home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!pipex!warwick!uknet!mcsun!sunic!ericom!stills.ericsson.se!etmelag
- From: etmelag@stills.ericsson.se (Louis Lagendijk)
- Newsgroups: comp.os.linux
- Subject: Re: Problems with ST01 and SQ5510
- Message-ID: <1992Nov5.160831.12057@ericsson.se>
- Date: 5 Nov 92 16:08:31 GMT
- References: <1992Nov4.104626.10208@athena.mit.edu>
- Sender: news@ericsson.se
- Organization: Ericsson Telecom, Stockholm, Sweden
- Lines: 29
- Nntp-Posting-Host: stills.ericsson.se
-
- In article <1992Nov4.104626.10208@athena.mit.edu> nmp08@rz.uni-kiel.dbp.de writes:
- >Hi all,
- >I have problems installing Linux 0.98pl1 (hlu's 3rootdisk).
- >My configuration is:
- >486-33 ISA,
- >AT-Bus Controller with Seagate 1239A,
- >SCSI-Controller ST01 with SyQuest SQ5510 Removable Cartridge Drive.
- >
- >I got the following:
- >LILO loading vmlinux.
- >Then I get: error 0x04..
- >and Lilo tries again to load vmlinux (without success).
- >When I take out the ST01 then it works.
- >
- >Please send me a jumper description for the ST01 Card or anything else so
-
- Well it is not much that I got to offer you but:
- I have a 386/40 with a 210 rodime IDE and a Seagate ST01 with a ST296.
- Under dos
- and Linux the HD works fine (exept for the well known, rather limited speed)
- When I use HLU's root disk, I also get the error 04 after which Lilo tries to
- reboot.
-
- I have not worried about it too much, as I have everything going. I have not had the
- time to investigate the problem in more detail, so I do not know whether LILO is to blame.
- I expect Lilo to have some problems in this case, as copying a working kernel and rerunning
- Lilo did not seem to correct the problem.
-
- Louis
-