home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.apps
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!decwrl!sdd.hp.com!usc!sol.ctr.columbia.edu!emory!europa.asd.contel.com!darwin.sura.net!news.duc.auburn.edu!ducvax.auburn.edu!hank
- From: hank@ducvax.auburn.edu
- Subject: Re: how to run dvips32?
- Message-ID: <1992Nov5.212140.1@ducvax.auburn.edu>
- Lines: 26
- Sender: usenet@news.duc.auburn.edu (News Account)
- Nntp-Posting-Host: ducvax
- Organization: Auburn University, AL
- References: <1992Nov4.141152.17328@kakwa.ucs.ualberta.ca>
- Date: Fri, 6 Nov 1992 03:21:40 GMT
- Lines: 26
-
- In article <1992Nov4.141152.17328@kakwa.ucs.ualberta.ca>, kdorma@ravana.eche.ualberta.ca (Kevin Dorma) writes:
- > Given: OS/2 2.0, emTeX (tex386) in working condition
- > INITeX was performed
- > MFJOB ALL also done (not using mf386 'cause it says something about
- > "warning, requires emx 0.8 or greater")
-
- 1. Put emx.dll in \emx\dll\.
- 2. Add the directory to your LIBPATH statement in config.sys
- 3. re-boot.
-
-
- > How in the world do I install/run dvips32???
- > I don't find the documentation to be a lot of help.
-
- Sinha's port of dvips is immediately ready for emtex. Unzip it. Make sure
- that the entries in \emtex\ps\config.ps point to the right places. NOTE:
- a '*' is a COMMENT-line in this file. If config.ps is not in c:\emtex\ps\,
- then set TEXCONFIG to point to the directory containing config.ps.
- The documentation in dvips.tex is quite clear about this.
-
- Note that there is a companion file in pub/os2/all/emtex/ for OS/2 1.x and
- MSDOS. These are versions 5.490; Rokicki has warned that versions before
- 5.495 have problems with more than 21 fonts (per page?).
-
- --
- --Darrel Hankerson hank@ducvax.auburn.edu
-