NetNews Usenet Archive 1992 #26/NN_1992_26.iso/spool/comp/terminal/1344

Internet Message Format | 1992-11-09 | 1.4 KB

Path: sparky!uunet!dtix!darwin.sura.net!zaphod.mps.ohio-state.edu!saimiri.primate.wisc.edu!relay!towenpc.nswc.navy.mil!towen
From: [e-mail] (Thomas F. Owen)
Newsgroups: comp.terminals
Subject: VT100 Escape Sequences
Message-ID: <[e-mail]>
Date: 10 Nov 92 12:48:00 GMT
Sender: [e-mail]
Organization: Code E402, Naval Surface Warfare Center
Lines: 19

Please excuse me if this is a FAQ, but I am new to the list and need the
information ASAP.  I am trying to use Kermit version 2.32A to communicate
with an IBM mainframe at VPI&SU under CMS.  I am able to make the
connection and use the basic application keypad for the first 10 PF codes.
However, I believe that the remainder of the codes are Control-Keypad Keys
on a real VT100, but these are not programmed into the Kermit emulation.
I am very capable of defining the key sequences if I can get the information
on what escape sequences are sent for the various keystrokes, e.g., control-
keypad 4.  Could someone point me to either (1) a description of the full
set of VT100 escape sequences or (2) a mapping that someone has developed
for the VT100 emulation that works on an IBM mainframe under CMS.

Thanks in advance for any help that you can provide.

Tom Owen
===================================================================
Thomas F. Owen ([e-mail])
Work: [phone]
Paper Mail: NAVSWC, Code E402, Dahlgren VA 22448