home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!destroyer!cs.ubc.ca!unixg.ubc.ca!erich.triumf.ca!grant
- From: grant@erich.triumf.ca (Peter A. Grant)
- Newsgroups: comp.os.vms
- Subject: Re: VAX 4000/200 ethernet problems
- Date: 13 Nov 1992 09:50 PST
- Organization: TRIUMF: Tri-University Meson Facility
- Lines: 23
- Distribution: world
- Message-ID: <13NOV199209501245@erich.triumf.ca>
- References: <1dml3nINNo83@gap.caltech.edu>
- NNTP-Posting-Host: erich.triumf.ca
- News-Software: VAX/VMS VNEWS 1.41
-
- In article <1dml3nINNo83@gap.caltech.edu>, cld@yankee.caltech.edu (Cheryl L. Southard) writes...
- >...
- >After I took the ethernet cable off the DEQNA (AUI cable) and attached
- >it to the EZA0 port, I would get lots of decnet errors on the console
- >like "Circuit up", "Circuit Down", "Adjacency up" There were numbers
- >...
-
-
- We ran into this type of problem on a VAXstation II/GPX. It turned out to
- be the bulk head where Ethernet cable plugs into, and the wiring into the
- chassis. This was the second machine that this happened on.
-
-
- Peter Grant //////// /////// //////// // // // // ////////
- grant@reg.triumf.ca // // // // // // /// /// //
- // /////// // // // //////// ///////
- // // // // // // // // // //
- // // // //////// ////// // // //
- Canada's National Meson Facility
- __________________________________________ _ Vancouver, British Columbia
-
- Chairperson, Vancouver Oracle Users Group
-
-