home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.zenith
- Path: sparky!uunet!gumby!news.cs.andrews.edu!zds-oem!easton
- From: easton@zds-oem.zds.com (Jeff Easton)
- Subject: Re: Help with setup
- Organization: Zenith Data Systems, OEM Systems Engineering
- Date: Fri, 06 Nov 1992 00:37:27 GMT
- Message-ID: <1992Nov06.003727.27266@zds-oem.zds.com>
- References: <40526@sdcc12.ucsd.edu> <5NOV199213385077@robot.nuceng.ufl.edu>
- Lines: 31
-
- In article <5NOV199213385077@robot.nuceng.ufl.edu> glowboy@robot.nuceng.ufl.edu (LOUIS ISELIN) writes:
- >In article <40526@sdcc12.ucsd.edu>, ee152fbw@sdcc15.ucsd.edu (Itoyoko) writes...
- >>Say, I bought some memory for my father's zenith, but I can't get
- >>the machine to recognize it. The bios if mfm400 and on bootup
- ^^^^^^
- Remember this, it will be important later :-)
-
- >>it says that there is 7600k memory while setup reports 3300k, press
- >>esc. Thanks
-
- >It sounds like you need to run setup and report the new memory there.
- >Reboot in the monitor program by pushing Ctrl-Alt-Ins and then typing
- >"setup" at the prompt. Change the memory setup and save the new format
- >by following the directions on the screen. The error messages should go
- >away after that.
-
- mfm400 means he is running either a 486 EISA or ISA machine. These
- computers have had their ROM based setup moved to the ECU or ICU disk,
- respectivly.
-
- Find the original ECU or ICU disk and run it. Look in the users
- manual for info on how to run the ECU/ICU.
-
- >Louis
-
- --
- ___ ___ Jeff Easton easton@zds-oem.zds.com
- (__ (__ Zenith Data Systems j.easton@mi04.zds.com
- ___) ___) Saint Joseph, Mich. easton@andrews.edu
- Monte Carlo Z-LS/20 - Choice of a quiet generation
-
-