home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!stanford.edu!CSD-NewsHost.Stanford.EDU!Xenon.Stanford.EDU!dhess
- From: dhess@Xenon.Stanford.EDU (Drew William Hess)
- Subject: Re: ATI Ultra Pro and Crystal Fonts Problems
- Message-ID: <dhess.721262709@Xenon.Stanford.EDU>
- Sender: news@CSD-NewsHost.Stanford.EDU
- Organization: CS Department, Stanford University, California, USA
- References: <6bm10f_@rpi.edu>
- Date: 8 Nov 92 22:45:09 GMT
- Lines: 21
-
- chungy2@aix02.ecs.rpi.edu (Yau Felix Chung) writes:
-
- >Hello, all!
-
- >I was wondering if anyone has had problems getting the crystal fonts to
- >work using the ATI Ultra Pro. My problems is that when I run setup and
- >install the 1024x768 crystal fonts driver, I get a completely white
- >screen. Is there an update(fix) to the crystal font driver? I am using
- >a Micronics 486/33 local bus with this board. My monitor is an NEC
- >multisynch plus.
-
- I've been using the Crystal Fonts driver with my ATI Ultra Pro LB on
- a Gateway 4DX2-66V (Micronics VL-Bus) and have had no problems, except that
- when I open a DOS window for the first time I get garbage at the top of
- the screen. (However, this garbage disappears after I cause a redraw on
- that part of the screen -- say, by moving a window over top of it and then
- moving the window back to its original location.)
-
- -dwh-
- dhess@cs.stanford.edu
-
-