home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!munnari.oz.au!hp9000.csc.cuhk.hk!cucs5.cs.cuhk.hk!yen1366
- From: yen1366@cucs18.cs.cuhk.hk (Yen Chui Tin)
- Subject: Re: ET4000 non-interlaced info needed
- Message-ID: <1992Nov4.062520.4951@cucs5.cs.cuhk.hk>
- Sender: news@cucs5.cs.cuhk.hk
- Organization: Faculty of Engineering, The Chinese U. of Hong Kong
- References: <1992Nov3.155001.11885@waikato.ac.nz>
- Date: Wed, 4 Nov 1992 06:25:20 GMT
- Lines: 16
-
- hamish@waikato.ac.nz writes:
-
- >I have a generic ET4000 card (Magic SVGA), that I want to put into
- >non-interlaced 1024x768, and 800x600 hirefresh (40Mhz vs 36Mhz clock), but the
- >only information I have is that the non-interlaced modes are a sub-option of
- >mode 38h, and the 40Mhz is a sub-option of mode 30h.
-
- >Can somebody help me here? I have 2 programs that should work, but they don't
- >(vmode.exe does nothing, and the dmode.exe that comes with it won't let me put
- >the resolutiuons I want in an interactive mdoe under a DOS VDM, although dmode
- >works fine from normal DOS :( )
-
- Try using the mode 65 for 1024x768 non-interlace mode.
-
- Regards,
- CT Yen.
-