home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.next.hardware
- Path: sparky!uunet!mcsun!sunic!psinntp!psinntp!hd0258!gvh
- From: gvh@metrosoft.com (Gordon Van Huizen)
- Subject: Re: NeXT --> Studio3 MIDI Interface Cable
- Message-ID: <1992Nov7.194210.1370@metrosoft.com>
- Sender: gvh@metrosoft.com
- Reply-To: gvh@metrosoft.com (Gordon Van Huizen)
- Organization: Metrosoft
- References: <9269@blue.cis.pitt.edu.UUCP>
- Date: Sat, 7 Nov 1992 19:42:10 GMT
- Lines: 26
-
- In article <9269@blue.cis.pitt.edu.UUCP> cjp+@pitt.edu (Casimir J
- Palowitch) writes:
- >
- > Hi folks, I don't have the tools or skill to make this myself.
- > Neither does Altex Electronics. They tried, according to the man zs
- > page pinout scheme which I paste below... but failed.
- >
-
- Contact Worswick Industries in San Diego at 619.571.5400. They built our
- cable and I believe kept the proper schematic on file. We tried a few of
- the schematics floating around and found the one that works. If Worswick
- doesn't have it on file, have them call me and I'll locate which one was
- used.
-
- You might also want to try contacting Opcode. They requested the schematic
- from us and showed some interest in either stocking the cable or shipping
- it with new units.
-
- By the way, the cable also works with a MOTU MIDI Time Piece II.
-
- Gordon
- --
- ----------------------------------------------------------------
- Gordon Van Huizen vox: 619.488.9411 fax: 619.488.3045
- Metrosoft gvh@metrosoft.com [NeXTmail welcome]
- ----------------------------------------------------------------
-