home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!pipex!warwick!uknet!mcsun!sun4nl!dutrun!et.tudelft.nl!will_g
- From: will_g@et.tudelft.nl
- Newsgroups: comp.protocols.tcp-ip.ibmpc
- Subject: WinQVT and SLIP problem
- Message-ID: <1992Nov9.094731.345@et.tudelft.nl>
- Date: 9 Nov 92 07:47:31 GMT
- Organization: TU-Delft, dpt of Electrical Engineering
- Lines: 21
-
- I'm trying to get WinQVT/net 2.85 to work over a SLIP line, but I can't get it
- right. Sooner or later WinQVT crashes with a General Protection Fault, always
- at the same address. Until the crash it's working fine. Did anybody see this
- before? Soory if this is a FAQ, but I'm new to this group (in fact this is the
- first time I use News).
-
- My configuration is:
- 386SX 25MHz
- MSDOS 5.0
- Windows 3.1
- QEMM 6.02
- SLIP8250 .6
- PKTINT 2.0
- WINQVT 2.85
-
-
- Will van Geest (vgeest@et.tudelft.nl)
- Delft University of Technology
- Control Laboratoy
- Delft
- The Netherlands
-