home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.bsd
- Path: sparky!uunet!elroy.jpl.nasa.gov!usc!sdd.hp.com!caen!hellgate.utah.edu!fcom.cc.utah.edu!cs.weber.edu!terry
- From: terry@cs.weber.edu (A Wizard of Earth C)
- Subject: Re: Minimum system requirements for 386bsd ?
- Message-ID: <1992Sep15.193402.4399@fcom.cc.utah.edu>
- Sender: news@fcom.cc.utah.edu
- Organization: Weber State University (Ogden, UT)
- References: <2551.2ab5de20@vger.nsu.edu> <2552.2ab5def0@vger.nsu.edu>
- Date: Tue, 15 Sep 92 19:34:02 GMT
- Lines: 32
-
- In article <2552.2ab5def0@vger.nsu.edu> r_moore@vger.nsu.edu writes:
- >In article <2551.2ab5de20@vger.nsu.edu>, r_moore@vger.nsu.edu writes:
- >> I need to know what the minimum requirements are to run 386bsd are. More
- >> specifically will it run on this configuration:
- >> 386sx @16mhz
- >> 1 meg RAM
- >> 40 meg HD
- >> if it will not run on this system what additions will I need to make ?
- >> Thanks, Richard
- >>
- > While I'm at it is there a bsd FAQ for information such as my above question ?
- >if so is there a site where I can FTP it from ?
- > Thanks again, Richard
- >
-
- It *will* run on that configuration; however, you will need a high density
- floppy drive to load it before it can run, and you will need to rawrite
- the files from a DOS machine with a high density drive to get them onto
- disks.
-
-
- Terry Lambert
- terry_lambert@gateway.novell.com
- terry@icarus.weber.edu
- ---
- Any opinions in this posting are my own and not those of my present
- or previous employers.
- --
- -------------------------------------------------------------------------------
- "I have an 8 user poetic license" - me
- Get the 386bsd FAQ from agate.berkeley.edu:/pub/386BSD/386bsd-0.1/unofficial
- -------------------------------------------------------------------------------
-