home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #26 / NN_1992_26.iso / spool / comp / arch / storage / 757 < prev    next >
Encoding:
Internet Message Format  |  1992-11-10  |  1.4 KB

  1. Path: sparky!uunet!ogicse!psgrain!ee.und.ac.za!csir.co.za!stel.csir.co.za!mabbot
  2. From: mabbot@stel.csir.co.za (Mike Abbot)
  3. Newsgroups: comp.arch.storage
  4. Subject: Need to use DAT as data drive.
  5. Keywords: DAT
  6. Message-ID: <mabbot.11.721464405@stel.csir.co.za>
  7. Date: 11 Nov 92 06:46:45 GMT
  8. Article-I.D.: stel.mabbot.11.721464405
  9. Organization: CSIR
  10. Lines: 29
  11. NNTP-Posting-Host: 146.64.23.16
  12.  
  13. A bit of help required !
  14.  
  15. I would like to use a (WANG)DAT as a data storage device (as opposed to a 
  16. backup device) in a PC based system.
  17.  
  18. Ideally I would like to be able to read and write to the DAT drive in a 
  19. manner analogous to a hard drive (albeit in a sequential fashion).  The only 
  20. software I have seen so far is stuff to perform an archiving/backup function.
  21.  
  22. I have the device driver for the SCSI controller in the PC (Adaptec), and I 
  23. know that I can probably do what I need to do with the relevant SCSI 
  24. calls ...  BUT I'm trying to avoid that !
  25.  
  26. 1.  Has someone done this type of thing before ?
  27.  
  28. 2.  Is there any sort of standard for the (high-level) formatting of data on 
  29. a DAT drive ?
  30.  
  31. 3.  Is there a device driver available that allows a DAT to function as a 
  32. DOS disk drive ?
  33.  
  34. Any help or comments will be greatly appreciated.
  35.  
  36. Mike
  37.  
  38.  
  39. Mike Abbott     mabbot@fred.csir.co.za (EMAIL not very reliable at present)
  40. Cape Town       PH :  +27 2231 75101
  41. RSA             FAX : +27 2231 75142
  42.