home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!sun-barr!olivea!spool.mu.edu!uwm.edu!daffy!uwvax!astroatc!vidiot!ftms!brown
- From: brown@ftms.UUCP (Vidiot)
- Newsgroups: comp.sys.sun.hardware
- Subject: Re: HELP! New 3/60 owner needs help with configuration
- Message-ID: <325@ftms.UUCP>
- Date: 14 Sep 92 16:42:05 GMT
- References: <1992Sep3.221120.9474@wam.umd.edu>
- Reply-To: brown@ftms.UUCP (Vidiot)
- Distribution: usa
- Organization: Vidiot's Other Hangout
- Lines: 24
-
- In article <1992Sep3.221120.9474@wam.umd.edu> mikec@wam.umd.edu (Michael D. Callaghan) writes:
- <
- <I just bought a Sun 3/60 color system with two shoeboxes: One is a
- <141MB HD, the other a 141MB HD w/60MB Tape. I have the cables and
- <the SCSI terminator.
- <
- <The problem is this: the system only works when I hook up *just*
- <the hard drive. And it only boots manually. When I hook up the
- <other shoebox and try to boot, it just sits there.
- <
- <I already know that the HD/Tape box does not have a system on it.
- <I would like to find out how to get both drives running, get the
- <second hard drive formatted and mounted, and get the tape drive
- <working.
- <
- <Then I'll worry about getting the rest of the system up and running!
-
- You gotta change the SCSI address of the hard drive on the box with the
- tape drive. You have two SCSI addresses the same, so it will fail.
- --
- harvard\
- ucbvax!uwvax!astroatc!ftms!brown or uu2.psi.com!ftms!brown
- rutgers/
- INTERNET: brown@wi.extrel.com or ftms!brown%astroatc.UUCP@cs.wisc.edu
-