home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: sci.electronics
- Path: sparky!uunet!gumby!wupost!ukma!news
- From: msunde01@mik.uky.edu (Mark Underwood)
- Subject: Re: 486 CPU KOOLERS FOR SALE
- References: <1992Nov1.142745.9257@news.clarkson.edu>
- Nntp-Posting-Host: nx14.mik.uky.edu
- Message-ID: <1992Nov6.200831.28110@ms.uky.edu>
- Reply-To: msunde01@mik.uky.edu
- Organization: University Of Kentucky, Dept. of Math Sciences
- Sender: news@ms.uky.edu (USENET News System)
- Date: Fri, 6 Nov 1992 20:08:30 GMT
- Lines: 27
-
- In article <1992Nov1.142745.9257@news.clarkson.edu>
- faruque@sun.soe.clarkson.edu (Abdullah Faruque,334CH,3752,2654247) writes:
- >
- > Do not worry about the weight and torque. I installed one of these
- > unit (which I purched from Jeff) in my vertical case. There is no way
- > it can fall down or cause any problem. I was also concerned about this
- > before buying it , but now I am very happy with this unit. You have to
- > first remove the CPU, then put the base over the socket and then put
- > back the CPU. After that install the heatsink and fan unit over the
- > CPU by using the clips that connects to the base. Hope that helps.
- >
- > -Faruque
- > Email: faruque@sun.soe.clarkson.edu
-
- Remove the CPU?? So much for the warrantee . . .. Will the mounting
- hardware fit over zero-insertion-force and other "wierd" sockets, such as
- the new one on ZEOS machines that is oversized because it has extra pins
- for the P5 processor (or something they're anticipating as the next
- generation . . .) ??
- --
- Mark Underwood
- EE Student, University of Kentucky
- Lab Assistant, UK Library Microlabs
- Internet address: msunde01@mik.uky.edu
-
- "Cogito, ergo Sum." - Descartes
- "Non Cogito - poof!" - Anonymous
-