home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!munnari.oz.au!uniwa!cujo!chans
- From: chans@cs.curtin.edu.au (Sean Chan)
- Subject: Repost: 486SX-25 -> 486DX2-50 problems???
- Message-ID: <chans.721324007@marsh>
- Sender: news@cujo.curtin.edu.au (News Manager)
- Organization: Curtin University of Technology
- References: <chans.721243464@marsh>
- Date: Mon, 9 Nov 1992 15:46:47 GMT
- Lines: 34
-
- chans@cs.curtin.edu.au (Sean Chan) writes:
-
- >Gidday all,
-
- >Recently, I pulled out my 486SX-25 and plugged in a 486DX2-50. In
- >addition to that, I've added some new software on my system (eg. Turbo
- >Pascal 7.0). After a few days, I noticed that I had a lot of
- >"cross-linked" files problems. Also, while programming in Pascal,
- >occasionally, I get EMM386 telling me about some "exception" error...and
- >have no choice but to reboot.
-
- >What are the possibilities of 486DX2-50 chip causing problems like this??
- >My configuration is as follows :-
-
- >486DX2-50 CPU
- >UMC Chipset Board (capable of 486SX -> 486DX ...all speeds)
- >DR-DOS 6.0
- >8Mb RAM (combo of 1MbX9 and 1MbX3)
- >130 Mb HDD (80Mb DOS, 50Mb Linux)
-
- >Any help will be appreciated...
-
- >Sean
- ***********************************************************************
- * * *
- * Sean Chan * Inside every microchip *
- * Student Number : 892561F * there is a little man *
- * 3rd Yr. Computer Science * running around doing *
- * Curtin University of Technology * everything you have *
- * * asked him to do... *
- * E-Mail : chans@marsh.cs.curtin.edu.au * *
- * pchans@cc.curtin.edu.au ******************************
- * *
- ******************************************
-