People and Groups | directoryFiles | filesMessaging Mail | mailMessaging Tracking Center | msgtrackingServer Status | statusServer Analysis | analysisServer Monitoring | monitoringServer Statistics | statisticsConfiguration | configurationz
Compact all databases | 0Compact only this database or folder: | 1
filename
Basics
Space
Compact database only if unused space | -S
is greater than
SpacePercent
percent
Discard
Discard any built view indexes | -D
$Server_Build
1S2S
Revert4
Keep or revert database back to R3 format | -R
$Server_Build
1S2S
Revert5
Keep or revert database back to R4 format | -R
Maximum
Set maximum size of database to 4GB | -M
Options
Compaction style:
InplaceNoReduce
In-place (recommended) | -b
InplaceReduce
In-place with file size reduction | -B
CopyStyle
Copy-style | -c
Access
Allow access while compacting | -L
Ignore
Ignore errors and proceed | -I
Style
advanced
Set advanced properties: | 1
Document table bitmap optimization:
On | -FOff | -f
Don't support specialized response hierarchy:
On | -HOff | -h
Enable transaction logging:
On | -TOff | -t
Maintain unread marks:
On | -UOff | -u
Advanced
archive
Archive: | 1
archiveOptions
Archive only | -AArchive and compact | -a
Archive
Basics
GroupShadeHelp
Context Help
Specify whether Compact should run on all databases or only on a single database or folder on the current server.
1S2S3S4S
h_file
Enter the filename of a database or foldername containing databases you want to compact.
For example: mail\pspilles.nsf"
1S2S3S4S5S6S7S8S
h_filename
Enables compacting to continue even if it encounters errors such as document corruption. Only used for copy-style compaction.
1S2S3S4S
h_ignore
Compacts all databases with a specified percent of unused space ('whitespace').
1R3S4S5S6S
h_space
For example, if you specify 10, databases with 10% or more recorded unused space are compacted.
1S2S3S4S5S6S
h_spacePerCent
Use this option to compact databases just before you store them on tape, for example.
Does copy-style compacting.
1S2S3S4R5R6S7S8S
h_discard
Compacts R3 databases without converting them to the R4 file format and converts R4 databases to the R3 file format.
1S2S3S4S
h_revert4
Compacts R4 databases without converting them to the R5 file format and converts R5 databases to the R4 file format. Uses copy-style compacting.
1S2S3S4S
h_revert5
Sets a maximum database size of 4GB and compacts a database. Used only on Release 4 file format databases. Does copy-style compacting.
1S2S3S4S
h_maximum
Enables users to continue to access databases during compacting. If a user edits a database during compacting, compacting is cancelled. Useful only with copy-style compaction.
1S2S
h_access
Recovers unused space without reducing the file size, unless there's a pending structural change to a database, in which case copy-style compaction occurs.
1S2S
h_InplaceNoReduce
Recovers unused space and reduces file size, unless there's a pending structural change in which case copy-style compacting occurs. If you use transaction logging, do full database backups after compacting completes.
h_inplaceReduce
Copy-style compacting creates copies of databases and then deletes the original databases after compacting completes, so extra disk space is required to make the database copies.
1S2S
h_copystyle
Select this option to use the Compact task to archive documents in databases configured for automatic archiving on this server.
1S2S3S4S
h_archive
Archives and deletes documents from databases with or without compacting the database. Databases must be configured for archiving.
1S2S3S4S
h_archiveOptions
Does a copy-style compaction, if selected. Your system must have the disk space to make the copy.
1S2S
h_adf
Does a copy-style compaction, if selected. Your system must have the disk space to make the copy.
1S2S
h_arh
Enables or disables database transaction logging.
1S2S3S4S5S6S
h_alog
Does a copy-style compaction, if selected. Your system must have the disk space to make the copy.
1S2S
h_aum
Basics
Task name:
Compactor
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
compact
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Database compactor
Task_monitorname
Description:
Compacts databases on the Domino server to free up disk space, changes database attributes and performs server-based database archiving.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
Categori_ze@
_Edit Document
Send Docu_ment
_Forward
_Move To Folder...
_Remove From Folder
Categori_ze
_Edit Document
Send Docu_ment
_Forward
_Move To Folder...
_Remove From Folder
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$$ArchiveNoCompact
$ArchiveNoCompact_O
$$ArchiveCompact
$ArchiveCompact_O
$$Revert
$Revert_O
$$Inplace
$Inplace_O
$$Inplace_1
$Inplace_1_O
$$Inplace_2
$Inplace_2_O
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$file
$file_O
$$filename
$filename_O
$$Space
$Space_O
$$SpacePercent
$SpacePercent_O
$$Discard
$Discard_O
$$Revert4
$Revert4_O
$$Revert5
$Revert5_O
$$Maximum
$Maximum_O
$$InplaceNoReduce
$InplaceNoReduce_O
$$InplaceReduce
$InplaceReduce_O
$$CopyStyle
$CopyStyle_O
$$Access
$Access_O
$$Ignore
$Ignore_O
$$advanced
$advanced_O
$$ADF
$ADF_O
$$ARH
$ARH_O
$$ALOG
$ALOG_O
$$AUM
$AUM_O
$$Archive
$Archive_O
$$archiveOptions
$archiveOptions_O
$Body
$V5ACTIONS
$ACTIONS
GIF89a
~X"P2
d0AW\Gf
MwR**u
^No6
H#1%)ITZ3
applet_router
Action
CLASS
notes:///./$FILENotesMail.class
icons
bgcolor
C0C0C0
NotesMail.class
NotesStrings.class
meterbg_1000.gif
meterbg_100.gif
meterbg_500.gif
MQListener.class
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
$FILE
NotesStrings.class
$FILE
meterbg_1000.gif
$FILE
meterbg_100.gif
$FILE
meterbg_500.gif
$FILE
NotesMail.class
$FILE
MQListener.class
$Comment
$NoBackgroundOverride
$Info
$$ScriptName
$Body
&Arial
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_fullscan(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_views(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
Option Public
'++LotusScript Development Environment:2:5:(Forward):0:1
'++LotusScript Development Environment:2:5:(Declarations):0:10
Public doc As NotesDocument
Lotus Product
V0.0n
task_fixup'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_file(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.file = "1"
doc.Display_Help = doc.h_filename(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_log(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_incremental(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_quick(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_views(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_delete(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_unlatch(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Index all databases | 1Index only this database or folder: | 2
Filename
Update this view only: | 1
Viewname
Basics
Views
All built views | -V
Update
Full text indexes: | 1
UpdateFTI
All | -FOnly those with frequency setting set to: | 1
Priority
Immediate | -HImmediate or Hourly | -MImmediate or Hourly or Daily | -L
Update
Rebuild
Rebuild: | 1
Full text indexes only | -XFull text indexes and additionally: | 1
RebuildViews
All used views (resource intensive) | -R
Create
All unused views | -C
Rebuild
SSites
Update database configurations: | 1
SearchSites
Incremental (faster) | -AFull (slower) | -B
Search Sites
Basics
GroupShadeHelp
Context Help
Specify whether the this task should run on all databases or only on a single database or folder on the current server.
1S2S
h_file
Enter the filename of a database or foldername containing databases you want to update.
For example: mail\pspilles.nsf"
1S2S3S4R5S6S
h_filename
Updates a specific view in a database. Use this option together with the Rebuild options to solve corruption problems in view indexes.
1S2S
h_view
Enter the name of the view you want to update in the specified database.
1S2S3S4S
h_viewname
Select this option to only update already built view indexes. Unused views which do not have an existing index will be ignored.
1S2S
h_views
Select this option to update full text indexes.
1S2S3S4S5S6S
h_update
Select whether you want to update all full text indexes or only those with a special update frequency.
1S2S3S4S
h_updateFTI
Updates Full text indexes based on their index frequency setting.
1S3S4S
h_priority
Select this option to rebuild full text indexes and/or view indexes.
1S3S2E4S
h_rebuild
Rebuilds unused views and a full text index.
Note: You need to specify a database filename in the 'Basics' tab for this option to work."
1S2S3S4R5S6S
h_create
Rebuilds full text indexes and all used views. Using this option is resource intensive, so use it as a last resort to solve corruption problems.
1S2S
h_rebuildViews
Select this option to rebuilds full-text indexes and/or views indexes. Use this to rebuild indexes that are corrupted.
1S2S
Select this option to update search-site database configurations.
1S3S4S
h_SSites
Updates only Server and Domain configuration documents of search site databases. Updates Full text indexes, including search site databases.
1S2S
h_SearchSites
Basics
Task name:
Update all (Database Indexer)
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
updall
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Index all
Task_monitorname
Description:
The Indexer updates all active views in databases when a user or server task updates any documents in these databases and updates full text indexes. Allows you to specify arguments that determine how the task works.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
Categori_ze
_Edit Document
Send Docu_ment
_Forward
_Move To Folder...
_Remove From Folder
Categori_ze
_Edit Document
Send Docu_ment
_Forward
_Move To Folder...
_Remove From Folder
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
]m[V=
Task_UIMode
$$hourly
$hourly_O
$$Highest
$Highest_O
$$Scheduled
$Scheduled_O
$$Scheduled_1
$Scheduled_1_O
$$High
$High_O
$$medium
$medium_O
$$low
$low_O
$$IncSearchSites
$IncSearchSites_O
$$FullSearchSites
$FullSearchSites_O
$Comment
$NoBackgroundOverride
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$file
$file_O
$$filename
$filename_O
$$View
$View_O
$$Viewname
$Viewname_O
$$views
$views_O
$$Update
$Update_O
$$UpdateFTI
$UpdateFTI_O
$$Priority
$Priority_O
$$Rebuild
$Rebuild_O
$$RebuildViews
$RebuildViews_O
$$Create
$Create_O
$$SSites
$SSites_O
$$SearchSites
$SearchSites_O
$Body
$V5ACTIONS
$ACTIONS
&Arial
'++LotusScript Development Environment:2:5:(Options):0:66
Option Public
'++LotusScript Development Environment:2:5:(Forward):0:1
'++LotusScript Development Environment:2:5:(Declarations):0:10
Public doc As NotesDocument
Lotus Product
task_http'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
V0.0+
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_restart(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_access(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_security(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_users(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Virtual servers on this machine | show virtual servers
Basics
GroupShadeHelp
Context Help
Refreshes the Web server with changes made to HTTP settings in the Server document, in the NOTES.INI, SERVLET.CNF and HTTPD.CNF files.
1S2S
h_restart
Displays information about file system protection set up on the machine and for virtual servers if you have virtual servers set up on the machine.
1S2S
h_access
Displays information about SSL and the server key ring file, including information about whether the server or virtual servers started SSL on the machine.
1S2S
h_security
Displays the names of users who have active HTTP server sessions.
1S2S3S4S
h_users
Displays a list of virtual servers running on the machine.
1S2S3S4S
h_vserver
Basics
Task name:
HTTP Web Server
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
HTTP Web Server
Task_monitorname
Description:
Enables the Domino server to act as a Web server so browser clients can access databases on the server.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
DTazK~
Task_UIMode
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$restart
$restart_O
$$Access
$Access_O
$$security
$security_O
$$users
$users_O
$$vserver
$vserver_O
$Body
&Arial
Lotus Product
task_pop3
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0R1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
POP3 Mail Server
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
POP3 Server
Task_monitorname
Description:
Enables the Domino server to support the Post Office Protocol Version 3 (POP3) for reading mail.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$Comment
$Info
$$Script_O
$$ScriptName
$Body
&Arial
Lotus Product
task_imap
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0RR1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
IMAP Mail Server
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
IMAP Server
Task_monitorname
Description:
Enables the Domino server to support the Internet Mail Access Protocol (IMAP) for reading mail.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$Comment
$Info
$$Script_O
$$ScriptName
$Body
&Arial
Lotus Product
task_ldap
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0R1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
LDAP Server
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
LDAP Server
Task_monitorname
Description:
Enables the Domino server to provide LDAP directory services to LDAP clients.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
c*IdXSG
Task_UIMode
$Comment
$Info
$$Script_O
$$ScriptName
$Body
GIF89a
x[&YQZ_
4QIoCaR
V?JhFZo
5= '%%
,*ahP
",-NT
GIF89a
<Ky/\
+j=$/2
#1U\I
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
$Info
$Body
GIF89a
EW<=G
h>YS)4
d4~co[w
hk]{r<
&Arial
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.execMode = ""
doc.Display_Help = doc.h_execute(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:74
'++LotusScript Development Environment:2:5:(Forward):0:1
'++LotusScript Development Environment:2:5:(Declarations):0:10
Public doc As NotesDocument
Lotus Product
V0.0a
task_amgr'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
V0.0+
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_schedule(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_status(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.execMode = ""
doc.Display_Help = doc.h_exec(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.exec = "1"
doc.Display_Help = doc.h_execMode(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_dcontrol(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_devents(0)
End Sub
Lotus Product
V0.0p
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_dloading(0)
End Sub
Lotus Product
V0.0p
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_dmemory(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_dperformance(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_dexecution(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_dscheduling(0)
End Sub
Lotus Product
V0.0p
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Displays the specified user's schedule on the server console. Use this to investige problems in the freetime data.
1S2S
h_show
Specify the name of the user you want to see scheduling data for.
1S2S3S4S
h_showuser
Immediately validates a free time database on a server for either all users or only a specified user.
1S2S3S4S
h_validate
Specify the name of the user you want to validate. If you want to validate ALL users, leave this field blank.
1S2S3S4S
h_valuser
Displays totals of reservations and appointments in the free time database.
1S2S3S4S
h_stats
Basics
Task name:
Schedule Manager
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
sched
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Schedule Manager
Task_monitorname
Description:
The Schedule Manager is required for calendaring and scheduling and returns meeting times and dates and available invitees.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$$valall
$valall_O
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$show
$show_O
$$showuser
$showuser_O
$$validate
$validate_O
$$valuser
$valuser_O
$$stats
$stats_O
$Body
&Arial
Lotus Product
task_billing'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0RR1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
Billing
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
billing
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Billing
Task_monitorname
Description:
The Billing server task collects all the generated billing information provided by the Domino server. This functionality is part of the Domino Enterprise Server.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
`,DW$
Task_UIMode
$Comment
$Info
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$Body
&Arial
Lotus Product
task_replica
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0R1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
Replicator
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
replica
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Replicator
Task_monitorname
Description:
The Replicator replicates databases with other Domino servers.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$Comment
$Info
$$Script_O
$$ScriptName
$Body
&Arial
'++LotusScript Development Environment:2:5:(Options):0:66
Option Public
'++LotusScript Development Environment:2:5:(Forward):0:1
'++LotusScript Development Environment:2:5:(Declarations):0:10
Public doc As NotesDocument
Lotus Product
V0.0n
task_router'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_stats(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_queues(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_compact(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_use(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Filename of the new shared mail database for new mail deliveries:
createPath
Create
Create
Create
Include and exclude mail files from shared mail
include
Include mail files | Reset -NeverExclude mail files | Set -Never
Mail file or foldername containing mail files:
includePath
Include
Include
Include
Link mail files to a shared mail database
Mailfile or foldername containing mail files:
linkMail
Filename of the shared mail database:
linkSharedMail
$Server_Build
1S2S
noCompact
Do not compact mailfile after linking | -Nocompact
$Server_Build
1S2S
Relink mail files to shared mail databases
Mailfile or foldername containing mail files:
reLinkMail
Filename of the shared mail database:
reLinkSharedMail
Relink
Unlink mail files or a shared mail database
Mailfile, foldername containing mail files or filename of the shared mail database:
unLink
Unlink
purgeSharedMail
Purge from shared mail database: | Collect
purgeForce
Reclaim the disk space | -Force
purgeSharedPath
purgeMail
Purge from a mail file: | Collect
purgeMailPath
purgeNoDel
Don't delete messages | -NoDelete
Purge
Purge
Purge
Restore a shared mail database
Current servername:
$Server_Name
restoreServer
Filename of the backup shared mail database:
restorePath
Select the backup file:
6S8S
restorePath
0R1S
restorePath
GIF89a
Restore
Restore
Restore
GroupShadeHelp
Basics
Context Help
Please select an option for managing shared mail on this Domino server.
1R2S3S4S
h_Action
Enter the filename of the new shared mail database. If necessary, you can also specify a path. For ease of management, it's best to keep all shared mail databases in the same directory.
1S2S
h_createPath
You may want to exclude certain mail files from using a shared mail database, or you may want to include certain mail files that you previously excluded.
1S2S
h_Include
Enter the filename of a mail file or foldername containing mail files.
For example: mail\pspilles.nsf"
1S2S3S4R5S6S7S8S
h_IncludePath
Enter the filename of a user mail file or a foldername containing mail files to be linked to the shared mail database.
For example: mail\dscheubi.nsf"
1S2S3S4R5S6S
h_linkMail
Set this option to prevent compaction of the mail file. The default is to automatically compact a mail file if more than five messages get linked to the shared mail database.
1S2S
h_noCompact
Enter the filename of the shared mail database.
For example: shared\sharemail.nsf
1S2S3S4R5S6S7S8S
h_linkSharedMail
Enter the name of a single user mail file or a foldername containing mail files to be relinked to the shared mail database.
For example: mail\rsmith.nsf"
1S2S3S4R5S6S
h_reLinkMail
Enter either the filename of a mail file or foldername containing mail files or the filename of the shared mail database to unlink.
1S2S3S4S
h_unLink
Select this option to purge messages from the shared mail database. (By default the Object Collect task automatically purges obsolete messages from the shared mail database at 2 AM)
1S2S
h_PurgeSharedMail
Enter the filename of the shared mail database.
For example: shared\sharemail.nsf
1S2S3S4R5S6S7S8S
h_purgeSharedPath
Caution: Be sure that all other mail files that store messages in the shared mail database are currently available online or you may inadvertently delete messages.
1S2S
h_PurgeForce
Select this option if you need to purge messages from a user's mail file.
1S2S3S4S
h_purgeMail
Enter the filename of a user's mail file.
For example: mail\ratzing.nsf
1S2S3S4R5S6S7S8S
h_PurgeMailPath
Select this option to test which documents would be deleted without actually deleting them.
1RS2S3S4Sh_PurgeNoDel
Enter the name of this domino server.
For example: Mail1\Acme
1S2S3S4R5S6S7S8S
h_restoreServer
Enter the filename of the backup shared mail database.
For example: backups\oldmail.nsf"
1S2S3S4R5S6S7S8S
h_restorePath
Basics
Task name:
Object Store Manager
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
object
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Object Store Manager
Task_monitorname
Description:
The Object Store Manager performs maintenance activities on databases and mail files that use shared mail.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$$path
$path_O
$$path_1
$path_1_O
$$create_path
$create_path_O
$$inc_path
$inc_path_O
$$restoreServer_1
$restoreServer_1_O
$$purgeSharedPath_1
$purgeSharedPath_1_O
$$Link
$Link_O
$$linkMail_1
$linkMail_1_O
$$Include_1
$Include_1_O
$$includePath_1
$includePath_1_O
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$$Action
$$Action_O
$$createPath
$createPath_O
$$Include
$Include_O
$$includePath
$includePath_O
$$linkMail
$linkMail_O
$$linkSharedMail
$linkSharedMail_O
$$noCompact
$noCompact_O
$$reLinkMail
$reLinkMail_O
$$reLinkSharedMail
$reLinkSharedMail_O
$$unLink
$unLink_O
$$PurgeSharedMail
$PurgeSharedMail_O
$$PurgeForce
$PurgeForce_O
$$purgeSharedPath
$purgeSharedPath_O
$$PurgeMail
$PurgeMail_O
$$purgeMailPath
$purgeMailPath_O
$$purgeNoDel
$purgeNoDel_O
$$restoreServer
$restoreServer_O
$$restorePath
$restorePath_O
$Body
&Arial
'++LotusScript Development Environment:2:5:(Options):0:66
Option Public
'++LotusScript Development Environment:2:5:(Forward):0:1
'++LotusScript Development Environment:2:5:(Declarations):0:10
Public doc As NotesDocument
Lotus Product
V0.0n
task_web'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_refresh(0)
End Sub
Lotus Product
OBJECT
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Prefix
Tell
Task_filename
1S2E2S3S4S5S6S
Basics
refresh
Prefix
refresh
0RR1S2E2S5S6S8S9S10S11S12S14S16S
Command
Basics
0RR1S2S
$Task_TellCmd
Command
0RR1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Task_UI
Task_UI
Basics
refresh
Refresh Web configuration changes | Refresh
Basics
GroupShadeHelp
Context Help
Refreshes all the Web Navigator global settings. Use this command if you make any changes to the server document while the Web server task is running.
1S2S
h_refresh
Basics
Task name:
Web Retriever
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
WEB Retriever
Task_monitorname
Description:
Implements the HTTP protocol on the Domino server to retrieve Web pages and convert them into Notes documents.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
\skV@
Task_UIMode
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$refresh
$refresh_O
$Body
&Arial
task_diiop
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0R1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
DIIOP Server
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
diiop
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
DIIOP Server
Task_monitorname
Description:
DIIOP (Domino Objects over IIOP) enables the Domino server to act as a CORBA server for IIOP clients.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$Comment
$Info
$$ScriptName
$Body
Users Page 1
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
$TITLE
$Comment
$FrameSet
$Flags
GIF89a
EW<=G
h>YS)4
d4~co[w
hk]{r<
&Arial
'++LotusScript Development Environment:2:5:(Options):0:66
Option Public
'++LotusScript Development Environment:2:5:(Forward):0:1
'++LotusScript Development Environment:2:5:(Declarations):0:10
Public doc As NotesDocument
Lotus Product
V0.0n
task_nntp'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_new(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.new = "newgroup"
doc.Display_Help = doc.h_newgroup(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_delete(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.delete = "newsgroup delete"
doc.Display_Help = doc.h_delgroup(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_reset(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.reset = "reset"
doc.Display_Help = doc.h_server(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_config(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Start | start inbound transportStop | stop inbound transport
inconv
0R1S
intrans
0R1S
Reset selections
Inbound
1S2S
Delivery Report Task:
drtask
Start | start DRTASKStop | stop DRTASK
drtask
Reset selection
DReport
Start/Stop...
GroupShadeHelp
Context Help
Displays the current version number of the MTA on the server console.
1S2S3S4S
h_version
Displays the current MTA configuration on the Notes server console. Note that this only occurs when the Loglevel is 'Informational' or above.
1S2S
h_config
This reloads the NOTES.INI setting that applies to the MTA and any changes in Public Address Book documents that apply to the MTA.
1S2S
h_refresh
Forces the SMTP MTA to compact the file SMTP.BOX
1S2S3S4S5S6S
h_compact
'All' will start or stop all MTA subtasks.
'Select...' allows you to pick specific tasks to start or stop.
1S2S3S4R5S6S7S8S
h_mode
Starts or stops all MTA subtasks:
OMSGCNV, OSESCTL, IMSGCNV, ISESCTL and DRTask."
1S2S3S4R5S6S
h_all
Starts or stops both Outbound tasks:
OMSGCNV, OSESCTL.
1S2S3S4R5S2E6S7S8S
h_out
Starts or stops the OMSGCNV task.
1S2S3S4S5S6S
h_outconv
Starts or stops the OSESCTL task.
1S2S3S4S5S6S
h_outtrans
Starts or stops both Inbound tasks:
IMSGCNV, ISESCTL.
1S2S3S4R5S6S7S8S
Starts or stops the IMSGCNV task.
1S2S3S4S5S6S
h_inconv
Starts or stops the ISESCTL task.
1S2S3S4S5S6S
h_intrans
Starts or stops the DRT task.
1S2S3S4S5S6S
h_drtask
Basics
Task name:
SMTP/MIME MTA (R4 only)
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)
Task filename:
SMTPMTA
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task Monitor Name:
SMTPMTA
Task_monitorname
Description:
The Domino SMTP MTA (message transfer agent) provides SMTP services for R4-based Domino servers. For R5-based Domino servers, this functionality has been replaced by the router task.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that task
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
x6m[ t_
Task_UIMode
$$new
$new_O
$$newgroup
$newgroup_O
$$delete
$delete_O
$$delgroup
$delgroup_O
$$reset
$reset_O
$$server
$server_O
$$groups
$groups_O
$$selected
$selected_O
$$allExit
$allExit_O
$$logfile
$logfile_O
$$dbAllNoexit
$dbAllNoexit_O
$$dbSelected
$dbSelected_O
$$dbAllExit
$dbAllExit_O
$$all_1
$all_1_O
$$all_1_1
$all_1_1_O
$$outbound
$outbound_O
$$inbound
$inbound_O
$$outbound_1
$outbound_1_O
$$outbound_2
$outbound_2_O
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$version
$version_O
$$config
$config_O
$$refresh
$refresh_O
$$compact
$compact_O
$$Mode
$Mode_O
$$all
$all_O
$$out
$out_O
$$outconv
$outconv_O
$$outtrans
$outtrans_O
$in_O
$$inconv
$inconv_O
$$intrans
$intrans_O
$$drtask
$drtask_O
$Body
Take Notice
STR_HELP_HELP
Domino console command:
iSTR_PAUSE
STR_SERVERUP
Show Database
iSTR_ALERTITLE
STR_NUMOFCOMMANDS
STR_STATSAUTH
STR_HCORR
iERR_STR_ALERTSAUTH
Corruption
Domino HTTP Commands
LineNumberTable
iSTR_HELP_SHOW_PORT
iSTR_TOTAL
iSTR_PAUSE_CHECKBOX
STR_LEGEND
STR_HELP_ROUTE
iSTR_ERROR
NotesStrings
STR_HELP_SHOW_TASK
msgid
iSTR_SEND_BUTTON
iSTR_HELP_SET_SECURE
Select One
Broadcast
iSTR_NOKEYWORDS
STR_HELP_BROADCAST
$Search completed, no keywords found.
ERR_STR_UNABLE
STR_HELP_LOAD
Show Server
iSTR_INVESTIGATE
iSTR_HELP_ROUTE
Warning
STR_HOURS
+Statistics Applet: check your authorization
ERR_STR_IOEXCEPTION
Unable
Security
iSTR_SWAP
iSTR_VALIDKEYS
STR_HUNABLE
STR_LASTUPDATE
iERR_STR_UNABLE
iSTR_HELP_DROP
Highlight Next Unable
STR_HUNK
(unit of measure is bytes)
STR_REQUESTCHART
iSTR_DISKFREE
Starting...
UnknownServerException:
Next Chart -
STR_HELP_TELL
STR_HELP_SHOW_MEMORY
Last updated:
iSTR_HELP_EXIT
(I)Ljava/lang/String;
STR_TOTALPEAK
iMSG_STR_UPDATEMAIL
LNotesStrings;
STR_HELP_SET_SECURE
STR_HELP_NONE
Highlight Next Error
iSTR_LASTUPDATE
iSTR_COMMANDCHART
iMSG_STR_LOADING
Exceptions
Updating statistics...
iSTR_CORR
STR_SEARCHCOMPLETED
Investigate
Retrieving memory statistics...
STR_SEARCHING
Memory total (bytes)
STR_HELP_SHOW_PORT
STR_HELP_SHOW_PERF
iSTR_IS
STR_HELP_SET_CONFIG
STR_HELP_LABEL
Show Performance
java/lang/Object
NotesStrings.java
iERR_STR_SRV_EXCEPTION
<init>
Normal
iMSG_STR_UPDATESTATS
STR_FAIL
'Server Applet: check your authorization
iSTR_RESETBUTTON
getString
iSTR_HERROR
DSearch completed. (single-click on lights to view specific keywords)
iSTR_STARTING
LocalVariableTable
iSTR_HELP_SHOW_SERVER
STR_WARN
iSTR_HELP_LABEL
ERR_STR_INTERRUPT
Memory free (bytes)
(values include swap space)
ERR_STR_SERVERAUTH
iSTR_HELP_SHOW_DISK
Tell
Load
MSG_STR_UPDATESTATS
STR_RESETBUTTON
Memory
iSTR_LAST
STR_UNABLE
STR_COMMAND_LABEL
iSTR_FREE
Stopping...
STR_NEXTCHART
STR_HELP_SHOW_DATABASE
iSTR_HSEC
Search completed.
STR_STOPPING
iSTR_RESUME
ConstantValue
iSTR_DISKSIZE
STR_BYTES
Unknown
iSTR_NOROUTER
iSTR_USED
ERR_STR_AUTH
Pausing...
ERR_STR_SRV_EXCEPTION
iSTR_LEGEND
Route
iSTR_SERVERUP
iSTR_HELP_SHOW_CONFIG
iSTR_HELP_SET_CONFIG
SourceFile
STR_SEND_BUTTON
Failure
Show Directory
Statistics Applet:
STR_STATS
% used
Alert Message Center
STR_ALERTITLE
iMSG_STR_COMPLETED
STR_IS
iSTR_HCORR
STR_NORMAL
Show Disk
Drop
STR_COMPLETED
iSTR_LIVE_CHECKBOX
STR_HFAIL
You are not authorized
Show Task
Show Schedule
LocalVariables
STR_HWARN
Live console
iSTR_HELP_SHOW_PERF
iSTR_HELP_HELP
STR_MEMORY
Highlight Next Corruption
STR_PAUSE
Show Config
STR_SEC
iSTR_STATSAUTH
STR_COMMANDCHART
Highlight Next Unknown
STR_SEARCHCOMPLETEDMAC
STR_TOTAL
STR_INVESTIGATE
iSTR_HOURS
iSTR_HUNK
Domino HTTP Requests
STR_ERROR
(since server startup)
STR_VALIDKEYS
STR_HELP_DROP
Show Port
iSTR_NEXTCHART
iSTR_HELP_SHOW_MEMORY
Completed
STR_HELP_SHOW_USERS
iSTR_SEARCHCOMPLETEDMAC
iSTR_HELP_LOAD
STR_LIVE_CHECKBOX
STR_HELP_EXIT
Set Secure
ERR_STR_ALERTSAUTH
Disk space free (bytes)
STR_HERROR
Updating mail statistics...
Show Memory
MSG_STR_LOADING
ERR_STR_BAD_URL
iERR_STR_INTERRUPT
Commands...
iSTR_FAIL
iSTR_HELP_SHOW_TASK
ERR_STR_SERVER
iSTR_HELP_TELL
Disk space size (bytes)
STR_SWAP
iSTR_WARN
iSTR_TOTALPEAK
Set Config
iSTR_SEC
Pause output
iERR_STR_IOEXCEPTION
iSTR_HELP_NONE
STR_RESUME
STR_DISKFREE
Highlight Next Security
STR_HELP_SHOW_SERVER
iSTR_COMPLETED
STR_UNK
STR_NOKEYWORDS
iERR_STR_SERVER
iSTR_SEARCHING
iSTR_HUNABLE
STR_PAUSE_CHECKBOX
STR_RETRIEVING
iERR_STR_SERVERAUTH
iSTR_REQUESTCHART
iSTR_SEARCHCOMPLETED
iSTR_STOPPING
iERR_STR_BAD_URL
STR_CORR
iSTR_NUMOFCOMMANDS
STR_HELP_SHOW_CONFIG
Error
STR_TAKENOTICE
STR_HELP_SHOW_DISK
STR_HELP_SHOW_DIR
iERR_STR_AUTH
Server Applet:
Highlight Next Warning
iSTR_HELP_SHOW_USERS
*Valid keys - Home, End, Page Up, Page Down
iSTR_NORMAL
Update
iSTR_RETRIEVING
iSTR_BYTES
# of Commands
Resuming...
Legend
Show Users
Ljava/lang/String;
iSTR_HELP_SHOW_DIR
STR_STARTING
iSTR_TAKENOTICE
iSTR_HELP_SHOW_DATABASE
Malformed URL
iSTR_HELP_SHOW_SCHEDULE
iSTR_MEMORY
,Mail statistics not available; check Router.
IOException:
STR_HELP_SHOW_SCHEDULE
iSTR_STATS
Retrieving disk statistics
iSTR_HELP_BROADCAST
Unable to complete your request
hour(s)
STR_LAST
MSG_STR_COMPLETED
9Unable to complete your request; check your authorization
Write a Replication Event Log record immediately | log
The Cluster Replicator should | 1
pause
Pause | pause
retry
Retry all failed replications immediately | retry
resume
Resume | resume
Basics
Dump internal context for: | 1
dumpAll
Everything | Dump
dumpMates
All known cluster mates | dump server
dumpDB
All databases that have failed to replicate | dump retry
GroupShadeHelp
Context Help
Checks for cluster configuration changes in CLDBDIR immediately, instead of waiting for the next config interval.
1S2S3S4S
h_config
Immediately generates a Replication Event Log record in the server log (LOG.NSF) about all cluster replications waiting for retry, instead of waiting for the next log interval.
1S2S
h_log
Select this option to pause, retry or resume the cluster replicator.
1S2S3S4S5S6S
h_run
Pauses all instances of the Cluster Replicator. CLREPL will continue to respond to TELL commands, but it will not replicate, log any events, or check for config changes in CLDBDIR.
1S2S
h_pause
Retries all failed replications immediately, instead of waiting for the next retry interval for each failed replication.
1S2S3S4S
h_retry
Resumes all instances of the Cluster Replicator to normal operation.
1S2S3S4S5S6S
h_resume
Select this option to force the Cluster Replicator to dump internal context information.
1S2S3S4S5S6S
h_dump
Dump all internal context information. This command can generate a significant amount of information, and should only be used when you're looking for specific information.
1S2S3S4S
h_dumpAll
Forces the Cluster Replicator to dump its internal context for all known cluster mates. Information dumped will include Last Error received when attempting to connect with cluster mates.
1S2S
h_dumpMates
Dumps internal context for all databases that have failed to replicate and are awaiting retry.
1S2S3S4S5S6S
h_dumpDB
Basics
Task name:
Cluster Replicator
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
clrepl
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Cluster Replicator
Task_monitorname
Description:
A cluster component which keeps database replicas within a cluster synchronized using event-driven replication. Part of the Domino Enterprise Server.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$$esume
$esume_O
$$dumpMode
$dumpMode_O
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$config
$config_O
$$log
$log_O
$$run
$run_O
$$pause
$pause_O
$$retry
$retry_O
$$resume
$resume_O
$$dump
$dump_O
$$dumpAll
$dumpAll_O
$$dumpMates
$dumpMates_O
$$dumpDB
$dumpDB_O
$Body
&Arial
Lotus Product
OBJECT
task_cldbdir
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0RR1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
Cluster Database Directory Manager
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
cldbdir
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Cluster Directory
Task_monitorname
Description:
A cluster component that updates the Cluster Database Directory and manages databases with cluster-specific attributes. Part of the Domino Enterprise Server.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$Comment
$Info
$$Script_O
$$ScriptName
$Body
&Arial
Lotus Product
task_mtc
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0R1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
Message Tracking Collector (MTC)
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
MT Collector
Task_monitorname
Description:
The Message Tracking Collector maintains the mtstore.nsf database and is required to be able to perform message tracking.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
G"sD5
Task_UIMode
$Comment
$Info
$$Script_O
$$ScriptName
$Body
&Arial
task_ispy
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0RR1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
runjava ISpy
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Task_monitorname
Description:
The ISpy server task monitors mail routing and probes Internet ports on the Domino server for high availability.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$Comment
$Info
$$ScriptName
$Body
&Arial
'++LotusScript Development Environment:2:5:(Options):0:66
Option Public
'++LotusScript Development Environment:2:5:(Forward):0:1
'++LotusScript Development Environment:2:5:(Declarations):0:10
Public doc As NotesDocument
Lotus Product
task_collector'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_collect(0)
End Sub
Lotus Product
V0.0p
Command
Load
Task_filename
2S3S4S
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Prefix
Tell collector
1S2E2S
Basics
collect
Prefix
collect
0R1S2E2S5S6S8S9S10S11S12S14S
Command
Basics
0RR1S2S
$Task_TellCmd
Command
0RR1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Task_UI
Task_UI
Basics
collect
Collect and generate statistic reports | collect
Basics
GroupShadeHelp
Context Help
Runs a statistics collection to all the servers specified and generates statistic reports.
1S2S
h_collect
Basics
Task name:
Collector
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
collect
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Statistics Collector
Task_monitorname
Description:
The Statistics Collector gathers Domino server statistics and creates statistic reports.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
Categori_ze
_Edit Document
Send Docu_ment
_Forward
_Move To Folder...
_Remove From Folder
Categori_ze
_Edit Document
Send Docu_ment
_Forward
_Move To Folder...
_Remove From Folder
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
2V%<+
Task_UIMode
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$collect
$collect_O
$Body
$V5ACTIONS
$ACTIONS
'++LotusScript Development Environment:2:5:(Options):0:74
Option Public
Option Declare
'++LotusScript Development Environment:2:5:(Forward):0:1
'++LotusScript Development Environment:2:5:(Declarations):0:2
Lotus Product
$debugger'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Databases used by this Administration Server | show databases
Other
GroupShadeHelp
Context Help
Processes all new and modified immediate, interval, daily, and delayed requests. This command doesn't override timed requests execution time.
1S2S3S4S
h_all
Processes all new requests.
1S2S3S4S5S6S7S8S
h_new
Processes 'All new and modified daily requests to update Person documents in the Domino Directory' and any outstanding 'Rename Person in Unread List' requests.
1S2S
h_daily
Processes all new and modified delayed requests. These are requests that are usually carried out according to the 'Start executing on' and 'Start executing at' settings in the Server document.
1S2S
h_delayed
Processes all immediate requests and all requests that are usually processed according to the Interval setting in the Server document.
1S2S3S4S
h_interval
Processes all new and modified requests to update Person documents in the Domino Directory.
1S2S3S4S5S6S
h_people
Processes all new and modified requests to delete unlinked mail files.
1S2S3S4S5S6S
h_time
Displays the databases that this server updates, where it updates Reader and Author fields and databases that don't have an administration server assigned to them.
1S2S
h_sdatabases
Basics
Task name:
Administration Process
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
adminp
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Admin Process
Task_monitorname
Description:
The Administration Process automates Name management, Domino Directory maintenance and database distribution.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$Help
$$$Focus
$$Focus_O
$$all_1
$all_1_O
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$all
$all_O
$$new
$new_O
$$daily
$daily_O
$$delayed
$delayed_O
$$interval
$interval_O
$$people
$people_O
$$time
$time_O
$$sdatabases
$sdatabases_O
$Body
'++LotusScript Development Environment:2:5:(Options):0:74
'++LotusScript Development Environment:2:5:(Forward):0:1
'++LotusScript Development Environment:2:5:(Declarations):0:2
Lotus Product
OBJECT
GroupShadeHelp'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Queryclose(Source As Notesuidocument, Continue As Variant)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Queryclose From Source Call Queryclose
End Sub
'++LotusScript Development Environment:2:2:Queryclose:1:12
Sub Queryclose(Source As Notesuidocument, Continue As Variant)
CN=Rob Shaver/O=IrisCN=Ryan Jansen/O=IrisCN=Thomas Gumz/O=IrisCN=Lotus Notes Template Development/O=Lotus NotesExperienced Users Primer|Experienced Users PrimerOnly using this frameset to get page window title to show up in client#4C#########
You can start the MTA to display diagnostics only.
Information will be written to the server console and
to the server's logfile and will appear in these views:
- Miscellaneous Events
- Mail Routing Events
diagnostics
Run in diagnostics mode only; then exit | diagnostics
Diagnostics
compact
Compact work queue database and mailbox | compact
refresh
Refresh cc:Mail MTA settings: | refresh
refreshOpt
Routing tables | routingConfiguration documents | configBoth | all
Basics
Use these options to immediately perform Directory synchronization and cc:Mail Bulletin Board conversion between Lotus Notes and cc:Mail.
Perform:
applyADE
Directory synchronization (Apply ADE) | Applyade
applyBBX
Bulletin Board conversion (Apply BBX) | Applybbx
ADE & Bulletin boards
P.O.Name:
POName
Call Post Office via: | call
Calldata
P.O.Name above | 1Network address: | 2
network
Request
Request all cc:Mail directory data (Request) | request
Synch
Send all Domino directory data (Synch) | synch
Update
Send Domino user name updates only (Update) | update
Groups
Send Domino group updates only (Groups) | groups
groupdata
To P.O.Name above| 1To ##all | ##all
Advanced
GroupShadeHelp
Context Help
Use this command to see a summary of the settings specified in the Server, cc:Mail PO Server, Connection documents and to monitor Router behavior. Make sure the MTA is not running already.
1S2S3S4S
h_diagnostics
Deletes unusable space in the work queue database (CCMCWQ.BOX) and the mailbox (CCMAIL.BOX) on the cc:Mail MTA server and frees that space for other uses.
1RS2S3S4S5S6Sh_compact
Refreshes the MTA with the most recent changes in the MTA configuration documents. Note: You must restart the MTA for changes in the Protocol field in the Server document.
1S2S3S4S
h_refresh
Configuration: Refreshes from the Server document and from other configuration document. Routing tables: Causes the Notes Router to rebuild its routing tables.
1RS2S3S4S5S6Sh_refreshOpt
Please enter the cc:Mail Post Office name used for all operations on this tab.
1R3S5S6S
h_poname
Initiates a call to the post office you specify. You must enter the post office name exactly as it appears in the cc:Mail Post Office Server document.
1S2S3S4S
h_call
Either use the specified cc:Mail Post Office Name or supply a valid network adress.
1S2S3S4S5S6S
h_calldata
For example:
130.103.38.12 (TCP/IP address) or"
2.2608cafe38e (SPX address)."
1R2S3S4R5R6S7S8R9RS10S11S12S
h_network
The ADE message this command generates is called a CCMSYNCH.REQ message. To transfer the message to cc:Mail, call the cc:Mail PO you specified or wait for cc:Mail Router to call the cc:Mail MTA.
1S2S
h_request
The ADE message this command generates is called a CCMSYNCH message. To transfer the message to cc:Mail, call the cc:Mail PO you specified or wait for cc:Mail Router to call the cc:Mail MTA.
1S2S
h_synch
Sends all the Domino user names that have been added to, changed in, or deleted from the source Directory(s) since the last Update command was issued, to update the specified cc:Mail PO.
1S2S
h_update
Sends all the Domino group names that have been added to, changed in, or deleted from the source Directory(s) since the last Update command was issued, to update the specified cc:Mail PO.
1S2S
h_groups
Specify ##all if you want the message to be delivered to all the cc:Mail post offices to which the cc:Mail MTA is connected, either directly or indirectly.
1RS2S3S4Sh_groupdata
Processes the next message from cc:Mail immediately, if any messages containing cc:Mail PO directory information are waiting in the work queue. Use this command to override the polling interval specified for Directory Conversion in the Server document.
1S2S3S4S
h_applyADE
Synchronizes new, changed and deleted messages between the Notes bulletin board database and cc:Mail bulletin boards. Use this command to override the polling interval you specified for Bulletin Board Conversion in the Server document.
1R2S3S4S
h_applyBBX
Basics
Task name:
cc:Mail MTA
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
ccmta
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
CCMTA
Task_monitorname
Description:
The cc:Mail MTA runs as a collection of Domino server tasks that control the exchange of mail messages and user information between Lotus Notes and Lotus cc:Mail.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$Help
$$$Focus
$$Focus_O
$$all_1
$all_1_O
$$new
$new_O
$$daily
$daily_O
$$delayed
$delayed_O
$$interval
$interval_O
$$people
$people_O
$$time
$time_O
$$sdatabases
$sdatabases_O
$$all
$all_O
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$diagnostics
$diagnostics_O
$$compact
$compact_O
$$refresh
$refresh_O
$$refreshOpt
$refreshOpt_O
$$applyADE
$applyADE_O
$$applyBBX
$applyBBX_O
$$POName
$POName_O
$$Call
$Call_O
$$Calldata
$Calldata_O
$$network
$network_O
$$Request
$Request_O
$$Synch
$Synch_O
$$Update
$Update_O
$$groups
$groups_O
$$groupdata
$groupdata_O
$Body
&Arial
task_dircat'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
V0.0+
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0RR1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
Directory Catalog Aggregator
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
dircat
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Directory Cataloger
Task_monitorname
Description:
The Directory Catalog Aggregator replicates entries from the Domino directories configured in it and combines the entries into the source Directory Catalog.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$Comment
$Info
$$ScriptName
$$FormScript
$$$FormScript_O
$Body
GIF89a
?_?__
`!b`1
7`^///?
?b___
`bOOO
`<b!R
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Mka7D
$ImagesWide
$ImagesHigh
$ImagesColorize
$ImageData
$ImageNames
&Arial
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
Print "focus"
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
Declare Sub Exiting(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
On Event Exiting From Source Call Exiting
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
Print "load"
doc.Display_Help = "booboo" 'doc.h_all(0)
End Sub
'++LotusScript Development Environment:2:2:Exiting:1:12
Sub Exiting(Source As Field)
Print "Exit"
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_new(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_daily(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_delayed(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_interval(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_people(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_time(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_sdatabases(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_all(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_all(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_all(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:74
Option Declare
'++LotusScript Development Environment:2:5:(Forward):0:1
'++LotusScript Development Environment:2:5:(Declarations):0:10
Public doc As NotesDocument
Lotus Product
OBJECT
task_x400mta'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_showQueue(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_showVersion(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_showMsg(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.showMsg = "Show messages"
doc.Display_Help = doc.h_showMsgQueue(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_route(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Route = "Route"
doc.Display_Help = doc.h_RouteQueue(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_moveMsg(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.moveMsg = "Movemsg"
doc.Display_Help = doc.h_MoveSourceQueue(0)
End Sub
Lotus Product
OBJECT
[ t 3
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.moveMsg = "Movemsg"
doc.Display_Help = doc.h_MoveMsgID(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.moveMsg = "Movemsg"
doc.Display_Help = doc.h_MoveDestQueue(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_purge(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_deleteMsg(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_DeleteQueue(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_DeleteMsgID(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_loglevel(0)
End Sub
Lotus Product
OBJECT
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_x4loglevel(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
Sub Entering(Source As Field)
doc.Display_Help = doc.h_apitrace(0)
End Sub
Lotus Product
'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Entering(Source As Field)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As FIELD
Set Source = Bind(Objectname_)
On Event Entering From Source Call Entering
End Sub
'++LotusScript Development Environment:2:2:Entering:1:12
API Trace Log | ApitraceField Engineer's Log | FelogRAM Recorder Log | RamService Record Log | Srl---<nothing>--- |
Advanced
GroupShadeHelp
Context Help
Displays the hierarchical names of all the adjacent MTAs and MT client queues that the X.400 MTA recognizes and how many messages are queued up to each entity.
1S2S3S4S
h_showQueue
Displays the version information for the X.400 MTA.
1S2S3S4S5S6S
h_showVersion
Displays all the message objects in a queue. The information displays at the Domino server console and recorded in MADMAN.NSF.
1S2S3S4S5S6S
h_showMsg
The hierarchical name of the message queue.
For example:"
/CN=x400 server/O=x400/L=mail.box
1S2S3S4S5S6R7S8S9S10R11S12S13S14Sh_showMsgQueue
Starts an immediate association to an adjacent X.400 MTA.
1S2S3S4S5S6S7S8S
h_Route
The hierarchical name of an adjacent X.400 MTA.
For example:"
/CN=x400 server/O=x400"
1S2S3S4S5S6R7S8S9S10R11S12S13S14Sh_RouteQueue
Moves a message object from one mailbox queue to another. If the destination queue is not specified, then DEAD.BOX is used as the destination MT Client queue.
The hierarchical name of the queue to move the message to.
For example:"
/CN=x400 server/O=x400/L=dead.box
1S2S3S4S5S6R7S8S9S10R11S12Sh_MoveDestQueue
Cleans out the contents of the DEAD.BOX queue. Whenever possible you should move a message object instead of deleting it. You can view details of deleting the purged message using the Purged Messages view in MADMAN.NSF.
1S2S
h_Purge
Removes the selected message from the specified queue.
1S2S3S4S5S6S7S8S
h_DeleteMsg
The hierarchical name of the adjacent MTA.
For example:"
/cn=x400 server/o=x400"
1S2S3S4S5S6R7S8S9S10R11S12S13S14Sh_DeleteQueue
The identifier of the message object to be deleted.
For example:"
06000001"
1S2S3S4S5S6R7S8S9S10R11S12S13S14Sh_DeleteMsgID
Sets the severity of the messages that the X.400 MTA writes to the Notes Log (LOG.NSF). Use Informational or Verbose to collect more detailed information for diagnostic purposes.
1S2S3S4S
h_Loglevel
Selects the severity of the messages that are written to the Field Engineer's Log. Use Informational or Verbose to collect more detailed information for diagnostic purposes.
1S2S3S4S
h_x4loglevel
This command causes the X.400 MTA to record the API trace at the ASCI (ASCE/Presentation Service), TSI (Transport Service), or NSI (Network Service) Interfaces.
1S2S3S4S
h_apiTrace
Dump the contents of the appropriate diagnostic source to X400LOG.NSF. The resultant dumped log can be found in the Dumped Files view of the X.400 Log.
1S2S3S4S
h_dump
Basics
Task name:
X.400 MTA
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
x400mta
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
X.400 MTA
Task_monitorname
Description:
The X.400 MTA enables X.400 services and can provide connectivity to and from SMTP and cc:Mail environments by using the cc:Mail MTA and/or the SMTP/MIME MTA.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Decodes all binary files that have not been translated and stays available to translate any new binary files as they are detected.
1S2S
h_all
Decodes only those binary files you have tagged.
1S2S3S4S5S6S
h_selected
Decodes all binary files only once, translates them as appropriate, then exits.
1S2S3S4S
h_allExit
Specify the filename of the log database you want to decode.
1S2S3S4S
h_logfile
Decodes all existing binary files for the particular database and stays available to translate any new binary files as they are detected.
1S2S
h_dbAllNoExit
Decodes only those binary files in the particular database that you select.
1S2S3S4S
h_dbSelected
Decodes all binary files for the particular database only once, translats them as appropriate, then exits.
1S2S3S4S
h_dbAllExit
Basics
Task name:
X.400 MTA: Binary Log Decoder
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
x4dcode
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
X.400 dcode
Task_monitorname
Description:
The X.400 Binary Log Decoder translates binary file attachments such as the RAM Recorder, Termination, and Service Record logs and posts the translated readable text as Response documents to the original dumped file.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz
Task_description
Has "LOAD" UI:
Task_hasLoadUI
No | 0Yes | 1
Task_hasLoadUI
Task_hasLoadUI
$Task_LoadCmd
$Task_LoadCmd
$Task_LoadCmd
Has "TELL" UI:
Task_hasTellUI
No | 0Yes | 1
Task_hasTellUI
$Task_TellCmd
$Task_TellCmd
$Task_TellCmd
O=Lotus Notes
O=Lotus Notes
PURSAFO
|.:#U
O=Lotus Notes
CN=Lotus Notes Template Development/O=Lotus Notes
PURSAFO
Task_UIMode
$$file
$file_O
$$filename
$filename_O
$$views
$views_O
$$quick
$quick_O
$$incremental
$incremental_O
$$unlatch
$unlatch_O
$$delete
$delete_O
$$fullscan
$fullscan_O
$$journal
$journal_O
$$log
$log_O
$$noExit
$noExit_O
$$allNoExit
$allNoExit_O
$$all_1
$all_1_O
$$all_dbExit
$all_dbExit_O
$$AlldbNoexit
$AlldbNoexit_O
$$all_dbExit_2
$all_dbExit_2_O
$$dbAllX
$dbAllX_O
$Comment
$Info
$SubForms
$Script
$$Script_O
$$ScriptName
$$FormScript
$$$FormScript_O
$$all
$all_O
$$selected
$selected_O
$$allExit
$allExit_O
$$logfile
$logfile_O
$$dbAllNoexit
$dbAllNoexit_O
$$dbSelected
$dbSelected_O
$$dbAllExit
$dbAllExit_O
$Body
&Arial
task_domidx'++LotusScript Development Environment:2:5:(Options):0:66
'++LotusScript Development Environment:2:5:(Forward):0:1
Declare Sub Postopen(Source As Notesuidocument)
'++LotusScript Development Environment:2:5:(Declarations):0:2
'++LotusScript Development Environment:2:2:BindEvents:1:129
Private Sub BindEvents(Byval Objectname_ As String)
Static Source As NOTESUIDOCUMENT
Set Source = Bind(Objectname_)
On Event Postopen From Source Call Postopen
End Sub
'++LotusScript Development Environment:2:2:Postopen:1:12
Sub Postopen(Source As Notesuidocument)
Set doc = source.Document
End Sub
Lotus Product
Command
$Task_LoadCmd
Command
0RR1S2S3S
Parse_Load
Parse_Loadz
Parse_Load
Command
$Task_TellCmd
Command
0RR1S2S3S
Parse_Tell
Parse_Tellz
Parse_Tell
Basics
Task name:
Domain Indexer
Task_name
0S0E
Task_name
You need to enter the add-in task name.
0S0E
Task_nameFriendly name of the task, such as Agent Manager (not AMgr)z
Task_name
Task filename:
domidx
Task_filename
0S0E
Task_filename
You need to enter the filename of the task{
0S0E
Task_filenameThe filename of the task without platform suffix and .EXE (such as "amgr")
Task_filename
Task Monitor Name:
Domain Indexer
Task_monitorname
Description:
The Domain Indexer full-text indexes all specified Domino databases and file systems in your domain into a central Domain Index. The Domain Indexer task runs only on Domain Catalog servers.
Task_description^
0S0E
Task_description
You need to enter the description of the task
0S0E
Task_descriptionThe help description to be displayed for that taskz