home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!snorkelwacker.mit.edu!ai-lab!cs.tu-berlin.de!leto
- From: leto@opal.cs.tu-berlin.de (Manuel Fischer)
- Subject: Re: A2024
- Message-ID: <1992Nov5.200541.7556@cs.tu-berlin.de>
- Sender: news@cs.tu-berlin.de
- Organization: Techn. University of Berlin, Germany
- References: <OD.6badnetOA92-901-302p0_52d58f38@piraya.bad.se>
- Date: Thu, 5 Nov 1992 20:05:41 GMT
- Lines: 30
-
- Roger_Nordin@atb.bbs.bad.se (Roger Nordin) writes:
-
- >Does the A2024 monitor drivers for Release2 require ECS or not?
-
- No, you don't need ECS to run the A2024. Fact!
-
- >If so, would it work with an A1000?
-
- I don't now, some people say yes another no...
-
- >I know 512Kb of chip ram would be very limiting with this monitor, not a
- >single bitplane workbench of 128Kb should be acceptable. In any case, the
- >A2024 should work as a eight grayshades flickerfixed monitor for hires/lace
- >screens, right?
-
- It has only 4 grayshades. But with an 8 color WB under 2.04 I can display
- 8 different colors, but some colors have little black or grey horizontal lines,
- so there are only 4 ground-colors.
-
- The hires/lores/lace modi are Flickerfixed and there is a special
- 1008x1024 (PAL) and a 1008x800 (NTSC) Modi with two colors.
-
- > Roger Nordin _ // /!Net /est Bench
- > 2:203/602.0@fidonet \X/ Internet: Roger_Nordin@bad.se
-
- --
- Mail : Manuel Fischer, Cunostr. 17, D-1000 Berlin 33 /// Only
- Phone : +49-30-8247337 Germany /// Amiga makes
- e-mail: leto@cs.tu-berlin.de \\\/// it possible
- Z-Netz: M_Fischer@bamp.zer \XX/ -->A2000/28<--
-