home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: rec.models.rc
- Path: sparky!uunet!ftpbox!mothost!lmpsbbs!bobwo
- From: bobwo@ecs.comm.mot.com (Bob Woodhouse)
- Subject: Re: Airtronics / Futaba
- Organization: secure_comm
- Date: Tue, 8 Sep 1992 21:56:17 GMT
- Message-ID: <1992Sep8.215617.28113@lmpsbbs.comm.mot.com>
- References: <9209081551.AA08763@bottom.magnus.acs.ohio-state.edu>
- Sender: news@lmpsbbs.comm.mot.com (Net News)
- Nntp-Posting-Host: 145.1.147.44
- Lines: 40
-
- In article <9209081551.AA08763@bottom.magnus.acs.ohio-state.edu> Matthew D Marks <mmarks@magnus.acs.ohio-state.edu> writes:
- >Hello Net...
- >
- >
- >Quesion #2:
- >He also has a spare Futaba s148 servo that he would like to use with his
- >Airtronics radio. All he needs to do is solder on a servo connector, but the
- >Airtronics servo connector has the following scheme:
- >
- >Airtronics: Futaba:
- > ---------black black-------------
- >to connector ---------black red--------------- to servo
- > ---------black w/ red white-------------
- >
- >How do these connect?
- >
- >Thanks
- >Matt
- >--
- >======================================================================
- >Matthew D. Marks || " In the race for quality,
- >Mechanical Engineering Department || there is no finish line. "
- >The Ohio State University ||
- >e-mail: marks.23@osu.edu || - David T. Kearns
- >======================================================================
-
-
- This question has come up recently. I have e-mailed the answer to someone before,
- but a follow-up posting contradicted my answer. Perhaps someone will disagree with
- my answer, but I have recently and succesfully followed verbal instructions from
- Airtronics and written instructions on a spare Futaba connector I bought, so there.
-
- Airtronics red or black/red = Futaba red
- Airtronics outer black = Futaba white
- Airtronics middle wire (black) = Futaba black
-
- The wires will cross in a twisted way, so don't worry about that.
-
- Have a good day,
- Bob Woodhouse
-