home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.aix
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!merrick
- From: merrick@magnus.acs.ohio-state.edu (Tom Merrick)
- Subject: Re: Use Of 10-BaseT With AIX...experiences?
- Message-ID: <1992Nov10.130042.17181@magnus.acs.ohio-state.edu>
- Sender: news@magnus.acs.ohio-state.edu
- Nntp-Posting-Host: bottom.magnus.acs.ohio-state.edu
- Organization: The Ohio State University
- References: <BxFFtr.wD@sti.com> <BxGEI7.MFF@math.uwaterloo.ca>
- Date: Tue, 10 Nov 1992 13:00:42 GMT
- Lines: 32
-
- In article <BxGEI7.MFF@math.uwaterloo.ca> mskucher@math.uwaterloo.ca (Murray S. Kucherawy [MFCF]) writes:
- >westes@sti.com (Will Estes) writes:
- >>I'm wondering if others out there are using 10-BaseT with AIX, and what
- >>have been your experiences with it, good and bad? In our situation, we
- >>want to get all of the PCs onto 10-BaseT connecting through the hub to a
- >>Netware/386 box. The question is should we put the AIX system onto the
- >>same net via 10-BaseT, or do we go by ethernet from AIX to the hub? Any
- >>reasons to favor ethernet over 10-BaseT with AIX?
- >
- >This is the setup we have. There have been no networking problems to speak
- >of, but we did find that NONE of the thickwire-to-10BaseT adapters fit
- >nicely because the thickwire jack on the back of our AIX machines is recessed
- >a bit and surrounded by a plastic frame. A real thickwire cable would fit
- >nicely, but the adapter needed to be really wedged in to connect properly,
- >and a slight nudge is enough to knock it out while live.
- >
- >I kinda wish IBM would have done what everyone else has been doing for a long
- >time and NOT recessed the thickwire jack. *sigh*
- >
- >-- Murray S. Kucherawy ----------------------------------------+--------------
- >Software Systems Co-op, Math Faculty Computing Facility [MFCF] | All spelling
- >University of Waterloo, Ontario, Canada | errors caused
- >E-mail: mskucherawy@{math,watdragon}.UWaterloo.ca | by Pnews.
- >---------------------------------------------------------------+--------------
-
- My networking people came up with a small 802.3<->10base-T tranceiver made by
- Computer Systems Products that DOES fit in the 320 back enclosure. Their
- phone number is 1-800-422-2537. The part number is MTCV-1 and its order
- number should be 420-025-000.
-
- Tom Merrick
- Ohio State University
-