home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.hp
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!att-out!cbfsb!cbnewsf.cb.att.com!jpittas
- From: jpittas@cbnewsf.cb.att.com (john.pittas)
- Subject: 857 clock stops on shutdown?!?
- Message-ID: <1992Nov5.174011.16975@cbfsb.cb.att.com>
- Sender: news@cbfsb.cb.att.com
- Organization: AT&T
- Date: Thu, 5 Nov 1992 17:40:11 GMT
- Lines: 12
-
-
- We have noticed that the clock on our 857 does not appear to run
- when the OS (HP/UX 8.02) isn't up. After a reboot, the time seems
- lag by the amount of time the system was down. Is this considered
- normal behavior? Is it a hardware problem? If it's due to software,
- is there a patch to correct it? Or are we stuck with this?
- Help! Thanks in advance.
-
- John Pittas
- AT&T Bell Labs
- Middletown, NJ
- John.Pittas@att.com
-