home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.lang.c
- Path: sparky!uunet!gatech!darwin.sura.net!max.fiu.edu!serss0!sumargoh
- From: sumargoh@serss0.fiu.edu (H. Sumargo)
- Subject: How to simulate an ISDN BRI channel through RS-232?
- Reply-To: sumargoh@fiu.edu
- Organization: FIU Electrical & Computer Engineering
- Date: Thu, 5 Nov 1992 15:22:23 GMT
- Message-ID: <Bx91DB.FuE@fiu.edu>
- Sender: sumargoh@serss0 (H. Sumargo)
- Lines: 11
-
- I would like to be able to connect two computer remotely through the RS-232 and be able
- to send information as packet switch at a speed 192 KBPS. I wonder if someone on the
- net has eve done this.
-
- If the above mentioned subject does not sound familiar, instead, I would like to ask
- if it is possible to communicate through RS-232 at 192 KBPS? Could someone please
- email me some pointers or may be the c source code to setup the RS-232 link for
- 192KBPS or higher?
-
- I would appreciate if you please email me your response to sumargoh@fiu.edu. Thank
- you very much.
-