home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: vmsnet.networks.tcp-ip.ucx
- Path: sparky!uunet!ukma!darwin.sura.net!zaphod.mps.ohio-state.edu!uwm.edu!psuvax1!atlantis.psu.edu!news
- From: ASM@snowyt.me.psu.edu (Aravind Melligeri)
- Subject: Help: problem in configuring UCX 1.3
- Message-ID: <h?71Hip+4a@atlantis.psu.edu>
- Sender: news@atlantis.psu.edu (Usenet)
- Organization: Pennsylvania State Univ., Dept. of Mechanical Engineering
- Date: Wed, 14 Oct 92 17:04:17 GMT
- X-News-Reader: VMS NEWS 1.24
- Lines: 30
-
- Hello,
- I am running UCX 1.3 for last few months. When we went on backbone I configured
- the UCX to run. It was running without any problem for last few months. couple
- days back I started getting error telling that not enough dynamic memory to
- open socket. I talked to some people they pointed out that i had enabled the
- dynamic routing [ this was the last question in ucx configuration with default
- answer being YES]. I went back and re-configured the all the machines. Now it
- loads fine but, it can't access the name servers or any other machines outside
- our domain [128.118.183]. I thought this is some problem with the net mask and
- broadcast mask. MY IP address is 128.118.183.100 before i had used Net mask
- as 255.255.255.0 and broadcast mask as 128.118.183.255 [ this is when i had
- enabled the dynamic routing]. Now i have disabled the dynamic routing and with
- these netmask and broadcast mask i can't access the nameservers. Just to try,
- changed the netmask and net mask to 255.255.0.0 and broadcast mask to
- 128.118.255.255 for this setting now i am able to access the nameservers and
- any other host in 128.118 domain but not outside 128.118 domain.
- Everyone else here is using the netmask and broadcast masks what i we had
- before [ in that line].
- can anyone help me with this problem.
- please reply to asm@eclx.psu.edu i can't receive mails here b'cos of the above
- said problem.
- thanx
- --aravind
-
- --Aravind S. Melligeri
- -------------------------------------------------------------------------------
- System Administrator | asm@mevax.psu.edu
- Dept. of Mechanical Engg. | off: 814-865-2062
- Pennsylvania State Univ. | res: 814-867-5922
- -------------------------------------------------------------------------------
-