home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!decwrl!purdue!yuma!ternlund
- From: ternlund@CS.ColoState.EDU (John Ternlund)
- Subject: Game-adapt
- Sender: news@yuma.ACNS.ColoState.EDU (News Account)
- Message-ID: <Nov13.193644.13069@yuma.ACNS.ColoState.EDU>
- Date: Fri, 13 Nov 1992 19:36:44 GMT
- Nntp-Posting-Host: mozart.cs.colostate.edu
- Organization: Colorado State University
- Lines: 14
-
-
- Does anyone know what the pin-outs are on the Joystick port for an IBM?
- What is button 1, button 2, x,y axis etc?
-
- My muti-I/O card did't specify what pins did what and I need to get an old
- NINE-PIN Apple Joystick (Mach 2) working with this 15pin port. So, I was going
- to build a little adapter. Has anyone done this, <or> does anyone know what
- the game port pinouts are?
-
- All opinions expressed or otherwise implied are my own.
- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
- John Ternlund Software Engineer, Integrated Decision Support,
- Colorado State University
- Internet: ternlund@mozart.cs.colostate.edu
-