home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!convex!darwin.sura.net!aplcen.apl.jhu.edu!saimiri.primate.wisc.edu!sdd.hp.com!elroy.jpl.nasa.gov!usc!news.service.uci.edu!network.ucsd.edu!ucsbcsl!ucsb.edu
- From: dandrese@ucsb.edu (Andresen)
- Newsgroups: comp.sys.mac.hardware
- Subject: SE w/Accelerator dislikes Sys 7
- Summary: SE doesn't boot w/System 7
- Message-ID: <6614@ucsbcsl.ucsb.edu>
- Date: 10 Nov 92 08:20:25 GMT
- Sender: news@ucsbcsl.ucsb.edu
- Distribution: ca
- Organization: University of California, Santa Barbara
- Lines: 15
-
- The college newspaper at my alma mater has a Mac SE (4/50) with
- a Radius Accelerator 16 and Two-Page Display installed. Tonight
- I was attempting to update their disk with System 7 with a singular
- lack of success. The installation went well, but booting only got
- as far as the "Welcome to Macintosh" message before the system froze.
-
- The effects are the same with and without extensions, and with the
- accelerator on and off. The Radius software might be the problem - the
- board is c. '89, and the software isn't much newer.
-
- Any suggestions?
-
- Thanks,
- Dan
-
-