home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!ferkel.ucsb.edu!taco!rock!stanford.edu!ames!saimiri.primate.wisc.edu!usenet.coe.montana.edu!news.u.washington.edu!ns1.nodak.edu!plains.NoDak.edu!wilken
- From: wilken@plains.NoDak.edu (Scott Wilken)
- Subject: Re: RFI: Seagate 3144A and AMI BIOS
- Sender: usenet@ns1.nodak.edu (News login)
- Message-ID: <BxIuA3.J55@ns1.nodak.edu>
- Date: Tue, 10 Nov 1992 22:25:15 GMT
- References: <1992Nov10.123547.1@skyler.mavd.honeywell.com>
- Nntp-Posting-Host: plains.nodak.edu
- Organization: North Dakota Higher Education Computing Network
- Lines: 20
-
- In article <1992Nov10.123547.1@skyler.mavd.honeywell.com> mellum@skyler.mavd.honeywell.com writes:
- >I apologize if this is the wrong place to post this, but I didn't know where
- >else it should go. The question is this: what parameters do I use for a Seagate
- >3144A 130MB drive for AMI BIOS setup? I know that it is user setup 47, but what
- >I need to know is info for WPcom, LDzone, heads, Sectors, etc. Any info would
-
-
- 1001 : sectors
- 15 : heads
- 17 : sectors/trach
-
- The rest doesnt matter, just put in 0 for the value (IE for landing zone,
- write precompensation, etc).
-
- Scott
-
- --
- Go FAST! | Internet: wilken@plains.nodak.edu | AMA #587126
- Take Chances! | UUCP: ..!uunet!plains!wilken | DoD #0087
- VF700F Interceptor | Bitnet: WILKEN@PLAINS |
-