home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #26 / NN_1992_26.iso / spool / sci / electron / 18438 < prev    next >
Encoding:
Internet Message Format  |  1992-11-07  |  1.1 KB

  1. Path: sparky!uunet!olivea!spool.mu.edu!agate!doc.ic.ac.uk!uknet!cam-eng!cmh
  2. From: cmh@eng.cam.ac.uk (C.M. Hicks)
  3. Newsgroups: sci.electronics
  4. Subject: Re: Op amp configuration question
  5. Message-ID: <1992Nov6.121128.15045@eng.cam.ac.uk>
  6. Date: 6 Nov 92 12:11:28 GMT
  7. References: <1d9kjtINNna1@usenet.INS.CWRU.Edu>
  8. Sender: cmh@eng.cam.ac.uk (C.M. Hicks)
  9. Organization: cam.eng
  10. Lines: 18
  11. Nntp-Posting-Host: tw404.eng.cam.ac.uk
  12.  
  13. ah335@cleveland.Freenet.Edu (Richard Banks) writes:
  14.  
  15.  
  16. >I'm building a circuit where I need high gain.
  17.  
  18. >I was going to get two single op amps and send the output of one
  19. >to the input of the other one.
  20.  
  21. >But would it be possible for me to just get a dual op amp IC
  22. >and send the output of one to the input of the other on the same chip?!
  23.  
  24. Yes, a dual op-amp is identical with two single op-amps, just with shared
  25. power pins. A dual may in fact be better, since the two amplifiers will
  26. be at exactly the same temperature. It may be possible to use this fact
  27. to reduce thermal drifts etc. - difficult to say without more info on the
  28. specific application.
  29.  
  30. Christopher Hicks (cmh@uk.ac.cam.eng)
  31.