home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.misc
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!moe.ksu.ksu.edu!usenet-feed.cc.umr.edu!mcs213f.cs.umr.edu!bhoppe
- From: bhoppe@mcs213f.cs.umr.edu (Brad Hoppe)
- Subject: Re: How to fix PRODUCT.EXE problem n 12th disk!!!
- References: <1992Nov6.214153.1607@jhunix.hcf.jhu.edu> <1992Nov9.203159.14130@miavx1.acs.muohio.edu>
- Date: Tue, 10 Nov 1992 07:08:31 GMT
- Nntp-Posting-Host: mcs213f.cs.umr.edu
- Organization: University of Missouri - Rolla
- Sender: cnews@umr.edu (UMR Usenet News Post)
- Message-ID: <1992Nov10.070831.27794@umr.edu>
- Lines: 28
-
- In article <1992Nov9.203159.14130@miavx1.acs.muohio.edu> mgjones@apsvax.aps.muohio.edu (Mike Jones) writes:
- >Tim DiLauro (timmo@jhunix.hcf.jhu.edu) wrote:
- >: In article <1992Nov6.183742.22769@kum.kaist.ac.kr> jhlee@rose.handy.co.kr (Lee Joo Hee) writes:
- >: >asks for 12th disk I put it into my disk driver. Install program reads
- >: >well but it generates an error related with "A:FIX\OS2\PRODUCT.EXE" and
- >: >it displays only log message. When I reboot my computer, OS/2 doesn't seem
- >: >to work correctly.
- >: > Is there any solution?
- >:
- >: above. The solution was to reinstall the GA without the secondary display,
- >: install any other non-video drivers, and then install the ServicePak.
- >
- >Save yourself from reinstalling! Just edit your CONFIG.SYS on your hard
- >drive, look near the bottom where you can see the video drivers, and remove
- >the references to your second adapter (usually pretty easy to see, for
- >example, I had a Monochrome/Printer Adapter as a second display, so the
- >drivers ended in MPA (before the extension, like xxxxMPA.SYS or whatever).
- >There was 2 references to my secondary display in my config.sys.
- >
- >Then run the CSD install, and it should finish with no problem. If that
- >fails, THEN reinstall GA and try it.
- >
- >---
- Just My thoughts on the matter.
- I was installing the CSD, and got an error on disk twelve the first two times.
- Both times, it reffered to PRODUCT.EXE, well, I just got the disk
- image again, and created disk 12 over again, The Everything worked right.
-
-