home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!stanford.edu!rutgers!network.ucsd.edu!mvb.saic.com!tgv.com!info-multinet
- From: MRL@NERUS.PFC.MIT.EDU (MARK LONDON)
- Newsgroups: vmsnet.networks.tcp-ip.multinet
- Subject: Setting up terminal server to access STREAM printer queue?
- Message-ID: <2C2007E114SEP92161321@TGV.COM>
- Date: 14 Sep 92 16:13:21 GMT
- Organization: The INFO-MULTINET Community
- Lines: 17
- X-Gateway-Source-Info: INTERNET
- X-Return-path: <info-multinet-relay@TGV.COM>
- X-RFC822-From: MARK LONDON <MRL@NERUS.PFC.MIT.EDU>
- X-Envelope-to: info-multinet@TGV.COM
- X-VMS-To: IN%"info-multinet@TGV.COM"
- Nntp-Posting-Host: Mvb.Saic.Com
-
- I have postscript printers on terminal server ports presently connected via lat
- printer queues on vms. I want to experiment with using tcp instead. I set up
- stream protocol printer queues under multinet and tried sending postscript
- files. The files were sent, but nothing appeared. Has anyone succeeded in
- doing this? I am trying it on a decserver 300, and the documentation is
- limited for that. I assume I have to set parameters on the ds300 correctly.
-
- BTW, I tried using the telnet command to connect to the port, and it hung and I
- could not break out of it of so I had to kill the process.
-
- I also have a datability vcp-1000 terminal server which I could try also, if
- it's easier to do it with that.
-
- Thanks.
-
- Mark
-
-