home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ukma!usenet.ins.cwru.edu!agate!doc.ic.ac.uk!uknet!strath-cs!gpalmer
- From: gpalmer@cs.strath.ac.uk (Gary J Palmer IE91)
- Newsgroups: comp.sys.acorn
- Subject: Re: Using custom screen modes with RO3.1
- Message-ID: <10959@baird.cs.strath.ac.uk>
- Date: 12 Nov 92 18:16:35 GMT
- References: <1992Nov11.171409.5944@mnemosyne.cs.du.edu> <1992Nov12.145659.26219@bradford.ac.uk>
- Sender: news@cs.strath.ac.uk
- Organization: Comp. Sci. Dept., Strathclyde Univ., Glasgow, Scotland.
- Lines: 30
- Nntp-Posting-Host: fleming-05
-
- In article <1992Nov12.145659.26219@bradford.ac.uk> D.S.Walker@bradford.ac.uk (Simeon Walker) writes:
- ->
- ->The program I had (can't remember the name) now no longer seems to work,
- ->but the modes I defined using it under RO2 still work fine under RO3.1
- ->
- ->The mode 12 equivalent I use is a little wider and deeper than the new
- ->Acorn wide mode, though my monitor is adjusted to the limit to fit it
- ->all on, perhaps you can adjust yours
- ->
-
- Does anyone know if the overscan modes supplied with Impression II work
- under RiscOS3.1, as I use them by default :-)
-
- It'll be a bit of a pain if they don't work, as I like being able to view
- most of an A4 page without scrolling.......
-
- Between IDE disc worries, and screen mode incompatibility, it's a wonder
- that RISCOS3.1 works so ofen!! (NOT A SERIOUS COMMENT, but it seems that
- there are more and more problems with RISCOS3.1 as time goes on, and
- ones that can not be easily cured (I don't call formatting the hard disc
- easy))
-
- Yours
-
- Gary
- --
- JANET : gpalmer@uk.ac.strath.cs
- Other Nets : gpalmer%cs.strath.ac.uk@ plus one of :-
- BITNET: UKACRL UUCP: ukc.uucp Internet: nsfnet-relay.ac.uk
- Programmers do it on Archimedes. #include <std.disclaimer>
-