home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.amiga
- Path: sparky!uunet!cs.utexas.edu!asuvax!ennews!fishpond!fnf
- From: fnf@fishpond.uucp (Fred Fish)
- Subject: Re: Amiga SCSI tape (Caliper CP-150SAEH)
- Message-ID: <1992Sep4.172228.11292@fishpond.uucp>
- Date: Fri, 4 Sep 1992 17:22:28 GMT
- References: <1992Sep04.000029.26458@mhs.oz.au>
- Organization: Amiga Library Services
- Lines: 24
-
- In article <1992Sep04.000029.26458@mhs.oz.au> jimbo@mhs.oz.au (James Davidson) writes:
- >I am looking for info on the jumper settings of the
- >Caliper CP-150SAEH tape drive. This is the tape drive
- >that was shipped with our Amiga 3000 UX. The jumpers
- >are located inside the casing with must be removed to
- >get at them.
-
- Switch Factory Use
- ------ ------- ---------------------------
- 1 Off SCSI ID (LSB)
- 2 Off SCSI ID
- 3 On SCSI ID (MSB)
- 4 Off SCSI parity selection
- 5 Off Drive type (LSB)
- 6 Off Drive type
- 7 On Drive type
- 8 On Drive type (MSB)
- 9 Off Factory use
- 10 Off Factory use
-
- -Fred
- --
- |\/ o\ Fred Fish, 1835 E. Belmont Drive, Tempe, AZ 85284, USA
- |/\__/ 1-602-491-0048 {asuvax,mcdphx,cygint,amix}!fishpond!fnf
-