home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.aux
- Path: sparky!uunet!spsgate!mogate!newsgate!gpb-mac.!gpb
- From: gpb@gpb-mac. (greg berryman )
- Subject: Re: Bad 3.0 install problem! BAD! BAD!
- Message-ID: <1992Sep14.140817.28804@newsgate.sps.mot.com>
- Sender: usenet@newsgate.sps.mot.com
- Nntp-Posting-Host: 222.1.248.85
- Organization: SPS
- X-Newsreader: Tin 1.1 PL4
- References: <1992Sep13.033604.13946@col.hp.com>
- Date: Mon, 14 Sep 1992 14:08:17 GMT
- Lines: 40
-
- chrism@col.hp.com (Chris Magnuson) writes:
- : I've been working with Apple to try and get an installation problem with 3.0
- : resolved. So far, they have got the software to install, but there are runtime
- : erro messages that come up. ANd when I try to do the installation on another
- : drive of the same size/model I get an error message (bunch of them actually):
- :
- : Disk write c0d0s0 Error: SCSI Timeout
- : Logical Block 48, physical blocks 648351-648414
- : scsitask: unrecognized message 0x1
- :
- : This happens during the partition change of a UNIX slice or when the UNIX
- : installer says that it is Initializing UNIX filesystems...
- :
- : Sometimes I get a message about a successful retry.
- :
- : The people at Apple have been nice, but I'm no closer to getting the problem
- : resolved than I was 8 weeks ago.
- :
- : Yes the bus is terminated properly. I've tried everything imaginable and
- : spent many hours on this. What should I try now? I have read the FAQ list
- : concerning installation woes.
- :
- : Help! HEEEEEEEEEELLLLLLLPPPPPP!
- :
- : chrism@col.hp.com
- : Chris Magnuson
- : Software Development Engineer
- : Hewlett-Packard
- : (719) 590-2963
-
- I'll be glad to try, but what hardware are you using?
- For that matter, what software are you using to format/initialize the disk?
-
- I'm sure that you will get more than just my answer once the net knows what
- the details are.
-
-
- --
- Greg Berryman gpb@gpb-mac.sps.mot.com
- Motorola Inc. Austin Texas
-