home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!decwrl!hal.com!olivea!charnel!rat!usc!rpi!batcomputer!munnari.oz.au!bobjenner.ntu.edu.au!user
- From: bobjen@darwin.ntu.edu.au (Bob Jenner)
- Newsgroups: comp.sys.mac.hypercard
- Subject: Re: HyperCard on IBM systems
- Message-ID: <bobjen-061192141756@bobjenner.ntu.edu.au>
- Date: 6 Nov 92 05:18:49 GMT
- References: <92308.210622SCB107@psuvm.psu.edu>
- Followup-To: comp.sys.mac.hypercard
- Organization: NTU
- Lines: 29
- Nntp-Posting-Host: bobjenner.ntu.edu.au
-
- In article <92308.210622SCB107@psuvm.psu.edu>, <SCB107@psuvm.psu.edu>
- wrote:
- >
- > Alright all you netheads,
- >
- > I've been doing stack design in HyperCard on Mac for some time now. Some of
- > the stacks I've done would be good for distribution to people with IBM
- > systems. I've heard of the program called "ConvertIt" which converts HC to
- > ToolBook. Has anyone ever used this program and (2) is it worth it??? I've
- > never done any programming in ToolBook, would this be a better idea?? or
- > does the convertIt Program completely convert the HC stack to ToolBook.
- > ALSO.......... Is there a FTP site or other place where I may be able to
- > obtain this "ConvertIt" program?? I've seen it adv. in Heizer Software for
- > $200.00 a little steep I think. Any opinions... Please Email me responses
- > since I usually don't net around much!
- >
- > Shawn C. Begolly
- > College of Agricultural Scienecs
- > Pennsylvania State University
- > <scb107@psuvm.psu.edu>
-
- I am led to believe that "Spinnaker Plus 2.0" allows Hypercard stacks to
- run on a PC. I don't have a US address but can give you an Oz supplier,
- mind you, we usually pay twice the US price or therabouts.
-
- Cheers
- Bob Jenner
- Northern Territory University
- Darwin, Australia
-