home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ferkel.ucsb.edu!taco!gatech!rutgers!bagate!asi!disc.dla.mil!dsacg3.dsac.dla.mil!dcsc.dla.mil!cp01395
- From: cp01395@dcsc.dla.mil (Duane L. Rezac)
- Newsgroups: comp.sys.ibm.pc.hardware
- Subject: Need Tape Card Jumpers settings
- Message-ID: <1635@dcsc.dla.mil>
- Date: 9 Nov 92 19:10:58 GMT
- Organization: Defense Construction Supply Center, Columbus
- Lines: 46
-
-
- Hello.
-
- I have several tape drives/interface cards that I would like to try
- to use, but we have no documentation or software for them
-
- DRIVE: ARCHIVE model 5945c
-
- Interface Card: Mfg: Archive
- labeled assy 80147
- one of the chips has a label - 80234-003
-
- I can identify some of the jumpers:
-
- drq/dack jumpers are labeled
- irq jumpers are labeled
-
- there are 3 sets of jumpers I can not identify from
- the info on the board:
-
- a set of 7 jumpers labeled a3-a4
-
- a set of 4 jumpers label kk,hh,ff,nn
-
- a set of 3 jumpers labeled cc,y,dd
-
- the card is an 8 bit card, with a ribbon cabel connector on the top,
- and a 25-pin connector on the back plate. the board also has 5 leds
- labeled ds1-ds5 that are next to the jumpers labeled cc,y,dd
-
-
- The cards originally used a software called sytos - but as the drives
- were removed from pc's, the software was deleted, and our tech shop
- does not have an copies (we only had 4-5 of these tapes total).
-
- any help on what the above sets of jumpers do would be appreciated
-
-
- Duane L. Rezac
-
- drezac@dcsc.dla.mil
- --
- +-----------------------+---------------------------------------------------+
- | Duane L. Rezac |These views are my own, and NOT representitive of my place|
- | drezac@dcsc.dla.mil of Employment. |
- +-----------------------+---------------------------------------------------+
-