home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.applications
- Path: sparky!uunet!munnari.oz.au!uniwa!cujo!amuser
- From: amuser@cs.curtin.edu.au (Bill Sharp-Smith)
- Subject: Re: SOLUTION: ProWrite Page length problems.
- Message-ID: <amuser.721284720@marsh>
- Sender: news@cujo.curtin.edu.au (News Manager)
- Organization: Curtin University of Technology
- References: <amuser.720935639@marsh> <johnv.03he@acix.DIALix.oz.au>
- Date: Mon, 9 Nov 1992 04:52:00 GMT
- Lines: 37
-
- johnv@acix.DIALix.oz.au (John Verhoeven) writes:
-
- >Bill Sharp-Smith (amuser@cs.curtin.edu.au) wrote:
- >> The secret lies in the "No gaps between pages" button in the page setup
- >> (?) requester. It must be turned ON, other wise your set page length is
- >> ignored. NLQ mode works fine, however.
-
- >What version of ProWrite are you using?
-
- >I tried this out last night with V3.2.4 and it still has the same problem.
-
- I've upgraded to 3.3.1, but I would have thought it would work with
- 3.2.4. Oh well, I guess not.
-
- >What other settings are you using..Preferences, Page Layout etc?
-
- In prefs mine is set to DIN A4 paper size, but that is probably
- over-ridden by ProWrite anyway. In ProWrite I'm using the A4 letter
- setting with aspect adjusted off.
- >> Thanks to Mark for his interest even though he doesn't work for New
- >> Horizons anymore.
-
- >What happened?
-
- I think he went back to Uni or something. He'll probably see this and
- tell us for real (Hi Mark) :-).
-
- --
-
- Gary McGhee
- ________________________________________________________________________
- /[ /~7 / / /~~ / / /~7 | Email: amuser@marsh.cs.curtin.edu.au ]
- [ / 7 /_/ /_7 //l/ / 7 | By post: PO Box 595, Cloverdale,W. Aust 6105 ]
- [ Amiga Users Group of | ]
- [ Western Australia Inc | Opinions expressed are my own etc... ]
- [_______________________________________________________________________]
- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
-