessage0x1105ERR_ROUTER_NOSUCHUSERPKG_ROUTER3errorUser <User Name> not listed in public Name & Address Book1Either the recipient's name is misspelled in the mail message or the Name & Address Book, the Person document is missing, or the recipient is not a Notes user.Check the spelling of the recipient's name; the sender may have misspelled it.
If the spelling is correct, check and correct the existing Person document.
If there is no Person document, but the recipient is a Notes user, create a new Person document.
If the recipient is not a Notes user, create a new ID if needed.
@MailNormalThe server has detected that new mail messages have been delivered to your mail file.Use Mail - Open or Mail - Scan Unread to check the messages.
51MessageERR_ROUTER_NEWMAIL0x1107New mail has been delivered to you!PKG_ROUTERerror3
@ResourceFatalYou tried to create or write to a file in a directory or subdirectory or on another drive to which you don't have write access.
For example, you may be trying to create a file on a write-protected disk or write to a directory whose files have the read-only attribute set.Check your access to the medium and try again.
11MessageERR_PROTECTED0x0102Cannot write or create file (file or disk is read-only)PKG_OSerror5
@ResourceFailure1You either tried to open a database whose file does not exist or was deleted, or to import or attach a file which is not in the specified directory. This message may also appear if the network connection has been lost.Make sure the specified directory and file name are correct, and check the network connection. If it is a database, check the Database Catalog to verify the name. If the database is on a floppy disk, insert that disk into the drive and try opening the database again.
2MessageERR_NOEXIST0x0103File does not existPKG_OSerror5
"@ResourceWarningHighAn internal consistency was detected, indicating that a file may have been damaged.The author of a damaged document should delete the document and re-create it. (Replicas of the document may also be damaged and should be checked.)
31MessageERR_TRUNC0x0109File truncated - file may have been damagedPKG_OSerror5
3@ResourceWarningHighThe file name is longer than 8 characters.
Notes will only accept eight-character file names. Databases whose file names are eight characters or less are the only ones that will appear in the Open Database dialog box.Rename any databases whose file names are too long.
31MessageERR_INV_FILE_NAME0x0113File name too long or invalid file name syntaxPKG_OSerror5
5@ResourceFailureMessage0x0115ERR_OS_ERRORPKG_OS5errorAn OS/2 error has occurred. The code is <Decimal Error Code> (<Hex Error Code>). Consult your OS/2 documentation or ask for assistance.1When an error occurs at the operating system level, OS/2 returns a code number that can help identify problems such as too many open files, no more disk space, or not enough memory.The IBM booklet "Problem Determination Guide for the Service Coordinator" lists these codes and their meanings.
;@ResourceFailureYou are creating a database using File - Database - Copy or File - New Database, but the file name or path name you entered contains invalid characters.Correct the file name or path and try again.
21MessageERR_PATHCHAR0x011BInvalid character in file namePKG_OSerror5
G@ResourceFailureYou tried to write to a file in a directory or subdirectory or on another drive to which you don't have write access, or to a drive that's full.
For example, you may be trying to change a file on a write-protected disk or write to a directory whose files have the read-only attribute set.Check your access and the available space, and try again.
21MessageERR_WRITETRUNC0x012ECannot write to file (possibly it is READ-ONLY or the disk is out of space or not ready)PKG_OSerror5
1You used CTRL-Break to stop the active process.Try the process again. If you were trying to access a server, it may be that activity on the server was high. You may want to wait until later to try again.
5MessageERR_CANCEL0x019DOperation stopped at your requestPKG_OSerror5
N@ResourceFailureThe server has reached the maximum number of threads (sessions) specified in CONFIG.SYS or its network file.
A database server thread is established for the users accessing the server and for each server task, such as mail routing and replication. The number of sessions for each thread is constrained by the OS/2 limit (53 in OS/2 1.2; 4,096 in OS/2 2.0) and by the number of sessions/threads configured. When the maximum thread count is reached for the database server thread, Notes creates additional threads to accommodate more users.
After installing the Notes program and data files, you'll need to supply a little more information about yourself and your machine. This process is known as Notes Setup.Start Notes. Setup questions automatically appear. You will only need to go through Notes Setup once. In the future, Notes will start automatically.ERR_SETUP_NOT_DONEPKG_OSerror1
@]@You must first run the workstation to setup your system.
Q@ResourceFailureYou're using Notes in Windows or PM, and Notes can't find the executable program library files it needs to run.Make sure that when you run the Notes Install program under DOS or OS/2, you choose the right files for your configuration. For more information , see the "Start Here" book.
Also:
With DOS, make sure the Notes directory is listed in the PATH statement in the AUTOEXEC.BAT file.
With OS/2, make sure the Notes directory is listed in the LIBPATH statement in the CONFIG.SYS file.
21MessageERR_LIBLOAD30x0147The executable program library cannot be found.PKG_OSerror5
S@ResourceFatalMessageERR_OS_REVENUE_PROT0x014CPKG_OSYour user ID file was created by using the same License as another user's ID file. Please re-create your ID file using a different License.error5
2MessageERR_BSAFE_ODSCERT_TOOBIG0x173ACannot convert Certificate to internal format, Certificate field is too largePKG_BSAFEerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
########################
1The file you specified is not an ID file or the ID file has been corrupted and is no longer an ID.
NOTE: Always keep a backup of your User ID file on floppy disk, particularly after each time you receive certificates allowing you access to additional Notes servers. Use Windows, PM, or the Macintosh Finder to replace the corrupted ID file with a copy of your backup ID file; or ask your Notes administrator for a new User ID. If you must get a new ID, you'll need to get new certificates as well. If you had any encryption keys from other Notes users and you still need them, ask those users to send them to you again.
1MessageERR_BSAFE_INVUSERIDFILE0x1754Your ID file has been corrupted, or is not an ID file.PKG_BSAFEerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
2MessageERR_AT_CANT_GET_ZONE_LIST0x1C30Error getting list of AppleTalk Zones.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
1MessageERR_AT_NO_ATALK_DLL0x1C31The AppleTalk library ATALK.DLL could not be loaded.PKG_NETDRVerror
2MessageERR_SECURE_PW_NOT_CONFIRMED0x1922The password and its confirmation value are not the samePKG_SECUREerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#########################################
1A user entered a command at the server console but they did not specify the correct number of parameters for the command.Re-enter the command with the proper number of parameters. Type HELP at the server or check the Server Administrator's guide for more information on server commands.
1The command you typed at the server console is incomplete or incorrect.Type the command again. Type HELP at the prompt or check the Notes Administrator's Guide for more information about valid server commands and arguments.
5MessageERR_TOO_MANY_ARGUMENTS0x09A4Too many arguments. Enter 'HELP' for the correct syntax.PKG_SERVERerror7
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##############
3MessageERR_SERVER_NOT_AUTH0x09AFYou are not authorized to perform this function on this serverPKG_SERVERerror7
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###########################################
4MessageERR_SERVER_NOT_CONFIG0x09B0This server is not configured for that functionPKG_SERVERerror7
5MessageERR_NEED_UPGRADE0x09BBThis server does not support the requested function. Please upgrade your server to the latest version of Notes.PKG_SERVERerror7
5MessageERR_MAIL_SEND_SUCCESS10x0E01Mail submitted for delivery. (1 Person/Group).PKG_MAILerror3
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
Message0x0E02ERR_MAIL_SEND_SUCCESSPKG_MAIL3errorMail submitted for delivery. (<Number of> People/Groups).1
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
4MessageERR_MAIL_TO_FIELD_VALUE0x0E03Invalid SendTo or CopyTo field value.PKG_MAILerror3
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##########
Message0x0E063
The document you tried to send doesn't have a SendTo field with the recipient name(s).Choose Mail - Forward to send the document.ERR_MAIL_NO_TO_FIELDPKG_MAILerror1
@]@No 'SendTo' field in document. Use 'Forward' on the 'Actions' menu instead.
Message0x0E04ERR_MAIL_NAME_NOT_FOUNDPKG_MAIL3error<Recipient Name> not found in any Name & Address Book. Choose OK to skip; Cancel to stop.1Notes can't find the name of your intended recipient in the Name & Address Books for your domain.
OK - Notes skips the name it can't find and sends the message to all other recipients. Select this option if you decide not to send the message to the person whose name you're not sure of, but still want to send it to everyone else.
Cancel - Notes doesn't send the message to any recipients. Select this message if you know the proper spelling of the name, but realize you typed it incorrectly. Correct the name and resend the document.
You can look for the recipient's name in your Name & Address books by choosing Mail - Address.
Tip You can also try entering variations on a name you're not sure how to spell; depending on whether the person is in your domain, Notes may be able to suggest valid names similar to what you enter.
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##########################
1Notes can't find the public Name & Address Book on your server, or your personal Name & Address Book (on your local hard drive or, for shared system users, in your personal directory).If you don't have a Name & Address Book icon on your workspace, add it using File - Open Database.
If you already have a public Name & Address Book on your workspace, see the Notes administrator. If it has been deleted accidentally, the administrator needs to make a new replica.
1MessageERR_MAIL_NO_ADDRFILES0x0E08No Name & Address Book database found.PKG_MAILerror3
1You can send mail to a user group containing the name of another user group, a feature called nesting. Notes allows six levels of nesting. The address in your active mail memo exceeded that level.To solve the immediate problem, specify the individual users to whom you want to send the mail, rather than the group names. As a long-term solution, ask your Notes administrator to consolidate your user group names in the Name & Address Book.
2MessageERR_MAIL_LISTLOOP0x0E0BPKG_MAILerror3
@]@Groups cannot be nested more than 20 levels deep when mailing.
Message0x0E0EERR_MAIL_NO_MAILFILE_ON_DESKTOPPKG_MAIL3errorYou must first add your mail file, <Server Name> <File Name>, to your workspace.1You chose a command from the Mail menu while your mail database icon was not on your workspace.
Note You also may see this message if you have a different server from your usual mail server selected in Location Setup and you choose a Mail command.
1. Choose Tools - Setup - Location and check your home server name.
2. Choose Tools - Setup - Mail and check your mail database file name.
3. Choose File - Open Database and add your mail file to your workspace.
If this doesn't work, see your Notes administrator. Remember that not all Notes users use Notes mail.
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####################################
4MessageERR_MAIL_NOTAMERICAN0x0E15This recipient does not have a North American license.PKG_MAILerror3
@]@This recipient's Notes certificate could not be found in the directory. Either no entry was found with a matching address (in your personal address book a matching forwarding address) or a matching entry was found which didn't contain a Notes certificate.
1 Notes can't find the public Name & Address Book on your server, or your personal Name & Address Book (on your local hard drive or, for shared system users, in your personal directory).If you don't have a Name & Address Book icon on your workspace, add it using File - Open Database.
If you already have a public Name & Address Book on your workspace, see the Notes administrator. If it has been deleted accidentally, the administrator needs to make a new replica.
1MessageERR_MAIL_NO_ADDRESS_BOOK0x0E26Unable to locate a Name & Address book.PKG_MAILerror3
1An alternative mail program could not handle the number of recipients in the message.If you need to use the alternative mail program, decrease the number of recipients.
Notes mail allows a larger number of recipients. If you have a Notes mail database, you can switch to Notes Mail in the Tools - Setup - Mail dialog box and try the operation again.
2MessageERR_OTHERMAIL_TOOMANYRECIPIENTS0x0E29There were too many recipients listed in the message.PKG_MAILerror3
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
####################
1An alternative mail program could not handle the complex documents you have selected.If you need to use the alternative mail program, decrease the number of documents or attachments.
Notes mail allows a larger number of documents and/or attachments. If you have a Notes mail database, you can switch to Notes Mail in the Tools - Setup - Mail dialog box and try the operation again.
2MessageERR_OTHERMAIL_TOOMANYITEMS0x0E2AThe number of documents and/or attachments in the selected messages exceeds the capacity of your mail system.PKG_MAILerror3
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
1Your alternate mail system could not complete a requested action.If you have a Notes mail database, you can switch to Notes Mail in the Tools - Setup - Mail dialog box and try the operation again.
2MessageERR_OTHERMAIL_ERROR0x0E2BYour mail system is unable to complete your requested action.PKG_MAILerror3
1MessageERR_NW_NEED_NEW_OS2_2x_SPX0x1C57Notes requires newer NetWare SPX.SYS and SPDAEMON.EXE files, v3.0b or later.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#############################
1Notes requires two available network sessions for some operations (for example, redesigning a database or communicating with two servers), but there aren't enough network sessions available.First, try restarting your computer. If you still see this message in Notes, do one of the following:
If you use Windows for Workgroups with any network
Enable LAN1 in the Ports dialog box.
If you use LAN Manager
Delete an existing network assignment, making it available for Notes to use.
To delete a network assignment created with NET USE, type:
NET USE X: /D
X is the resource you have assigned to the session; a resource, for example, may be a printer or disk drive.
If you see this message often, see your network administrator about changing your workstation's PROTOCOL.INI file to allow more sessions. If PROTOCOL.INI specifies you as a LIGHT-USER, change this to USER to increase the number of sessions available at one time.
If you use Novell
Your network administrator may need, if possible, to increase the number of NetBIOS sessions available on the network. Novell Advanced NetWare 2.15 SFT defaults to 10 NetBIOS sessions and Novell 386 defaults to 32 NetBIOS sessions (for version 3.0, the limit is 100; for version 3.1, the limit is 250).
To increase the number of sessions, create a SHELL.CFG file and add the following statement to it:
NETBIOS SESSIONS=X
Note You may also see this message if the network operating system is not fully compatible with Notes or NetBIOS, and Notes does not receive a valid reply when it queries the adapter.
If you use VINES
Run PCCONFIG from the Banyan Vines Directory containing the network card drivers.
At the main menu, choose Communications Settings.
In the Comm Settings menu, choose Set Maximum Number of Open Sockets and set
Default = 30.
Next, choose Set Maximum Number of Open SPP Connections and set Default = 50.
2MessageERR_NO_MORE_SESSIONS0x0A01Insufficient network or adapter resources. Consult Network documentation to increase the maximum number of sessions.PKG_NETWORKerror
1Notes is unable to create a network session to the particular server. Either the Notes server that is being contacted has been shut down or there is a network problem between the two servers.Restart the Notes server if it has been shut down. If not, check the network configuration, software, and hardware for problems.
2MessageERR_SESSION_CLOSED0x0A02Remote system no longer respondingPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####
1MessageERR_NAME_IN_USE0x0A03Another system is using the same server name as this systemPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
################################################
2MessageERR_NET_FLAKY0x0A04Network error due to transient network condition or hardware failurePKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#########################################
1Notes inquired about the network adapter status and got no response. Either there is no adapter or the adapter cannot pass the diagnostics.Contact the network administrator.
1MessageERR_NET_HARDWARE0x0A05Network adapter not installed or not functioningPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
############
1 There is a problem with the network operating system software.Contact your network administrator immediately.
2MessageERR_NET_SOFTWARE0x0A06Internal network software problem (or hardware malfunction)PKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
1An attempt was made to contact a server and no response was received in a reasonable amount of time. The server is probably busy handling other requests and was unable to respond quickly.Check the server load by doing a SHOW TASKS command on the console. Wait for the load to decrease or spread the load by having users access a different server.
2MessageERR_TIMEOUT0x0A07Network operation did not complete in a reasonable amount of time; please retryPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
5MessageERR_NET_CMD_CANCELLED0x0A08Network operation was cancelledPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
######
1The Notes server tried to establish a session with another server via a wide area network (WAN) or remote connection. The other server's modem may not have responded, or the server is down for maintenance or due to technical problems.Try to connect again later.
4MessageERR_NOT_RESPONDING0x0A0ARemote system not respondingPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
######
2MessageERR_NAME_IN_USE_HERE0x0A0BNetwork name already in use on this systemPKG_NETWORKerror
2MessageERR_BFR_TOO_SMALL0x0A0E(Network error: buffer was too small)PKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
1The NetBIOS protocol driver did not respond correctly to an adapter status query by Notes.Contact the network administrator.
1MessageERR_NO_NETBIOS0x0A0FNETBIOS not loaded or not runningPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###############
5MessageERR_DISCONNECTED0x0A11Disconnected from ServerPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##################
5MessageERR_HANGUP0x0A12Phone hung up locallyPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###########################
4MessageERR_WRONG_STATE0x0A14Port not ready or carrier not establishedPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
1The remote server's modem is busy. It could also be that, when the Remote Connection document was created to set up calling to the remote server, the phone number your modem is dialing from was mistakenly typed into the field where the number you want to dial out to should go (which will always return a busy message).If you receive this message repeatedly and the Remote Connection document is correct, you may need to talk to the remote server administrator about adding more lines and modems to the system.
5MessageERR_REMOTE_BUSY0x0A15Remote phone was busyPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
########################
5MessageERR_NO_ANSWER0x0A16Remote phone did not answerPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##################
1You will see this message if the remote modem is shut off or damaged. The local modem should make several tries before giving up. The number of seconds it will ring is adjustable via S-Register 7. Turning Volume on (in the Additional Setup dialog box) allows you to hear the Ring signal locally.
You should also see this message if the remote server is not running, even though the modem may be powered up.Determine if one of the above is the problem and try again.
3MessageERR_NO_CARRIER0x0A17Remote phone did not answer or modem could not detect carrierPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#############################
2MessageERR_NO_DIALTONE0x0A18Modem could not detect dial tonePKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###########
1MessageERR_BADPORT_ARGS0x0A19Invalid port initialization argument listPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
2MessageERR_MODEM_RESPONSE0x0A1AReceived unrecognizable response from modemPKG_NETWORKerror
1MessageERR_MODEM_NORESP0x0A1BModem does not respondPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
####################
1This message means that everything worked fine up to the point where the modems attempted "handshaking" and negotiating for a common communications protocol, and then reached an impasse. Two modems which are fundamentally incompatible will cause this message to appear in the Log and in a message box on the workstation end. A syntax error in the command file response codes, or too long an Auto Dial suffix can also produce this problem.
Most often, however, it is caused by incorrectly worded CONNECT responses in the command file.Determine which of the above is the problem, correct it, and try again.
2MessageERR_HANDSHAKE0x0A1CCould not establish dialog with remote systemPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###################################
3MessageERR_SESS_NOT_READY0x0A1DSession is not yet openedPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###############
5MessageERR_DEVICE_IN_USE0x0A1FDevice or unit number already in usePKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####
5MessageERR_DRIVER_IN_USE0x0A20Driver already in usePKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
####################
2MessageERR_NO_RING_BUFFER0x0A21Driver could not allocate memory for communications buffersPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#############################################
2MessageERR_NO_BUFFERS0x0A22Unable to allocate network buffer(s)PKG_NETWORKerror
3MessageERR_1200_DIAL_ERROR0x0A4ACould not detect carrier or dialtone; or phone was busy or did not answerPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##############################
Message0x0A4BERR_MODEM_BADCMDPKG_NETWORK1errorModem reported command error. Check: (1) That the command file selected is correct; (2) If editing a command file, that all commands conform to modem vendor documentation of supported AT commands.Ordinarily this message means your modem couldn't interpret something in your command file and it reported to Notes that it could not continue.The most common reason for this is the selection of the wrong command file for your modem. Occasionally, however, this message will appear for no apparent reason (random static, perhaps, or switching an initialized server modem for one which hasn't yet been initialized), even when your configuration previously worked. It is recommended you try two or three times before looking into your command file for a solution to the problem.
Another possible reason for this message is that you have edited your command file and made a mistake, perhaps using a command that works for another type of modem, but not for your current one.
You may encounter this problem on the server end during replication; the console will display the following: "Unable to replicate with server <server name>: received unrecognizable response from modem." Again, try two or three times before assuming the command file is at fault.
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##################
2MessageERR_STRING_RESOURCE0x0A4CString resource not providedPKG_NETWORKerror
2MessageERR_INSUFF_OS_RES0x0A56Insufficient operating system resourcesPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
2MessageERR_INSUFF_CMDS0x0A57Network adapter cannot issue any more commands. Consult your Network documentation to increase the number of commands.PKG_NETWORKerror
@]@MessageThis database is currently being used by someone else. In order to share a Notes database, all users must use a Notes Server instead of a File Server.0x020D
1In Windows or PM, you chose File - New Database or File - New Replica to create a database on a Notes server, but tried to create the database outside of the server's Notes data directory. The new database can only be created in the data directory or in a subdirectory of the data directory (you can create your own new subdirectory while creating the database).
Note You don't see this message on the Macintosh because you can't enter either a DOS drive specifier, which contains a colon (:), or a backslash (\) in a new database name.Change the pathname to be relative to the server's data directory.
For example, if a server's data directory is:
C:\DATA
and you tried to create a database with this path:
D:\YOURNAME\SALES.NSF
Notes would display this message. Instead, enter this:
YOURNAME\SALES.NSF
and Notes stores the new database in:
C:\DATA\YOURNAME\SALES.NSF
2MessageERR_INVALID_NAME0x022FRemote pathname must be relative to Data DirectoryPKG_NSFerror
Notes is unable to open the source database in order to copy data from it.Make sure that the server containing the database is running and that you have access to the database.ERR_SOURCE_DB_CLOSEDPKG_NSFerror1
1The document has been corrupted. The most common causes for database corruption are:
1) Improper shutdown of the operating system due to system reboot, system crash, power failure, or failure to use proper shutdown procedures (i.e., under OS/2, the shutdown command in the desktop manager); or
2) Improper database access by an API program. Copy a valid copy of the document from a replica or backup copy of the database.
2MessageERR_INVALID_ITEMLEN0x0243PKG_NSFerror
@]@Failed search on LDAP Server <Server Name> Reason: <Error Message>
1 The document has been corrupted. The most common causes for database corruption are:
1) Improper shutdown of the operating system due to system reboot, system crash, power failure, or failure to use proper shutdown procedures (i.e., under OS/2, the shutdown command in the desktop manager); or
2) Improper database access by an API program.Copy a valid copy of the document from a replica or backup copy of the database.
2MessageERR_INVALID_ITEMTYPE0x0244Document is damaged or obsolete (unrecognized data type)PKG_NSFerror
1You tried to browse a server or access a directory for which you don't have the required access privileges.Ask your Notes administrator for access privileges.
3MessageERR_NOACCESS0x0246PKG_NSFerror
@]@Insufficient memory - NAMELookup data hash pool is full.
1You tried to open a database but you don't have the privileges needed to do so.Ask your Notes administrator or the database manager about getting those privileges.
3MessageERR_OPEN_FILE0x024BPKG_NSFerror
@]@Failed search on LDAP Server <Server Name> Reason: <Error String>, DN: <Distinguished Name>, Attribute: <Value String>
1You tried to delete or copy over this database but you don't have the privileges needed to do so.Ask your Notes administrator or the database manager about getting those privileges.
3MessageERR_DEL_FILE0x024CPKG_NSFerror
@]@Failed search on LDAP Server <Server Name>, DN: <Distinguished Name>, Attribute <String Value> has invalid syntax: <Search String>
1Notes detected an internal inconsistency, which may indicate damage, in a file.The author of the damaged document should delete the document and re-create it. Replicas of the document may also be damaged and should also be checked.
2MessageERR_OBJECT_TRUNCATED0x024FPKG_NSFerror
@]@Directory Assistance could not find an alternate replica for domain <Domain Name>
1A directory exists with the same name as one given for a database.Choose another name for the database that does not match an existing directory name.
5MessageERR_EXISTS_DIR0x0254PKG_NSFerror
@]@Warning: unable to use optimized view rebuild for <View Name> due to insufficient disk space at <Directory>. Estimate may need <Amount> million bytes for this view. Using standard rebuild instead.
1The server's administrator has restricted who can create new databases on the server. Only people listed in the "Can create new databases" field of the Server document in the Name & Address Book are allowed this access.Ask the server's administrator if you can be added to the access list.
3MessageERR_CREATE_FILE0x0256PKG_NSFerror
@]@Unable to access view rebuild directory <Directory>. Using default temp directory instead.
1The server's administrator has restricted who can create replica databases on the server. Only people listed in the "Can create replica databases" field of the Server document in the Name & Address Book are allowed this access.Ask the server's administrator if you can be added to the access list.
3MessageERR_CREATE_REP_FILE0x0257PKG_NSFerror
@]@Unable to wait for rebuild because collection sem is locked.
1A signed document has either been changed since it was signed or has somehow been corrupted.Check with the author of the document to get the original.
2MessageERR_NOTE_INVSIG20x025BDocument has been modified or corrupted since signed! (data)PKG_NSFerror
1Notes cannot verify the signature on a "signed" mail document.If you need to verify the signature, do one of the following:
* You and the sender have no certificates in common. Try to get at least one certificate in common with the sender.
* You and the sender have at least one certificate in common but you turned off the Trust other certificates signed by the certifier option. Turn on the option and try again.
4MessageERR_NOTE_INVSIG30x025CYou and signer have no Certificates in common; signer cannot be assumed to be trustworthy.PKG_NSFerror
1The length of a string of text to be searched for in a database is longer than the maximum length allowed (i.e., 256 characters in Notes Version 3.0).Shorten the search string.
4MessageERR_STS_STRINGTOOLONG0x0269Text search string is too longPKG_NSFerror
1An operation was attempted that requires the user to have all privileges (roles) and the user did not have them.Determine who attempted the operation and give him or her all privileges if appropriate.
2MessageERR_MISSING_PRIVS0x0272All privileges are required for this operationPKG_NSFerror
1 The document has been corrupted. The most common causes for database corruption are:
1) Improper shutdown of the operating system due to system reboot, system crash, power failure, or failure to use proper shutdown procedures (i.e., under OS/2, the shutdown command in the desktop manager); or
2) Improper database access by an API program.Copy a valid copy of the document from a replica or backup copy of the database.
2MessageERR_INVALID_ITEMUNK0x0273PKG_NSFerror
@]@Document is damaged or obsolete <unrecognized field>
Message0x0274ERR_FIXUP_DOCPKG_NSFerrorDocument NT<Document Number> in database <Database Name> is damaged: <Error Message>1The indicated document was somehow corrupted. The most common causes for database corruption are:
1) Improper shutdown of the operating system due to system reboot, system crash, power failure, or failure to use proper shutdown procedures (i.e., under OS/2, the shutdown command in the desktop manager); or
Message0x0275ERR_FIXUP_DOC_DELETEDPKG_NSFerrorDocument NT<Document Number> in database <Database Name> has been deleted1The indicated document was somehow corrupted and the FIXUP program has purged it from the database. The most common causes for database corruption are:
1) Improper shutdown of the operating system due to system reboot, system crash, power failure, or failure to use proper shutdown procedures (i.e., under OS/2, the shutdown command in the desktop manager); or
Message0x027AERR_FIXUP_DOC_ITEMPKG_NSFerrorDocument NT<Document Number> in database <Database Name> is damaged: <Error Message> (Field <Field Name>, Datatype <Data Type>)1The indicated document was somehow corrupted. The most common causes for database corruption are:
1) Improper shutdown of the operating system due to system reboot, system crash, power failure, or failure to use proper shutdown procedures (i.e., under OS/2, the shutdown command in the desktop manager); or
1Your DESKTOP.DSK file, which contains the list of database icons in your workspace, has become corrupted. You may see this message when you attempt to open a database on your workspace. You won't be able to remove the selected icon from your desktop until you replace your DESKTOP.DSK file. If you have a backup copy of your DESKTOP.DSK file, use your operating system to replace the file; otherwise, you must rebuild the file from scratch. See the message document on "Notes Version 1 workspace file (DESKTOP.DSK) has grown larger than 1MB... "
5MessageERR_OBJ_GONE0x0281Database object has been deletedPKG_NSFerror
Message0x0284ERR_FIXUP_BUCKET_REPAIREDPKG_NSFerrorPartially-saved document in database <Database Name> has been deleted1Notes detected a document that was not properly saved and deleted it from the database indicated.
You're using a database (.NSF file) created in an earlier release of Notes and have exceeded that version's limit. Notes Release 3 supports databases up to 1 gigabyte in size.Upgrade your database as follows:
1. Close the database.
2. If the database is on a server, exit the server.
If it's a local database (stored on your workstation's hard disk), continue with step 3.
3. Highlight the database icon and choose File - New Replica to make a new copy of that database. In the New Replica dialog box, enter a different name for the copy (for example, if you're copying NAMES.NSF, call it NAMES2.NSF).
Be sure to leave the Replicate Access Control List option selected.
4. After Notes creates the copy, delete the original database.
5. Rename the copy at the DOS or OS/2 command prompt (or use the File Manager):
C:\> RENAME NAMES2.NSF NAMES.NSF
6. If the database is stored on a server, restart the server.
Keep in mind:
* For very large databases, Notes may need several hours to create the copy, so you may want to do this procedure overnight.
* You can check any database's size by choosing File - Database - Information.
* You can check the size of all of the server's databases at once by looking in the Database Sizes view of the Notes Log database (LOG.NSF) on each server.ERR_FILEMAXPKG_NSFerror1
@]@Database (.nsf) has grown too large; use File New Replica to recreate your file with larger capacity.
You're using a database (.NSF file) created in Notes Release 1 and have exceeded the 40MB limit. Notes Release 3 supports databases up to 1 gigabyte in size.Upgrade your database as follows:
1. Close the database.
2. If the database is on a server, exit the server.
If it's a local database (stored on your workstation's hard disk), continue with step 3.
3. Highlight the database icon and choose File - New Replica to make a new copy of that database. In the New Replica dialog box, enter a different name for the copy (for example, if you're copying NAMES.NSF, call it NAMES2.NSF).
Be sure to leave the Replicate Access Control List option selected.
4. After Notes creates the copy, delete the original database.
5. Rename the copy at the DOS or OS/2 command prompt (or use the Windows File Manager):
C:\> RENAME NAMES2.NSF NAMES.NSF
6. If the database is stored on a server, restart the server.
Keep in mind:
* For very large databases, Notes may need several hours to create the copy, so you may want to do this procedure overnight.
* You can check any database's size by choosing File - Database - Information.
* You can check the size of all of the server's databases at once by looking in the Database Sizes view of the Notes Log database (LOG.NSF) on each server.ERR_FILEMAXV1PKG_NSFerror1
@]@Notes Version 1 database (.nsf) has grown larger than 40MB; use File Replication New Replica to recreate your file as a Notes Version 4 database (.nsf) capable of 4GB.
Message0x02BAERR_FIXUP_UNID_CHANGEDPKG_NSFerrorDocument NT<Document Number> in database <Database Name> has been assigned a new UNID1The indicated document had a bad or duplicate ID field and has been assigned a new unique one.
1The database has somehow become corrupted. An attempt was made to correct the problem but it failed. The most common causes for database corruption are:
1) Improper shutdown of the operating system due to system reboot, system crash, power failure, or failure to use proper shutdown procedures (i.e., under OS/2, the shutdown command in the desktop manager); or
2) Improper database access by an API program.Try copying the database using the File - New Replica command from the Notes workstation. If this does not work, restore the database from a backup copy.
2MessageERR_NSF_CORRUPT_UNIDIDX0x02BCDatabase is damaged and can't be repaired (UNID index)PKG_NSFerror
Message0x02BDERR_FIXUP_REBUILD_UNIDPKG_NSFerrorRebuild UNID index in database <Database Name>1Notes detected a problem with an index in the specified database and will automatically rebuild the index.
2MessageERR_XPC_NSE_ERROR0x1438Error in Acquire or Connect Script; check the log file, Miscellaneous Events view, for further information.PKG_XPCerror1
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###########
2MessageERR_XPC_SPEED_TOO_HIGH0x1439The selected modem command file only allows speeds as high asPKG_XPCerror1
11) The server that the database is on crashed or was rebooted while Notes was running.
2) An API program is improperly accessing the database.The database should be fixed-up automatically the next time it is opened. You can also LOAD FIXUP from the Notes server console. When rebooting or powering off an OS/2 machine, always use the shutdown option from the desktop manager to ensure proper handling of files.
For more information about the Database Fixup program, see the Notes Administrator's Guide.
1MessageERR_NSF_CORRUPT0x0238PKG_NSFerror
@]@Informational, rebuilding view - previous rebuild did not complete (reading <'Collection'> <'Class name'> note Title:<'View Title'>)
51MessageERR_MM_MISMATCH0x019ESomeone else is running a different version of Notes right now. You cannot run 2 different versions at the same time on the same machine.PKG_OSerror5
The maximum number of memory handles allowed by the operating system has been reached.Decrease the amount of load on the server. Under OS/2 while the Notes server is running, open an OS/2 command prompt window and enter the command "notes server -m >file.out" and send the resultant file (file.out) to Lotus technical support.
11MessageERR_MEM_HANDLES0x01A2Maximum number of memory segments that Notes can support has been exceededPKG_OSerror5
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
########################################
Message0x01A55
You're using Windows or PM, and Notes can't find your NOTES.INI file.
NOTES.INI is a customizable settings file that contains information about your use of Notes. In order for Notes to run, the NOTES.INI file must be in the search path. This message doe
* Under DOS, make sure the PATH statement in the AUTOEXEC.BAT file contains the directory that contains NOTES.INI (either your Windows directory or your Notes data directory).
* Under OS/2, make sure the LIBPATH statement in the CONFIG.SYS file includeERR_NO_NOTESINIPKG_OSerror1
21MessageERR_STATIC_STORAGE0x01B0Too many processes. Exceeded maximum limit on static storage.PKG_OSerror5
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#########
21MessageERR_CANNOT_ACCESS_SHMEM0x01B1Cannot attach to shared memory region, due to insufficient access (probably owned by another user or group)PKG_OSerror5
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
######################
21MessageERR_MAXDPOOLS_EXCEEDED0x01B2Exceeded maximum limit of 300MB of shared memoryPKG_OSerror5
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##################
21MessageERR_PTERM0x01BAToo many PROCESS termination handlersPKG_OSerror5
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##########################################
21MessageERR_TTERM0x01BBToo many THREAD termination handlersPKG_OSerror5
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###########################################
21MessageERR_OS_LAUNCHFAILMEM0x01BCThere is not enough memory available to launch the application. To make more memory available, try quitting other open applications.PKG_OSerror5
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
41MessageERR_BUSY0x01BDDevice is Busy/In UsePKG_OSerror5
@]@The Notes Data Directory is in use by another Notes program (possibly on another computer). You must first shut down all Notes programs (for example, the Adminstration program) that share this Data Directory.
21MessageERR_POOLREALLOCFIXED0x043EInsufficient contiguous memory to reallocate in-place (P)PKG_MISCerror6
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
41MessageERR_TOO_MANY_POOLS0x0441The index is too big. Change view to select fewer documents; or reduce number/size of columns in the view.PKG_MISCerror6
31MessageERR_NW_INIT_FAIL_DOS_MEMORY0x1C4DNetWare IPX/SPX could not be initialized: Insufficient conventional memory. Try loading fewer DOS device drivers or TSRs.PKG_NETDRVerror
31MessageERR_NO_WIN_SPXECB_SERVER0x1C55The Notes Server for Windows does not support the use of NetWare's IPX/SPX protocol. Instead, you should load Novell's NETBIOS and configure this LAN port to use it.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####################
31MessageERR_NW_NO_MORE_IPXSPX_SOCKETS0x1C58Insufficient IPX sockets are available. Consult NetWare documentation to increase the maximum number of sockets.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####
31MessageERR_NW_NO_MORE_SPX_SESSIONS0x1C59Insufficient SPX sessions are available. Consult NetWare documentation to increase the maximum number of sessions.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####
31MessageERR_NW_SAP_UNKNOWN0x1C5AUnexpected SAP error. See the Notes log file on this system for error code.PKG_NETDRVerror
31MessageERR_TCP_NO_LWP_DLL0x1C67The Novell LAN Workplace library RCB43.DLL could not be loaded.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
31MessageERR_TCP_MEMORY0x1C68The TCP/IP protocol stack reported that it ran out of memory. Consult your network documentation to increase configured memory, or reduce Notes connections by limiting clients (see SERVER_MAXSESSIONS parameter in Notes Admin Guide).PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
############################
31MessageERR_TCP_NO_MORE_SOCKETS0x1C69Insufficient TCP sockets are available. Consult your vendor's TCP/IP documentation to increase the maximum number of sockets.PKG_NETDRVerror
31MessageERR_TCP_DMN_CANT_LOAD0x1C6BThe Notes Winsock Daemon _WSKDMN.EXE could not be loaded.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####
31MessageERR_TCP_DMN_NO_WSKAPI_DLL0x1C6CThe Notes _WSKAPI.DLL could not be loaded.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
################
31MessageERR_TCP_BAD_LWP_DLL0x1C6DThe Novell LAN Workplace RCB43.DLL's SELECT function may not meet specifications. Please call Lotus Support.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
####################
31MessageERR_NO_WINSOCK_SERVER0x1C6EThe Notes Server for Windows does not support the use of the TCP/IP protocol. Please reconfigure, using another protocol for this server.PKG_NETDRVerror
31MessageERR_TCP_NO_VENDOR_DLL0x1C6FThe TCP/IP vendor's interface library could not be loaded.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
Message0x1C701
ERR_TCP_NTI_BADNAMEPKG_NETDRVerror1
@]@The TCP/IP NTI transport driver could not be loaded. Verify that the TCP protocol is installed on the system and that the system PATH environment variable is correct.
31MessageERR_NW_FUNCTION_MISSING0x1C82A NetWare library could not be loaded because a function is missing from the DLL.PKG_NETDRVerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###########################################
31MessageERR_NW_NO_MORE_SPX_ENDPOINTS0x1C83Insufficient IPX sockets, SPX sessions, or TLI endpoints are available. Consult NetWare documentation to increase these resources.PKG_NETDRVerror
It is likely you have closed a database yet still have a connection with the server on which it is located. Attempting to open another database on another server without first hanging up and dialing the new server will produce this message.
This message Determine which of the above is the problem, then try again.
31MessageERR_WRONG_SERVER0x0A10Specified port(s) currently in usePKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#############
41MessageERR_DUPL_PORTNAME0x0A28A port with that name already existsPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####################################
41MessageERR_INSUFF_ADAP_RES0x0A2CInsufficient network or adapter resources. Consult Network documentation to increase those resources.PKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##################################
41MessageERR_LANMAN_PROC_LIMIT0x0A3CThe LANMAN process limit has been exceeded. This cannot be increased. Reduce usage by limiting clients (see SERVER_MAXSESSIONS parameter in Notes Admin Guide).PKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
######################################
31MessageERR_INACTIVE_PORT0x0A67Request failed because the requested port is inactivePKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
31MessageERR_SERVER_ONLY0x0A79This function is only available when used on a Notes ServerPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
21MessageERR_ANQ_SIZE0x0A87Asynchronous notification message too largePKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###################
21MessageERR_NET_GROUP_POOLFULL0x0A89Insufficient memory - Group Cache Pool is full.PKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####
21MessageERR_NET_SCHEDULE_POOLFULL0x0A8AInsufficient memory - Scheduling Database Pool is full.PKG_NETWORKerror
An internal network message queue has reached its capacity and will not accept any new messages until some are removed. Either the system is overloaded and the messages cannot be handled quickly enough or the process responsible for removing the messageCheck the server log for error messages indicating a process has failed. If so, restart that process or the entire server if necessary. If not, check the server for excessive load and decrease it by having some users access a different server.
31MessageERR_EXCEED_QUOTA0x0AE4Queue is fullPKG_NETWORKerror
@]@11
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##########################################
Message0x0201
If the file is a Notes database then the file has been corrupted. The most common causes for database corruption are:
1) Improper shutdown of the operating system due to system reboot, system crash, power failure, or failure to use proper shutdown proceRestore the file from backup.ERR_SORT_DATATYPEPKG_NIFerror1
The file has somehow become corrupted. The most common causes for database corruption are:
1) Improper shutdown of the operating system due to system reboot, system crash, power failure, or failure to use proper shutdown procedures (i.e., under OS/2, thRestore the file from a backup copy.ERR_UNSUPPORTED_FLAGSPKG_NIFerror1
@]@The program cannot interpret this file due to an invalid structure
The document has been corrupted. The most common causes for database corruption are:
1) Improper shutdown of the operating system due to system reboot, system crash, power failure, or failure to use proper shutdown procedures (i.e., under OS/2, the shutdCopy a valid copy of the document from a replica or backup copy of the database.ERR_LOOKUP_ERRORPKG_NIFerror1
Either the database being accessed was created by a dramatically different version of Notes or it has been corrupted.Use the correct version of Notes for the database. If it has been corrupted, you must restore it from a replica or backup copy.
@]@Notes can't automatically display Help on this subject, but you can open the Notes Help database and search its Index. For Help on server administration, add and open the Domino Administrator Help database.
@]@The Replication Cutoff Date indicates that documents before <Date> should be purged from the database <Database Name>. Would you like it to be done now?
31MessageERR_NSF_UNKTBL2BIG0x0287Cannot store document; database has too many unique field names. Please ask your administrator to compact the database.PKG_NSFerror
31MessageERR_DESKMAXV10x0289Notes Version 1 workspace file (DESKTOP.DSK) has grown larger than 1MB; you can delete DESKTOP.DSK if you wish a new one to be created that is capable of 50MB of private views.PKG_NSFerror
An attempt was made to allocate memory from a memory pool but the pool has reached its maximum size set by the variable NSF_BUFFER_POOL_SIZE in the NOTES.INI file.Increase the value of the variable NSF_BUFFER_POOL_SIZE in the NOTES.INI file. For more information, see the Notes Administrator's Guide.
11MessageERR_NO_BUFFER0x028FThere is not enough memory for a view or database buffer. Please close any unneeded windows. You may also increase Notes' available memory by quitting and choosing 'Get Info...' from the Finder.PKG_NSFerror
The value of the environment variable NSF_BUFFER_POOL_SIZE is too small.Increase the value of NSF_BUFFER_POOL_SIZE in NOTES.INI. The default values are 51200 for Macintosh and 2048000 for Windows and OS/2.
Caution: Do not set this value to a number larger than available physical memory. Overall performance will deteriorate
21MessageERR_BUFPOOL_TOO_SMALL0x02AEInsufficient memory for a view or database buffer. Please close any unneeded windows. You may also increase Notes' available memory by quitting and choosing 'Get Info...' from the Finder.PKG_NSFerror
31MessageERR_UPDATE_ATT0x02C8One or more of the source document's attachment are missing. Run Fixup to delete the document in the source database.PKG_NSFerror
21MessageERR_NSF_BUF_POOLFULL0x02F3Insufficient memory - NSF buffer pool is full. Increase the value of the NSF_BUFFER_POOL_SIZE environment variable.PKG_NSFerror
41MessageERR_COMPACT_INTERRUPTED0x038CCompaction of the database was stopped prematurely because another user modified it while it was being compacted.PKG_NSF2error
31MessageERR_REPLICADB_POOLFULL0x1603Replicator unable to build list of local databases - insufficient memory in pool.PKG_REPLerror4
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###############################################
21MessageERR_CACHE_CORRUPTED0x1607Replication history is corrupted. Use File Database Copy (Replica) to clear the history.PKG_REPLerror4
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###########################
The database that is being replicated has a document, view, or form that has an access role assigned to it and the destination server has not been given all access roles in the source database's ACL.If it's appropriate that the destination server receive those documents, modify the ACL in the source database to give the destination server enough access to replicate all documents.
21MessageLOG_REPL_TIMEOUT0x1623Replication cancelled due to timeoutPKG_REPLerror4
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
####################
MessageReplicator deleted duplicate document in <Database Name> (Note Class <Note Class>)0x162A4
LOG_REPL_DEL_DUPL_DBGPKG_REPLerror
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#######
MessageReplicator noticed duplicate document in <Database Name> (Note Class <Note Class>)0x162C4
LOG_REPL_DUPL_DBGPKG_REPLerror
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###########
41MessageERR_REPL_HIDE_IRREVERSIBLE0x1635A hidden design will apply to this database and all of its replicas. Once this option has been set it can never be changed. Are you sure you want to continue?PKG_REPLerror4
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##############################
MessageUnable to replace access control list in <Database Name>0x163C4
LOG_REPL_DEL_ERRPKG_REPLerror
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
######################################
MessageERR_REPL_UNIFORM_ACL0x169APKG_REPLerror4
@]@Replication cannot proceed because cannot maintain uniform access control list on replicas
31MessageERR_SECURE_SERVER_EXPIRED_CERT0x1933The server's certificate has expiredPKG_SECUREerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##########
31MessageERR_SECURE_NO_SERVER_CROSS_CERT0x1934The server's Address Book does not contain any cross certificates capable of authenticating you.PKG_SECUREerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#############
31MessageERR_SECURE_NO_CLIENT_CROSS_CERT0x1935Your Address Book does not contain any cross certificates capable of authenticating the server.PKG_SECUREerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##############
31MessageERR_SECURE_SERVER_ID_CORRUPT0x1936The server's ID file has been corrupted, or is not an ID file.PKG_SECUREerror2
41MessageERR_SECURE_NEWNAME_REFUSED0x1982The remote client refused the name updatePKG_SECUREerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#########
41MessageERR_SECURE_WRONG_CHALLENGE0x1983The remote system failed to prove its identityPKG_SECUREerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
41MessageERR_SECURE_UNKNOWN_PROXY_FCT0x1984Internal error: request to make an unknown Proxy Database entryPKG_SECUREerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#################################################
41MessageERR_SECURE_MISSING_ARG0x1985Internal error: a required parameter in a subroutine call has not been suppliedPKG_SECUREerror2
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#######################################
XV} b
41Message0x1986The new name in the supplied Change Request does not match the subject name in the supplied certificatePKG_SECUREerror2ERR_SECURE_CHANGE_WRONG_NEW_NAMEPKG_SECURE
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###################################
51MessageERR_FT_TOO_BUSY0x091DThe server's full text indexer is too busy right now to accept this requestPKG_SERVERerror7
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
There is a port configured for this server but it is not included in the Server record for this server in the Name & Address book.Add the required information for this port in the Server record for this server in the Name & Address book. If the port does not exist on this server, de-configure it.
MessageERR_CHRONOS_ARGUMENTS0x3379Periodic full text indexer not started - need to specify HOURLY, DAILY, WEEKLY program argumentPKG_ADDINerrorChronos7
MessageRouter: Transferred <Message Count> messages to <Server Name>Router0x3383
ERR_ROUTER_TRANSFERED_NUMBERPKG_ROUTERMSGerror3
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##########
MessageRouter: No messages transferred to <Server Name>Router0x3384
ERR_ROUTER_NONE_TRANSFEREDPKG_ROUTERMSGerror3
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#########################
1MessageERR_ROUTER_TOOMANYADJDOMAINS0x1125Router: Too many Adjacent Domainserror3
@]@PKG_ROUTER
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#######
MessageRouter: Unable to create object store <Database Name>Router0x3389
ERR_ROUTER_OBJSTORE_CREATEPKG_ROUTERMSGerror3
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
####################
MessageERR_ROUTER_NOT_OBJSTORE0x338AFile is not an object store. Rename it so that the router can create an object store with that namePKG_ROUTERMSGerrorRouter3
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#################
Message0x3306
error
Updating views in <Database Name>IndexerERR_UPDATE_FILEPKG_UPDATE9
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####
(@StatisticDomino.BuildNameTextBuild name for this Domino ServerVariesNo<
41MessageERR_NSF_NO_WEB_CACHE0x03D3The Web retriever database cache could not be opened. Please check your InterNotes Server value in your current location.PKG_NSF2error
41MessageERR_RTR_NOSUCHSERVER0x16A2Server not foundPKG_REPLerror4
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
41MessageERR_RTR_NO_SELECTIVE_REP0x16ABReplication not supported to database with selective replication enabled. If you wish, you may use File Database Properties Replication Settings... to delete the selective replication information.PKG_REPLerror4
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
##########
41MessageLOG_REPL_FILE_ERR20x16ACPKG_REPLerror4
@]@Unable to replicate from <Source Path Name> to <Destination Path Name>
41MessageSTS_RTR_CONFIG0x16ADChecking for database configuration changes in Cluster Database DirectoryPKG_REPLerror4
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
###############
41MessageSTS_RTR_REPL0x16AEChecking for modified databases requiring replicationPKG_REPLerror4
CN=Gilles Carrier/O=IrisCN=Damien Katz/O=Iris
#####################################
41MessageERR_CLREPL_BADREPID0x16B1Invalid replica ID for cluster database directory. If cluster name changed, delete cluster database directory and restart cldbdir task.PKG_REPLerror4
Need a newer version of Notes to execute this button.
0S0E
Details...
2S3S4S6S8S
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
EdoGX
$Info
$Script
$$Script_O
$$ScriptName
$Body
GIF89a
B!h=?2R\!rYZ
beV{=JLgOu5
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
$ImagesWide
$ImagesHigh
$ImagesColorize
$ImageData
$ImageNames
Statistics & Events
TopContent Frame
OutlineContent Frame
Outline?
Content Frame?
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
$TITLE
$WindowTitle
$Comment
$FrameSet
Categori_zeK
_Edit Document
Send Docu_ment
_Forward
_Move To Folder...
_Remove From FolderK
Categori_zeK
_Edit Document
Send Docu_ment
_Forward
_Move To Folder...
_Remove From FolderK
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
$Author
$TITLE
$Index
$Formula
$FormulaClass
$ViewFormat
$Comment
$WebFlags
$V5ACTIONS
$ACTIONS
Event Notification (created:
1S2S4S6S8S9S
(Help)
events5_f_event
0S0E
"Small Fonts
Lotus Product
Event
Field that needed by the server tasks: ServerName, Type, Severity, EventTextMatch, MonitorMethod, ScheduledPeriod, Router, Destination, Program, CMDLine, Source
This field returns the available serverities, sorted by their number
OK to translate
0R1S
Fatal|1
Failure|2
Warning (high)|3
Warning (low)|4
Normal|5
0R1S2S3S4S5S6S7S8S
EventSeverities
.,$///:
This field returns the tasks various types available, sorted by their number
If a task is type zero, then it is first, type 4, then fourth
this field is used to determine how the wizard is launched, and what wizard panels are relevant.
if the StartCode is "custom", then the field must have a 2 more values, which is the MonitorNumber for the custom event that you will be notified about and if the it is a "p" for probe or "m" for monitor.
wizevent.gif
StartCode
notify
1S2S
Event Notification Setup Wizard
Event notifications are used notify someone or record that an event has occurred.
This wizard will guide you step by step through the process of creating an Event Notification.
Click the next button to continue.
start
start
Event Notification Wizard
This wizard is used to set up the notification for the current probe or monitor.
Click the next button to continue.
custstart
custstart
Choose Notification Trigger
What should trigger the notification?
SelectNotifTrig
Any event that matches my criteria. | cA specific built-in/add-in task event. | dA specific monitor or probe event|mp
SelectNotifTrig
$TriggerInfo
TriggerInfo
TriggerInfo
This option will notify of any event that matches certain criteria.
This option will notifiy of an event that are already defined and can be generated by the server or add-in tasks.
This option will notifiy of an event that is generated by a probe or monitor. You may choose an existing monitor or probe event or create a new one.
Servers to Monitor
You can allow the notification to be triggered by any server in your domain, or only selected servers.
" Also the file might not have been found due to an error attemping to connect to the server. Check that you have the proper connection documents to connect to the server."
Const PROBLEM_SERVER_NOT_IN_DOMAIN = |The following servers do not appear to be in the current domain: |
Const RESOLUTION_SERVER_NOT_IN_DOMAIN = |Edit the document and make sure all servers are in the current domain.|
Const PROBLEM_COULD_NOT_CHECK_FILE1 = |The following database file name could not be verified on the servers(s) because the server(s) could not be accessed.
File name: |
Const PROBLEM_COULD_NOT_CHECK_FILE2 = |
Server(s): |
Const RESOLUTION_COULD_NOT_CHECK_FILE = |Verify your connection records and network setting allow you to connect to the server. | &_
|Also make sure you are allowed to access the server and the server is currently available .|
Const PROBLEM_SERVERS_NOT_BEING_COLLECTED = |All servers having their statistics monitored must also have them collected. The following server(s) are not having their statistics collected: |
Const RESOLUTION_SERVERS_NOT_BEING_COLLECTED = |Create a new Server Statistic Collection document and select the option to collect servers not being explicitly collected.
If any of the above servers are not in the current domain, then a Server Statistic Collection document must be created and each non-domain server will have to be explicitly listed.|
Const PROBLEM_MONITOR_DOC_GONE = |The monitor or probe document selected in this Event Notification is no longer available. It may have been deleted.|
Const RESOLUTION_MONITOR_DOC_GONE = "Edit the Event Notification and select a different monitor or probe."
Const PROBLEM_MONITOR_DOC_DISABLED = |The monitor or probe document selected in this Event Notification is disabled.|
Const RESOLUTION_MONITOR_DOC_DISABLED1 = "Edit the monitor or probe document "
Const RESOLUTION_MONITOR_DOC_DISABLED2 = " and de-select the disabled option in the Enablement section."
Const PROBLEM_PORTS_NOT_FOUND = |The probing server does not have these ports enabled in its server record: |
Const RESOLUTION_PORTS_NOT_FOUND = |Edit the probe document and click the ports button to select from a list of available ports.|
Const PROBLEM_SERVER_NOT_LISTED = |When using the 'Probe all configured TCP services'| &_
| option, all the target servers must be Domino servers and have servers records in the Domino Directory. | &_
|These servers do not have the required records: |
Const RESOLUTION_SERVER_NOT_LISTED = |Edit the probe document and de-select the option. Then manually select the services you wish to probe.|
EventWizard'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Queryopen(Source As Notesuidocument, Mode As Integer, Isnewdoc As Variant, Continue As Variant)
Declare Sub Queryclose(Source As Notesuidocument, Continue As Variant)
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Queryopen From Source Call Queryopen
On Event Queryclose From Source Call Queryclose
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Queryopen:1:12
Sub Queryopen(Source As Notesuidocument, Mode As Integer, Isnewdoc As Variant, Continue As Variant)
Dim firstPanel As String
'Make sure to pass to first panel you want displayed
firstPanel = "start"
Set wiz = New EventWizard( source, "Wiz", firstPanel)
End Sub
'++LotusScript Development Environment:2:2:Queryclose:1:12
Sub Queryclose(Source As Notesuidocument, Continue As Variant)
continue = confirmClose( source)
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Dim firstPanel As String
'Make sure to pass to first panel you want displayed
firstPanel = "start"
Set wiz = New EventWizard( source, "Wiz", firstPanel)
End Sub
Lotus Product
This field returns the available serverities, sorted by their number
OK to translate
0R1S
Fatal|1
Failure|2
Warning (high)|3
Warning (low)|4
Normal|5
0R1S2S3S4S5S6S7S8S
EventSeverities
StartCode
StartCode
this field is used to determine how the wizard is launched, and what wizard panels are relevant.
wizMonitor.gif
Monitor Setup Wizard
A Monitor is used to watch for certain things to happen to a database or server and then trigger an event when any of those things occur. In turn, these events can trigger an Event Notification to alert an administrator or perfom a specific action.
This wizard will guide you step by step through the process of creating a monitor.
Click the next button to continue.
start
Monitor Type
What type of monitor do you want to create?
EventType
A database monitor | dA server statistic monitor | s
EventType
Database Monitor
What type of database monitor do you want to create?
space
DBEvent
An event that fires based on non-activity | inactAn event that fires based on unused file space | spaceAn event that fires when an ACL is modified | aclAn event that fires when replication fails | rep
DBEvent
dbevt
Database to Monitor
File name:
names.nsf
xxFail
You must choose the file before you can continue.
1S2S
Filename
xxFail{
0R3S4S5S6S7S8S10S15S
Filenamez
Filename
Trigger
1S2S
Server(s):
AllServers
All servers in the domain | 1Only the following servers: | 0z
StatAllServers_1
AllServers
1S2S
xxFail
You must choose a server before you can continue.
1S2S
AllServers
ServerName
xxFail{
0R2S3S4S5S6S7S8S9S10S11S12S14S16S19S
SelectServerName
names.nsf
($Servers)
4S8S12S14S15S17S19Sz
SelectStatServerName_1
Additional servers:
AdditionalServerNamez
AdditionalStatServerName_1
SelectServerName
AdditionalServerName
2S3S4S
ServerNamez
StatServerName_1
Access Control List (ACL) Change Monitor
This monitors a database for changes in its ACL. Any change in an ACL will trigger the event.
Unused Database Space Monitor
This monitors a database for unused filespace. If the percentage of unused space exceeds the amount below, then an event is generated.
Maximum unused file space:
ffffff
xxFail1
You must select at least one server before you can continue.
1S2S
xxFail2
You must enter a percentage value between 0% and 100% before you can continue.
Automatically compact the database when the event is triggered | Y
CompactDB
space
User Inactivity Monitor
This will monitor the number of user sessions for a database. If the sessions do not exceed the specified number for a given period, then an event is generated.
What periods do you want to monitor, and what are the number of sessions that must be exceeded for each period?
Time Periods to Monitor
Daily
Sessions
xxFail
You must select at least one time period to monitor before you can continue.
1S2S
inact
Dayact
WeekAct
MonthAct
xxFail{
0R2S3S4S5S6S7S8S9S10S11S12S13S14S15S16S18S20S23S
DayAct
Daily: | Yz
DayAct
DayAct
1S2S
xxFail
You must enter the number of session before you can continue.
1S2S
inact
DayAct
DayThreshold
xxFail{
0R2S3S4S5S6S7S8S9S10S11S12S14S16S19S
DayThresholdz
DayThreshold
WeekAct
Weekly: | Yz
WeekAct
WeekAct
1S2S
xxFail
You must enter the number of session before you can continue.
1S2S
inact
WeekAct
WeekThreshold
xxFail{
0R2S3S4S5S6S7S8S9S10S11S12S14S16S19S
WeekThreshold
WeekThreshold
MonthAct
Monthly: | Yz
MonthAct
MonthAct
1S2S
xxFail
You must enter the number of session before you can continue.
1S2S
inact
MonthAct
MonthThreshold
xxFail{
0R2S3S4S5S6S7S8S9S10S11S12S14S16S19S
MonthThresholdz
MonthThreshold
inact
Replication Failure Monitor
This will monitor the database for replication failures with other servers. If the specified amount of time passes before a successful replication occurs, then replication is considered failed and an event is generated.
Maximum non-replication time:
xxFail
You must enter a time in hours before you can continue.
1S2S
Interval
xxFail{
0R2S3S4S5S6S7S8S10S12S15SIntervalz
Interval
hours
RepAllServers
AccessType
1S2S
Replication Failure Monitor
These are the servers that the database must replicate with. If any one of these fail, then the event is generated.
RepAllServers
All servers in the domain | 1Only the following servers: | 0
RepAllServers
xxFail
You must choose a server before you can continue.
1S2S
RepAllServers
TargetServerName
xxFail{
0R2S3S4S5S6S7S8S9S10S11S12S14S16S19S
SelectTargetServerName
names.nsf
($Servers)
SelectTargetServerName
Additional servers:
AdditionalTargetServerNamez
AdditionalTargetServerName
SelectTargetServerName
AdditionalTargetServerName
2S3S4S
TargetServerNamez
TargetServerName
Statistic Monitor
This will monitor a numeric server statistic. If the statistic exceeds a theshold value, then the event is generated. Choose the server you want to monitor.
StatAllServers
All servers in the domain | 1Only the following servers: | 0z
StatAllServers
StatAllServers
1S2S
xxFail
You must choose a server before you can continue.
1S2S
StatAllServers
StatServerName
xxFail{
0R2S3S4S5S6S7S8S9S10S11S12S14S16S19S
SelectStatServerName
names.nsf
($Servers)
4S8S12S14S15S17S19Sz
SelectStatServerName
Additional servers:
AdditionalStatServerNamez
AdditionalStatServerName
SelectStatServerName
AdditionalStatServerName
2S3S4S
StatServerNamez
StatServerName
Statistic Monitor
Choose the statistic you want to monitor.
HideLevel
1S2S
Statistic to monitor. You may select one statistic to monitor.
Statistic:
Free space on drive C:
StatNameKey[Name of statistic to monitor. (Press Enter for a list)
($StatisticsByDesc)
4S6S8S
StatNameKey
Full description:
StatNameKey
DispStatNameKey
DispStatNameKey
StatNameKey
($StatisticsByDesc)
StatNameKey
2S3S4S6S8S
StatNameName of statistic to monitor. (Press Enter for a list)z
StatName
StatNameKey
($Statistics)
StatName
StatNamePer
2S3S4S6S8S
StatNamePerName of statistic to monitor. (Press Enter for a list)
StatNamePer
StatNameKey
($Statistics)
StatName
Units
2S3S4S6S8S12S14S16S18S
Units
Units
stat1
Statistic Monitor:
StatNameKey
StatNameKeyDisp[Name of statistic to monitor. (Press Enter for a list)z
3S4S6S10S12S14S16S22S23S24S25S26S27S29SOperatorSend alarm when statistic is less than (<), greater than (>), or a multiple of (%) the threshold.
Operator
percent
1S2S
Generate the event when:
Operator
Operator
Operator
3S5S6S7S8S10Sf
Operator
Operator
Operator
3S5S6S7S8S10SOperatorKeySend alarm when statistic is less than, greater than, multiple of ar less then the prcent of the threshold.
The statistic is LESS THAN the threshold value| <The statistic is GREATER THAN the threshold value | >The statistic is a MULTIPLE of the threshold value | %z
OperatorKey
Threshold:
StatName
StatName_1
($Statistics)
StatName
Threshold
Value_1
3S4S6S10S12S14S16S19S
StatName
StatName_1
($Statistics)
StatName
Threshold
Value_1
3S4S6S10S12S14S16S19S
xxFail
You must enter a threshold value before you can continue.
Generate the event when the statistic falls below this percentage:
StatName
StatName_1
($Statistics)
StatName
Threshold
Value_2
3S4S6S10S12S14S16S19S
StatName
StatName_1
($Statistics)
StatName
Threshold
Value_2
3S4S6S10S12S14S16S19S
xxFail
You must enter a percentage before you can continue.
1S2S
stat2
Percent
Value_2
xxFail{
0R2S3S4S5S6S7S8S9S10S11S12S14S16S19S
Value_2Alarm threshold value.
Value_2
of the total (
StatNamePer
PerStatDisp
PerStatDisp
StatName
StatName_1z
StatName_1
PercentChoose
Value_2
Value_1
2S3S4S6S8S
Value
stat2
Event Severity
What will be the severity of the generated event?
Severity
EventSeverities
Severity
Finish
This completes the Monitor Setup Wizard. Click the Finish button to finalize your settings, or click the Previous button to go back and edit your settings.
StartCode
notify
1S2S
If you would like to use the Event Notification Setup Wizard to set up a notification when this event occurs, check the box below and click Finish.
NotificationWizard
Launch the Notification Wizard for this new event |1z
NotificationWizard
WizButtonHide
<Previous
WizButtonHide
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Click(Source As Button)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As BUTTON
Set Source = Bind(Objectname_)
On Event Click From Source Call Click
End Sub
'++LotusScript Development Environment:2:2:Click:1:12
Sub Click(Source As Button)
wiz.previous
End Sub
Lotus Product
New Button
Need a newer version of Notes to execute this button.
0S0E
<Previous
WizButtonHide
finishH
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Click(Source As Button)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As BUTTON
Set Source = Bind(Objectname_)
On Event Click From Source Call Click
End Sub
'++LotusScript Development Environment:2:2:Click:1:12
Sub Click(Source As Button)
wiz.next
End Sub
Lotus Product
New Button
Need a newer version of Notes to execute this button.
0S0E
Next>
WizButtonHide
finishH
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Click(Source As Button)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As BUTTON
Set Source = Bind(Objectname_)
On Event Click From Source Call Click
End Sub
'++LotusScript Development Environment:2:2:Click:1:12
Sub Click(Source As Button)
wiz.complete
End Sub
Lotus Product
New Button
Need a newer version of Notes to execute this button.
Need a newer version of Notes to execute this button.
0S0E
Create a new notification profile for this event..
2S3S4S6S8S
/ Enablement
Disabledelect to temporarily disable this monitor.
Disable this monitor| 1
Disabled
1S2S
Once saved, this monitor will be disabled. You can re-enable it at any time.
Other
monitor.gif
Edit Document
Categori_zeK
Send Docu_ment
_Forward
_Move to Folder...
_Remove from Folder...
2S3S4S6S13S18S22S26R28S33S38S
ok.gif
CancelF
SaveOptions
1S2S3S
cancel.gif
Edit
0S0E
edit.gif
Edit Document
Categori_zeK
Send Docu_ment
_Forward
_Move to Folder...
_Remove from Folder...
2S3S4S6S13S18S22S26R28S33S38S
CancelF
SaveOptions
1S2S3S
Edit
0S0E
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
$Author
HideLevel
$Info
$WindowTitle
$AppHelpFormula
$WebFlags
$$ScriptName
$Body
$V5ACTIONS
$ACTIONS
Lotus Product
OBJECT
tFormName
File Monitor
1S2S
tFormName
tFormName
MonitorNumber
0R2S4S5S6S8S9S10S12S13SN
(Help)
events5_f_file_monitor
0S0E
"Small Fonts
Lotus Product
OBJECT
File Monitor
Field that needed by the server tasks: MonitorNumber, ServerName,Database, FreeSpaceCheck, Freespace, CompactDb, UserActCheck DayAct, WeekAct, MonthAct, DayThreshold, WeekThreshold, MonthThreshold, Severity, Enabled, Notify
This field returns the available serverities, sorted by their number
OK to translate
0R1S
Fatal|1
Failure|2
Warning (high)|3
Warning (low)|4
Normal|5
0R1S2S3S4S5S6S7S8S
EventSeverities
HideLevel
1S2S
File Monitor
Disabled
- DISABLED
2S3S4S6S2E8S
DispDisabled
Event Number:
MonitorNumber
HideLevel
1S2S
/ Database to monitor
File name:
names.nsf
Database
You must enter a database filename before you can continue.
2S3S4S6S8S11SDatabaseFile name of database to monitor.
Trigger
1S2S
Server(s):
ServerName
2S3S4S5S6S8S10SAllServers
All in the domain | 1Only the following: | 0
AllServers
Trigger
1S2S3S4S5S6S
AllServers
ServerName
2S3S4S6S8S10S14S16S
AllServers
ServerName
You must enter the database server name before you can continue.{
2S3S4S5S6S7S8S10S12S15SServerNameDistinguished name(s) of server(s) to monitor.
Field that needed by the server tasks: MonitorNumber, StatName, StatNamePer, ServerName, Value, Value_1, Value_2, Operator, Enabled, Description, Comment, Percent
This field returns the available serverities, sorted by their number
OK to translate
0R1S
Fatal|1
Failure|2
Warning (high)|3
Warning (low)|4
Normal|5
0R1S2S3S4S5S6S7S8S
EventSeverities
Hidden
Statistic Monitor
Disabled
- DISABLED
2S3S4S6S2E8S
DispDisabled
Event Number:
MonitorNumber
MonitorNumber
HideLevel
1S2S
/ Server(s) to monitor
Trigger
1S2S
ServerName
2S3S4S5S6S8S10SAllServers
All in the domain | 1Only the following: | 0
AllServers
Trigger
1S2S3S4S5S6S
AllServers
ServerName
2S3S4S6S8S10S14S16S
AllServers
ServerName
You must enter the database server name before you can continue.{
2S3S4S5S6S7S8S10S12S15SServerNameDistinguished name(s) of server(s) to monitor.
3S4S6S10S12S14S16S22S23S24S25S26S27S29SOperatorSend alarm when statistic is less than (<), greater than (>), or a multiple of (%) the threshold.
Operator
Basics
/ Threshold
Percent
1S2S
Generate the event when:
Operator
Operator
Operator
3S5S6S7S8S10Sf
Operator
Operator
Operator
3S5S6S7S8S10SOperatorKeySend alarm when statistic is less than, greater than, multiple of ar less then the prcent of the threshold.
The statistic is LESS THAN the threshold value| <The statistic is GREATER THAN the threshold value | >The statstic is a MULTIPLE of the threshold value | %
OperatorKey
Threshold:
StatName
StatName_1
($Statistics)
StatName
Threshold
Value_1
3S4S6S10S12S14S16S19S
StatName
StatName_1
($Statistics)
StatName
Threshold
Value_1
3S4S6S10S12S14S16S19S
xxFail
You must enter a threshold value before you can continue.
ProbeWizard'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Queryclose(Source As Notesuidocument, Continue As Variant)
Declare Sub Queryopen(Source As Notesuidocument, Mode As Integer, Isnewdoc As Variant, Continue As Variant)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Queryclose From Source Call Queryclose
On Event Queryopen From Source Call Queryopen
End Sub
'++LotusScript Development Environment:2:2:Queryclose:1:12
Sub Queryclose(Source As Notesuidocument, Continue As Variant)
continue = confirmClose( source)
End Sub
'++LotusScript Development Environment:2:2:Queryopen:1:12
Sub Queryopen(Source As Notesuidocument, Mode As Integer, Isnewdoc As Variant, Continue As Variant)
Dim firstPanel As String
'Make sure to pass to first panel you want displayed
firstPanel = "start"
Set wiz = New ProbeWizard( source, "Wiz", firstPanel)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Exiting(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Exiting From Source Call Exiting
End Sub
'++LotusScript Development Environment:2:2:Exiting:1:12
Sub Exiting(Source As Field)
End Sub
Lotus ProductK
This field returns the available serverities, sorted by their number
OK to translate
0R1S
Fatal|1
Failure|2
Warning (high)|3
Warning (low)|4
Normal|5
0R1S2S3S4S5S6S7S8S
EventSeverities
StartCode
StartCode
this field is used to determine how the wizard is launched, and what wizard panels are relevant.
wizprobe.gif
StartCode
notify
1S2S
Probe Wizard
A Probe is used to periodically test the availability of a resource. It will track the length of time it takes to access the resource, and if too much time passes it will generate an event.
This wizard will guide you step by step through the process of creating a probe.
Click the next button to continue.
start
Probe Type
What type of probe do you want to create?
domino
ProbeType
A Domino server probe | dominoA TCP server probe | tcpA mail probe | mailz
EventType
domino
HideLevel
Domino Server Probe
The Domino Server probe test the ability to access a Domino server.
What server(s) do you want to probe?
AllDominoTargetServers
All servers in my domain| 1Only these servers: | 0
PortsDistinguished name(s) of server on which database resides.
Hidden
AnyPort
1S2S
domports
Mail Probe
A mail probe is used to test email connectivity between two mail hosts. It sends a test message and waits for a delivery confirmation. Once the confirmation is received, the probe is complete, if the confirmation does come within a specified period of time, then an event is generated.
To what recipient do you want to send the probe?
AllSelfMonitor
1S2S
tType
Cache
names.nsf
($Users)
TargetRecipient
1S2S4S5S6S8S12S14S15S17S19S21S
tType
tType
Group
The recipient listed matches a group name. Group names are not allowed as recipients.{
TargetRecipient
You must enter a recipient for the mail probe.{
0R2S3S4S6S8S11S13S14S15S16S17S18S20S23S27S
TargetRecipientThe recipient of the mail probe.
TargetRecipient
Note: Only one mail address should be listed as the recipient. Do not use group names or multiple addresses as it will cause the probe to fail.
TCP Server Probe
A TCP Server probe is used to test the availabilty of a server and its TCP services.
What server(s) do you want to probe?
AllTCPTargetServers
All servers in my domain| 1Only these servers: | 0
Note: Enter the IP address or DNS name for non-Domino servers
SelectTCPTargetServers
AdditionalTCPTargetServers
2S3S4S
TCPTargetServers
services
TCP Services to Probe
AllServices
Probe all configured TCP services|1Probe these services:|0
AllServices
1S2S
When this is selected, all destination servers must be Domino servers, and they must be in same domain as the source server or have server records in the source server's Name & Address book.
AllServices
1S2S
0S0E
services
AllServices
Services
You must select a service to probe before you can continue.
You must enter a news group before you can continue.{
2S3S4S5S6S7S8S9S10S11S12S13S14S15S16S17S18S19S20S21S22S23S24S25S26S27S28S30S33SNNTPGroupEnter the name of the newsgroup the command should execute on.
NNTPGroup
source
Probing Server
The probing server is the server that is performing the probe.
What server(s) should perform the probe?
xxFail
You must choose a server before you can continue.
1S2S
source
SourceServers
xxFail{
0R2S3S4S5S6S8S10S12S15SSelectSourceServers
names.nsf
($Servers)
4S8S12S14S15S17S19S
Additional servers:
AdditionalSourceServers
SelectSourceServers
AdditionalSourceServers
2S3S4S
SourceServers
source
times
Probe Interval and Timeout
How often should the probe be performed?
ProbeType
domino
1S2S
Interval:
times
ProbeType
domino
ProbeInterval
ProbeInterval
You must enter a positive number for the probe interval before you can continue.{
2S3S4S5S6S7S8S9S10S2E12S13S14S15S16S17S20S22S25S
ProbeInterval
minutes
ProbeType
1S2S
Interval:
times
ProbeType
MailProbeInterval
MailProbeInterval
You must enter a positive number for the probe interval before you can continue.{
2S3S4S5S6S7S8S9S10S12S13S14S15S16S17S20S22S25S
MailProbeInterval
minutes
ProbeType
1S2S
Interval:
times
ProbeType
TCPProbeInterval
TCPProbeInterval
You must enter a positive number for the probe interval before you can continue.{
2S3S4S5S6S7S8S9S10S12S13S14S15S16S17S20S22S25S
TCPProbeInterval
minutes
How long should the probe be attempted before it timesout and generates an event?
Timeout:
times
ProbeType
domino
AccessTimer
AccessTimer
You must enter a positive number for the timeout threshold before you can continue.
2S3S4S5S6S7S8S9S10S13S14S15S16S17S20S22S25SAccessTimerFile name of database to monitor. "*" means all databases.
Msecs.
Timeout:
times
ProbeType
MailTimeout
MailTimeout
You must enter a positive number for the timeout threshold before you can continue.
2S3S4S5S6S7S8S9S10S2E13S14S15S16S17S20S22S25SMailTimeoutFile name of database to monitor. "*" means all databases.
minutes
Timeout:
times
ProbeType
TCPTimeout
TCPTimeout
You must enter a positive number for the timeout threshold before you can continue.
2S3S4S5S6S7S8S9S10S13S14S15S16S17S20S22S25STCPTimeoutFile name of database to monitor. "*" means all databases.
seconds
times
Event Severity
When the probe times out, what will be the severity of the generated event?
Severity
EventSeverities
Severity
Finish
This completes the Probe Setup Wizard. Click the Finish button to finalize your settings, or click the Previous button to go back and edit you settings.
If you would like to use the Event Notification Setup Wizard to set up a notification when this event occurs, check the box below and click Finish.
NotificationWizard
Launch the Notification Wizard for this new event |1z
NotificationWizard
WizButtonHide
<Previous
WizButtonHide
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Click(Source As Button)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As BUTTON
Set Source = Bind(Objectname_)
On Event Click From Source Call Click
End Sub
'++LotusScript Development Environment:2:2:Click:1:12
Sub Click(Source As Button)
wiz.previous
End Sub
Lotus ProductK
New Button
Need a newer version of Notes to execute this button.
0S0E
<Previous
WizButtonHide
finishH
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Click(Source As Button)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As BUTTON
Set Source = Bind(Objectname_)
On Event Click From Source Call Click
End Sub
'++LotusScript Development Environment:2:2:Click:1:12
Sub Click(Source As Button)
wiz.next
End Sub
Lotus Product
New Button
Need a newer version of Notes to execute this button.
0S0E
Next>
WizButtonHide
finishH
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Click(Source As Button)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As BUTTON
Set Source = Bind(Objectname_)
On Event Click From Source Call Click
End Sub
'++LotusScript Development Environment:2:2:Click:1:12
Sub Click(Source As Button)
wiz.complete
End Sub
Lotus Product
OBJECT
New Button
Need a newer version of Notes to execute this button.
Field that needed by the server tasks: MonitorNumber, ServerName, TargetServerName, Ports, AccessType, Database, AccessTimer, Severity, Enabled, Description, Notify
This field returns the available serverities, sorted by their number
OK to translate
0R1S
Fatal|1
Failure|2
Warning (high)|3
Warning (low)|4
Normal|5
0R1S2S3S4S5S6S7S8S
EventSeverities
Domino Server Probe
Disabled
- DISABLED
2S3S4S6S2E8S
DispDisabled
Event Number:
MonitorNumber
AllSelfMonitor
1S2S
/ Target server(s)
TargetServerName
2S3S4S6S8S10SAllTargetServers
All in the domain | 1Only the following: | 0
AllTargetServers
AllSelfMonitor
1S2S3S4S5S6S
AllTargetServers
TargetServerName
2S3S4S6S8S10S14S16S
AllTargetServers
TargetServerName
You must enter the destination server name before you can continue.
2S3S4S5S6S7S8S10S12S15STargetServerNameDistinguished name(s) of server(s) to monitor.
You must enter a probe interval which is greater than zero.
5S6S7S
TCPProbeIntervalTCP Probe interval.
TCPProbeInterval
minutes
Service timeout threshold:
AllSelfMonitor
0S0E
AllSelfMonitor
TCPTimeout
0S0E
TCPTimeOut
TCPTimeOut
You must enter a timeout interval which is greater than zero.
3S5S6S
TCPTimeoutMaximum time to allow before abandoning a check of an IP service.
TCPTimeout
seconds
/ Services
Services
2S3S4S6S8S
AllSelfMonitor
AllServices
2S3S4S6S8S
AllServices
Probe all configured TCP services|1Probe these services:|0
AllSelfMonitor
AllServices
1S2S3S4S5S6S
When this is selected, all destination servers must be Domino servers, and they must be in the current domain or have server records in the Domino Directory.
AllSelfMonitor
AllServices
1S2S3S4S5S6S
0S0E
AllServices
Services
You must select at least on service to probe before you continue.
'++LotusScript Development Environment:2:5:(Options):0:74
Option Public
Option Declare
Use "ServerInformation"
Use "StackContainer"
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Class StatCollection
Declare Sub Terminate
'++LotusScript Development Environment:2:5:(Declarations):0:10
Const CONTINUE_SERVERS_LIST = "These servers apparently are not having there statistics collected. " & _
|You will have to later create a Server Statistic Collection and set up collection for the servers in order to to successfully monitor the server statistics.
Servers: |
Const CONTINUE_ANYWAY= |
Continue anyway?|
Const CONTINUE_ALL_SERVERS = "All servers in the domain do not appear to be having their statistics collected. " &_
"You will have to later create a Server Statistic Collection and set up collection all servers in order to to successfully monitor statistics."
Const SERVERS_NOT_COLLECTED_TITLE = "Server(s) Not Being Collected"
Class StatCollection
db As NotesDatabase
viewTargetServers As NotesView
servers As AllDominoServers
Private allServersCollected As Integer
Private checkedAllServersCollected As Integer
Private allOtherServersCollected As Integer
Private checkedAllOtherServersCollected As Integer
Sub new( eventsDB As NotesDatabase, allServers As AllDominoServers)
Set db = eventsDB
Set viewTargetServers = db.getView( "($TargetServers)")
viewTargetServers.refresh
Set servers = allServers
End Sub
Function isServerBeingCollected( serverName As String) As Integer
Dim serverInfo As DominoServerInfo
Set serverInfo = servers.getServerInfo( serverName)
If servers.isInCurrentDomain( serverInfo ) Then
If AreAllServersBeingCollected Or AreAllOtherServersBeingCollected Then
Sub new( currentDB As NotesDatabase, servers As AllDominoServers)
Set db = currentDB
Set s = New NotesSession
Set Me.servers = servers
End Sub
Public Property Get docType As String
End Property
Private Function isAllServers( serverName As String) As Integer
If Len(serverName) = 0 Or serverName = "*" Then
isAllServers = True
Else
isAllServers = False
End If
End Function
Private Function getEntries As NotesViewEntryCollection
End Function
Private Sub outputMessage( message As String)
If Not statusOutput Is Nothing Then
statusOutput.output( message)
End If
End Sub
Function generateConfigProblems As StackContainer
End Function
End Class
'++LotusScript Development Environment:2:1:cDocConfigProblems:1:8
Function cDocConfigProblems ( v As Variant) As DocConfigProblems
If Not Isempty(v) Then
Set cDocConfigProblems = v
End If
End Function
'++LotusScript Development Environment:2:1:cConfigTroubleshoot:1:8
Function cConfigTroubleshoot ( v As Variant) As ProblemResolutionPair
If Not Isempty(v) Then
Set cConfigTroubleshoot = v
End If
End Function
'++LotusScript Development Environment:2:1:cTroubleShootConfigDocsAbstract:1:8
Function cTroubleShootConfigDocsAbstract ( v As Variant) As TroubleShootConfigDocsAbstract
If Not Isempty(v) Then
Set cTroubleShootConfigDocsAbstract = v
End If
End Function
'++LotusScript Development Environment:2:1:cProblemResolutionPair:1:8
Function cProblemResolutionPair ( v As Variant) As ProblemResolutionPair
If Not Isempty(v) Then
Set cProblemResolutionPair = v
End If
End Function
*L,L,
Lotus Product
d/d/h.h.`0`0h1h1
#L(L(
4d#d#
-#,8.#
,h.}D
1#U\1
#,h1I
,(2/d
!,(2}
!,(2}
, 4#5
!,(2}
!,(2}
!,(2}L
!,(2K
],,I<,
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
$TITLE
$PublicAccess
$ScriptLib
$ScriptLib_O
Troubleshooting Report:
1S2S
Lotus Product
OBJECT
TroubleShootingReport
SaveOptions
Troubleshooting Report:
DBTitle
gears.gif
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
$Info
$WindowTitle
$$Script_O
$$ScriptName
$Body
&Arial
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Exiting(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Exiting From Source Call Exiting
End Sub
'++LotusScript Development Environment:2:2:Exiting:1:12
Sub Exiting(Source As Field)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:74
Option Public
Option Declare
Use "StatEventWizards"
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Class TroubleshootingWizard As Wizard
'++LotusScript Development Environment:2:5:(Declarations):0:10
Dim wiz As Wizard
Class TroubleshootingWizard As Wizard
Sub new ( doc As NotesUIDocument, tableName As String, firstPanel As String), Wizard( doc, tablename, firstPanel)
End Sub
Function processNext( wizNote As NotesDocument, currentPanel As String) As String
Select Case currentPanel
Case "start"
processNext = "type"
Case "type"
If wizNote.getItemValue( "GotoFile")(0) = "1" Then
processNext = "file"
Else
activateNextButton False
processNext = "fin"
End If
Case "file"
activateNextButton False
processNext = "fin"
Case Else
activateNextButton False
processNext = "fin"
End Select
End Function
End Class
Lotus Product
OBJECT
TroubleshootingWizard'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Queryopen(Source As Notesuidocument, Mode As Integer, Isnewdoc As Variant, Continue As Variant)
Declare Sub Queryclose(Source As Notesuidocument, Continue As Variant)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Queryopen From Source Call Queryopen
On Event Queryclose From Source Call Queryclose
End Sub
'++LotusScript Development Environment:2:2:Queryopen:1:12
Sub Queryopen(Source As Notesuidocument, Mode As Integer, Isnewdoc As Variant, Continue As Variant)
Dim firstPanel As String
'Make sure to pass to first panel you want displayed
firstPanel = "start"
Set wiz = New TroubleshootingWizard( source, "Wiz", firstPanel)
End Sub
'++LotusScript Development Environment:2:2:Queryclose:1:12
Sub Queryclose(Source As Notesuidocument, Continue As Variant)
continue = confirmClose( source)
End Sub
Lotus Product
OBJECT
troubleshooting.gif
StartCode
notify
1S2S
Statistics & Events Troubleshooting Wizard
This wizard will examine the current database and attempt to identify any misconfigured documents. Then once completed, it will display a full report detailing the problems and their possible resolutions.
Click the next button to continue.
start
Types to Troubleshoot
What types of documents do you want to troubleshoot?
Monitors:
Probes:
1S2S3S4S5S6S
DocTypes
You must select at least one type of document to troubleshoot before you can continue.{
2S3S4S5S6S7S8S10S12S15SMonitors
ACL Change | aclFile | fileReplication | repStatistic | stat
One or more of the configuration documents you chose to troubleshoot may rely on a database file name and path being correctly entered. The troubleshooting process can attempt verify that those file names are correct on each specified server, and report to you which filenames may have been entered incorrectly.
This verification process can be very lengthy, depending on the speed and capacity of your network connections and Domino servers.
Would you like the troubleshooting process to verify the database file names?
VerifyFileNames
Yes | 1No | 0
Begin Troubleshooting
Click the finish button to begin the troubleshooting process or click previous to go back and edit your settings.
WizButtonHide
<Previous
WizButtonHide
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Click(Source As Button)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As BUTTON
Set Source = Bind(Objectname_)
On Event Click From Source Call Click
End Sub
'++LotusScript Development Environment:2:2:Click:1:12
Sub Click(Source As Button)
wiz.previous
End Sub
Lotus Product
New Button
Need a newer version of Notes to execute this button.
0S0E
<Previous
WizButtonHide
finishH
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Click(Source As Button)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As BUTTON
Set Source = Bind(Objectname_)
On Event Click From Source Call Click
End Sub
'++LotusScript Development Environment:2:2:Click:1:12
Sub Click(Source As Button)
wiz.next
End Sub
Lotus Product
OBJECT
New Button
Need a newer version of Notes to execute this button.
0S0E
Next>
WizButtonHide
finishH
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Click(Source As Button)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As BUTTON
Set Source = Bind(Objectname_)
On Event Click From Source Call Click
End Sub
'++LotusScript Development Environment:2:2:Click:1:12
Sub Click(Source As Button)
wiz.complete
End Sub
Lotus ProductK
New Button
Need a newer version of Notes to execute this button.
0S0E
Finish
0S0E
Cancel
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
";:|ykK#$
Freespace
DayThreshold
WeekThreshold
MonthThreshold
Value_1
Value_2
Value
Interval
$$NNTPCommand
$NNTPCommand_O
ProbeInterval
MailProbeInterval
TCPProbeInterval
AccessTimer
MailTimeout
TCPTimeout
$Info
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$Body
< < P
7yHq(
G&POz|5f
eZWro
7#dF4
,R>aA
(aC@U
J%NYa
%w|"'
gOjqz
W]J3Z|
3)U$sl
ZROA]
oqvB5
cL!mr
Vb[/[
< < 8
~oy#;
'++LotusScript Development Environment:2:5:(Options):0:74
Option Public
Option Declare
Use "EventsTroubleshooting"
Use "StatEventWizards"
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Class TroubleshootingWiz As Wiz
'++LotusScript Development Environment:2:5:(Declarations):0:10
Const NO_PROBLEMS_FOUND_MESSAGE = "The troubleshooting process could find no configuration problems in the areas you chose to examine."
Const NO_PROBLEMS_FOUND_WINDOW_TITLE = "No Problems Found"
MessageERR_UNDEF0x054AThe variable name specified in @Set must be declared prior to use. To declare it, place VarName:=VarName; at the top of your formula.PKG_FORMULAerror
MessageERR_UNDEFFIELD0x054BThe field name specified in @SetField must be declared prior to use. To declare it, place FIELD FieldName:=FieldName; at the top of your formula.PKG_FORMULAerror
StatisticNNTP."RemoteServerName".Pull.Articles.TransferedNumberArticlesNumber of news articles transfered from "RemoteServerName" to the NNTP server during pull feeds.VariesYes>
StatisticNNTP."RemoteServerName".Push.Articles.TransferedNumberArticlesNumber of news articles transfered to the server "RemoteServerName" by the NNTP server during push feeds.VariesYes>
\@MessageERR_MAC_FINDER_LOCKED0x01CFCannot perform this action because the file is locked. Unlock the file using the Finder's Get Info command.PKG_OSerror5
\@MessageFiles needed for this feature are not currently installed. To use this feature, rerun the Notes Install program and install the necessary components.0x01E35
\@MessageHelp files are not currently installed. To use this feature, access help on a Domino server or the web, or rerun the Notes Install program and install the necessary components.0x01E45
\@MessageSpelling and dictionary files requested are not currently installed. To use this feature, rerun the Notes Install program and install the necessary components.0x01E55
\@MessageInformational, rebuilding view - notes have been purged since last update (reading <'Collection'> <'Class name'> note Title:<'View Title'>)0x021F
\@MessageInformational, rebuilding view - database cutoff date later than last update (reading <'Collection'> <'Class name'> note Title:<'View Title'>)0x0227
\@MessageERR_RSP_ADDTO_HIERFOLD0x03BDTo move a response document to a folder that shows response hierarchy you need to move the topmost parent of the responsePKG_NSF2error10
\@MessageERR_RSP_REMFROM_HIERFOLD0x03BETo remove a response document from a folder that shows response hierarchy you must also remove the topmost parent of the responsePKG_NSF2error10
\@MessageERR_NEWVIEWTYPE_OLDSERVER0x049CSorry, this database is on a server running a previous version of Lotus Notes that does not support this type of view or folder.PKG_MISCerror6
\@MessageERR_ADMIN_NO_REQ_FIELD0x0557A selected note is missing a required field and cannot be acted upon by the Administration Process.PKG_FORMULAerror12
\@MessageInformational: The registry value HKEY_LOCAL_MACHINE\\<Registry Value Name> is currently set to <Value>. For better server performance, change the setting to <Value>0x09FD7
\@MessageUnable to load Network Dailup <Service Name> adapter (<Error Message>). Check that the <Service Name> dialer is installed on this system0x0AE911
\@MessageERR_MAIL_NOPUBLICKEY5090x0E36This recipient's Internet certificate could not be found in the Directory. Either no entry was found with a matching Internet Address or a matching entry was found which did not contain an Internet certificate.PKG_MAILerror3
\@MessageThe Internet format of this message was not sent to the following <Number> recipients, but another copy was already sent to <Number> recipients: <Recipient List>0x0E373
\@MessageERR_MAIL_KEY_NOT_FOUND0x0E38You have requested to sign this Internet message, but your Internet certificate could not be found. Select OK to send the message anyway. Select Cancel to not send the message.PKG_MAILerror3
\@MessageERR_ADMIN_REQ_DB_NOT_INIT0x0EACThe Administration Request Database cannot be opened; it has not yet been initialized by the Administration Process.PKG_NSF4error10
\@MessageUnable to open Name and Address Book (<File Name>), due to error '<Error Message>'. Locations cannot be used until the problem has been corrected.0x0FCB11
\@MessageUnable to create any locations, '<File Name>' does not contain a required view. Please replace the design with the Address book template. After the design is replaced, restarting Notes will create default locations.0x0FCC11
\@MessageERR_REMOTE_LAN_CONNECT_FAILED0x0FF9The connection attempt has failed. The modems did not connect properly. Please try again.PKG_NETWORK2error11
\@MessageERR_ROUTER_DELIVER_LOOP0x1117Maximum forwarding loop count exceeded. Message probably in a forwarding loop. Examine Forwarding Address of intended recipient in Address Book.PKG_ROUTERerror3
\@MessageERR_SCHED_QUERY_SMALLER_DATE_RANPKG_NSF30x1381The date range for this busy time query contains too much busy time data. Query a shorter range of days.PKG_NSF3error10
\@MessageFolder <Name> (NT <Note ID>) in database <Name> is corrupted. This folder will be purged on the next access of this database: <Error Message>0x13B310
\@MessageNote ID <Number> has items that are causing the Compute subsystem to generate a 64K error. This note will not be included in search results.0x13B710
\@MessageMSG_NNTP_ARCHIVE_HELPER0x13BAAn existing archive database has been specified. Please use the following options to specify what should be done to the original archive database.PKG_NSF3error10
\@MessageREPLICA: Building SOURCE list (<Path name>) since <Time>; cutoff=<Time>; flags=<Hex Number>; SourceClass=<Hex Number>; AuxClass=<Hex Number>0x166A4
\@MessageREPLICA: V2-V3 Access Difference Detected - not performing a full search - Cached = <Read>:<Create>:<Modify>:<Special>; New = <Read>:<Create>:<Modify>:<Special>0x167C4
\@MessageREPLICA: Access has changed, doing a Full Search - Cached = <Read>:<Create>:<Modify>:<Special>; New = <Read>:<Create>:<Modify>:<Special>0x167D4
\@MessageLOG_REPL_UNID_ERR0x1681REPLICA: Error in DEBUG_REPL_UNID format - should be OF85255D56:004D3F63-ON85255B43:0044B96E. Specified UNID will not be traced.PKG_REPLerror4
\@MessageERR_BSAFE_INVCROSSCERT_SIG0x178CThe signature on the cross certificate was found to be invalid. Check the log file for details.PKG_BSAFEerror2
\@MessageERR_BSAFE_WRONG_SUBJECT_KEY_SRV0x1793The public key that is being used does not match the one that was certified. Check the server's log file for details.PKG_BSAFEerror2
\@MessageERR_BSAFE_WRONG_SUBJECT_KEY_LOC0x1794The public key that is being used does not match the one that was certified. Check the local log file for details.PKG_BSAFEerror2
\@MessageERR_BSAFE_CERT_NOT_ANCESTOR_SRV0x1795The certifier is not an ancestor of the subject in the certificate. Check the server's log file for details.PKG_BSAFEerror2
\@MessageERR_BSAFE_CERT_NOT_ANCESTOR_LOC0x1796The certifier is not an ancestor of the subject in the certificate. Check the local log file for details.PKG_BSAFEerror2
\@MessageERR_SECURE_PROPOSED_ALTNAME_NOT_PKG_SECURE0x194EThe proposed alternate name could not be used because an alternate name has already been assigned.PKG_SECUREerror2
\@MessageERR_SECURE_NOT_ALT_ANCESTOR0x194FThe Certifying Authority has not been assigned an alternate name which is an ancestor of the alternate name specified.PKG_SECUREerror2
\@MessageERR_SECURE_NT_SETPASSWORD0x1954Unable to set your NT password successfully. You must manually change your NT password to match your new Notes password.PKG_SECUREerror2
\@MessageERR_SECURE_PW_SUPPORT_VERS0x199CThe server requires that you be running Notes version 4.5 or greater in order to test your passwordPKG_SECUREerror2
\@MessageERR_SECURE_CERT_NOT_NEWER0x199DDid not accept the new certificates because they were not issued after the current certificatesPKG_SECUREerror2
\@MessageERR_SECURE_WRONG_NEWABPI0x19C4The certificate stored in the change request entry is not for the key specified in the change requestPKG_SECUREerror2
\@MessageERR_SECURE_WRONG_OLDABPI0x19C5The keys stored in the Address Book document for this entry are not the same as the keys specified in the change requestPKG_SECUREerror2
\@MessageERR_SECURE_PASS_NOT_SAME0x19ECYour NT account password does not match your Notes password. To synchronize the passwords, use File - Tools - User ID and click Set Password.PKG_SECUREerror2
\@MessageERR_SECURE_NT_RELOGON0x19EDYour new NT password is set. To complete the synchronization, you must log off and back into your NT account. Do you want to log off now?PKG_SECUREerror2
\@MessageERR_SECURE_UNSYNCED_PASSWORD0x19EEYou have a different password on another copy of your ID file and you must change the password on this copy to matchPKG_SECUREerror2
\@MessageThe name <Current Name> could not be changed to <New Name> in the Readers and Authors fields of the signed and encrypted documents in <Database>.0x19EF2
\@MessageERR_SECURE_PW_CLOCK_PROBLEM0x19F3Connection failed because of a problem with clock synchronization and password change intervals. Check your clock setting, change your password, or consult your system administratorPKG_SECUREerror2
\@MessageERR_SECURE_BAD_TEMPLATE_KEY0x19F6The version of the Notes you are running does not recognise the Template Development key that signed this documentPKG_SECUREerror2
\@MessageERR_SECURE_FLAT_PASSWORD0x19F8The server you are trying to access requires password enhanced authentication, which is not possible with a non-hierarchical ID. Tell your system administrator to either upgrade your ID or remove the requirement on the server.PKG_SECUREerror2
\@MessageERR_SECURE_PWD_REALLY_EXPIRED0x19FCYour password expired and your account is locked out; see your system administrator to reset itPKG_SECUREerror2
\@MessageERR_SECURE_NEW_PW_IN_FUTURE0x19FEThe new password could not be accepted because the change date was in the future. Check for mis-set clocksPKG_SECUREerror2
\@MessageERR_NETBIOS_NAME_TABLE_FULL0x1C06Insufficient NetBIOS names were available. Consult network documentation to increase the number of configured names.PKG_NETDRVerror11
\@MessageERR_NETBIOS_MAX_NCBS0x1C07Insufficient NetBIOS commands were available. Consult network documentation to increase the number of configured commands.PKG_NETDRVerror11
\@MessageERR_NETBIOS_MEM_LOCK_FAILED0x1C09The NetBIOS protocol stack was unable to lock memory. The system may have insufficient memory for the current load.PKG_NETDRVerror11
\@MessageERR_BV_NO_W32_VENDOR_DLL0x1C1FThe required Vines client application files have not been installed. The VNSAPI32.DLL library could not be loaded.PKG_NETDRVerror11
\@MessageERR_BV_NO_OS2_VENDOR_DLL0x1C20The required Vines client application files have not been installed. The VNSAPI32.DLL or VNSAPI16.DLL, libraries could not be loaded.PKG_NETDRVerror11
\@MessageERR_BV_NO_W16_VENDOR_DLL0x1C21The required Vines client application files have not been installed. The VNSAPI.DLL library could not be loaded.PKG_NETDRVerror11
\@MessageThe OS/2 AppleTalk protocol driver was not fully initialized, and the server will have to be rebooted. If this error happens frequently, try adding the command "TPAUSE 60" to startup.cmd.0x1C3611
\@MessageERR_NW_NO_NETWIN32_DLL0x1C89Warning: NETWIN32.DLL could not be loaded. NDS cannot be initialized. Install NDS or disable the Notes NDS Services.PKG_NETDRVerror11
\@MessageERR_NW_NDS_INSUF_PRIV0x1C9ENotes NDS operation failed due to insufficient privileges. Login to NDS, if problem persists see your Notes Administrator.PKG_NETDRVerror11
\@MessageERR_NW_NDS_LOGIN_FAILED0x1CA2Notes unable to access the NDS Tree, login failed. Please verify your NDS UserID, Password, and NDS name context.PKG_NETDRVerror11