home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: rec.models.rc
- Path: sparky!uunet!think.com!yale.edu!jvnc.net!erenj.com!mlachow.erenj.com!mlachow
- From: mlachow@erenj.com (Michael Lachowski)
- Subject: Re: FUTABA Micro Servos
- Message-ID: <mlachow.42@erenj.com>
- Sender: news@erenj.com (USENET News System)
- Nntp-Posting-Host: mlachow.erenj.com
- Organization: CTSD
- References: <1992Oct08.182024.42552@watson.ibm.com> <92283.081619N42@psuvm.psu.edu>
- Date: Tue, 13 Oct 1992 12:30:40 GMT
- Lines: 9
-
- In article <92283.081619N42@psuvm.psu.edu> <N42@psuvm.psu.edu> writes:
-
- >The only difference between the S33 and the S133 is the plug. The servos are
- >identical otherwise. These arn't bad low cost servos, however, buy stock in
- >the servo gears.
- >Scott Gregory
-
- I believe the S33 uses the older Futaba 1.32ms pulse width. The newer
- equipment is the more common 1.5ms pulse width.
-