home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.programmer
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!decwrl!netsys!agate!ames!elroy.jpl.nasa.gov!usc!wupost!gumby!destroyer!fmsrl7!lynx!nmsu.edu!opus!ghenniga
- From: ghenniga@NMSU.Edu
- Subject: C Set/2 2.00 Bug? (was Re: Loading Bitmaps using GpiLoadBitMap?)
- In-Reply-To: harris@garfield.catt.ncsu.edu's message of Mon, 2 Nov 1992 13:48:43 GMT
- Message-ID: <GHENNIGA.92Nov6124359@ampere.ampere>
- Sender: usenet@nmsu.edu
- Reply-To: ghenniga@NMSU.Edu
- Organization: New Mexico State University - Electromagnetics Group
- References: <GHENNIGA.92Nov1150830@ampere.ampere> <harris.720712123@garfield.catt.ncsu.edu>
- Date: Fri, 6 Nov 1992 19:43:59 GMT
- Lines: 19
-
-
- In an artical harris@catt.ncsu.edu (Michael Harris) writes:
- >Try putting the actual width and height into the last two parameters. You
- >shouldn't have to do that but maybe there is a bug. Also, be absolutely
- >sure that you are loading the proper resource number.
-
- Either I don't understand what's happening (quite possible)
- or I've found a bug in the C Set/2 compiler that came on the DAP CD
- (version 2.0?). It seems that the problem with GpiLoadBitMap I was having
- only occurs when using the "optlink linkage". If you invoke the compiler
- with the /Ms flag (which disables optlink) GpiLoadBitMap works fine
- otherwise it always returns 0. Maybe someone can verify this and if it is
- a bug then I'll see about reporting it to IBM.
-
- Gary Hennigan
- ---------
- PhD Student, Computational Electromagnetics
- New Mexico State University
- email: ghenniga@NMSU.Edu
-