home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!sgiblab!sdd.hp.com!hp-cv!hp-pcd!hpcvca!hpcvccl.cv.hp.com!scott
- From: scott@hpcvccl.cv.hp.com (Scott Linn)
- Subject: Re: ATI ULTRA PRO and DESKJET 500
- Message-ID: <1992Nov12.010319.5852@hpcvca.cv.hp.com>
- Sender: nobody@hpcvca.cv.hp.com
- Nntp-Posting-Host: hpcvccl.cv.hp.com
- Organization: Hewlett-Packard Company, Corvallis, Oregon USA
- References: <8645@lee.SEAS.UCLA.EDU>
- Date: Thu, 12 Nov 1992 01:03:19 GMT
- Lines: 20
-
- nazareth@malibu.janet.ucla.edu (Sean F. Nazareth) writes:
- :I have an ATI ULTRA PRO and a dot matrix printer. I noticed that the printing
- : on one line about 1" from start of printing was consistently messed up. That
- : is , half of the line (horizontally) would not print.
- :
- : I noticed that my printing problem only occurred when using the Flex Desk
- : Driver, and disappeared when using standard VGA or the Crystal Fonts driver.
-
- This is the exact same problems that occur with the DJ500. According to
- a GW person on the Gateway BBS, it was "a problem with the DeskJet driver".
- But, it appears that the dot matrix driver has a problem with the FlexDesk
- drivers too, so we can essentially eliminate the DJ500 driver as the
- problem.
-
- Would you be so kind as to write a note to technical support on the Gateway
- BBS, and let them know your problem? If they get enough complaints about
- the FlexDesk driver, perhaps they will get serious and fix them!
-
- Scott Linn
- scott@hpcvccl.cv.hp.com
-