home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #23 / NN_1992_23.iso / spool / vmsnet / misc / 921 < prev    next >
Encoding:
Internet Message Format  |  1992-10-12  |  1.6 KB

  1. Xref: sparky vmsnet.misc:921 comp.sys.dec:5418 comp.os.vms:16431
  2. Path: sparky!uunet!destroyer!gatech!rutgers!spcvxb!terry
  3. From: terry@spcvxb.spc.edu (Terry Kennedy, Operations Mgr.)
  4. Newsgroups: vmsnet.misc,comp.sys.dec,comp.os.vms
  5. Subject: Re: RQDXE switches for 3 RD drives
  6. Message-ID: <1992Oct12.170114.4096@spcvxb.spc.edu>
  7. Date: 12 Oct 92 21:01:14 GMT
  8. References: <1992Oct12.102348.214@cpvax.cpses.tu.com>
  9. Organization: St. Peter's College, US
  10. Lines: 20
  11.  
  12. In article <1992Oct12.102348.214@cpvax.cpses.tu.com>, robert@cpvax.cpses.tu.com writes:
  13. > The default switch settings are used for RQDXE#1.  There doesn't seem
  14. > to be any switches on any of the drives. (including RD54-D)  What I 
  15. > need is DIP switches for the second RQDXE.
  16.  
  17.   I've never seen two RQDXE's used in a chain. Doesn't mean it can't be done,
  18. though. Think of the RQDXE as a switch that steers individual drive selection
  19. to one or the other external connector. There are also some options for setting
  20. whether or not the connected devices are floppies or hard disks (had disks need
  21. ready/write protect support a little differently).
  22.  
  23.   So, you'd set the first RQDXE to send one drive select (likely DS3) to the
  24. CPU BA23's drive, and the other 3 (1, 2, and 4) to the second RQDXE. The second
  25. RQDXE will send DS4 to the BA23-C expander and route DS1 and DS2 off to the
  26. expansion box, but translated to DS3 and DS4 (you need this because the expan-
  27. der [RD5x-D] box only responds to DS3 and DS4).
  28.  
  29.     Terry Kennedy        Operations Manager, Academic Computing
  30.     terry@spcvxa.bitnet    St. Peter's College, Jersey City, NJ USA
  31.     terry@spcvxa.spc.edu    +1 201 915 9381
  32.