home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.bsd
- Path: sparky!uunet!spool.mu.edu!umn.edu!umeecs!nova!ellis
- From: ellis@nova.gmi.edu (Stew Ellis)
- Subject: Re: anyone have qic-02 drive working?
- Message-ID: <ellis.716507043@nova>
- Sender: news@zip.eecs.umich.edu (Mr. News)
- Organization: GMI Engineering&Management Institute, Flint, MI
- References: <92258.122038MHS108@psuvm.psu.edu>
- Date: Mon, 14 Sep 1992 21:44:03 GMT
- Lines: 29
-
- MHS108@psuvm.psu.edu (Mark Solsman) writes:
-
- >Hello again, I am asking again to see if anyone has any information:
-
- >I have a Wangtek 5150EQ qic-150 tape drive, and an Archive VP402 qic-02
- >interface board on my machine.
-
- >The tape works fine in msdos, but bsd/386 doesn't recognize it upon
- >bootup.
-
- >Can anyone offer any suggestions? I am not sure why it doesn't work...
- >they claim that it should.
-
- >Thanks in advance!
- >-mark
- >-----
- >Mark Solsman
-
- >The Pennsylvania State University - University Park, Pennsylvania
- > "My opinions are not that of my own"
-
- Check to make sure it is jumpered to the right values for IRQ, DMA and
- address. Frequently these are different for UNIXes and for DOS.
-
- --
- -- ___________________
- R.Stewart(Stew) Ellis, Assoc.Prof., (Off)313-762-9765 / _____ ______
- Humanities & Social Science, GMI Eng.& Mgmt. Inst. / / / / / /
- Flint, MI 48504 ellis@nova.gmi.edu /________/ / / / /
-