home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.linux
- Path: sparky!uunet!sun-barr!cs.utexas.edu!zaphod.mps.ohio-state.edu!darwin.sura.net!ra!tantalus.nrl.navy.mil!eric
- From: eric@tantalus.nrl.navy.mil (Eric Youngdale)
- Subject: Re: Warning: using old stat() call. Recompile binary.
- Message-ID: <BxIEAB.192@ra.nrl.navy.mil>
- Sender: usenet@ra.nrl.navy.mil
- Organization: Naval Research Laboratory
- References: <martin.721363005@menaik> <1992Nov10.155049.26567@cbnewsj.cb.att.com>
- Date: Tue, 10 Nov 1992 16:39:46 GMT
- Lines: 15
-
- In article <1992Nov10.155049.26567@cbnewsj.cb.att.com> nhc@cbnewsj.cb.att.com (n.h.chandler) writes:
- >In article <martin.721363005@menaik>, martin@cs.UAlberta.CA (Tim Martin; FSO; Soil Sciences) writes:
- >> My attempts to compile the latest Linux have not been very
- >> successful. With patch level 4 I get the following error
- >> several times, for each disk access command I enter:
- >> Warning: using old stat() call. Recompile binary.
- >
- >I have the same problem with pl4. As soon as the system boots
- >the screen is filled with warning messages "old_stat_call(). Recompile binary"
-
- I had the same problem. It was the setterm binary, and I just pulled
- the copy from H.J.'s bootable rootdisk and that solved everything.
-
- --
- Eric Youngdale
-