home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!uwm.edu!ogicse!news.u.washington.edu!serval!luke.eecs.wsu.edu!tlin
- From: tlin@luke.eecs.wsu.edu (Tai-Shan Lin)
- Newsgroups: comp.sys.ibm.pc.hardware
- Subject: How to adjust focus of NEC 4D?
- Message-ID: <1992Nov9.092602.21368@serval.net.wsu.edu>
- Date: 9 Nov 92 09:26:02 GMT
- Article-I.D.: serval.1992Nov9.092602.21368
- Sender: news@serval.net.wsu.edu (USENET News System)
- Organization: Washington State University!
- Lines: 9
-
-
- I have a 2 years old NEC 4D which is out of focus a little bit. It is hard
- to read small fonts at 1024x768 mode. How to adjust the focus
- myself? If you have experience on this, please email so not to waste the
- net bandwidth. I will post a summary if I get enough replies.
-
- Thanks in advance.
-
- Tai-Shan
-