home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.sun.hardware
- Path: sparky!uunet!xrxedds!xrxedds!chaz
- From: chaz@elvis.xrxedds.COM ( Charles Brault)
- Subject: HELP needed connecting WorldBlazer to Sparc 2
- Message-ID: <CHAZ.92Sep10165412@elvis.xrxedds.UUCP>
- Sender: news@xrxedds.com (News Administration)
- Nntp-Posting-Host: elvis
- Organization: EDDS, Xerox Corporation, Herndon Va.
- Distribution: comp.dcom.modems,comp.sys.sun.hardware
- Date: Thu, 10 Sep 1992 21:54:12 GMT
- Lines: 35
-
- I am trying to replace the Trailblazer Plus with a new WorldBlazer.
- The line is primarily used to remote logins.
-
- I have tried to follow an old set to setup notes (which worked for the
- TrailBlazer) obtained from uunet titled:
-
- "
- ===============================================================
- Telebit Corporation Revision 1.03 08November 1990
- ===============================================================
-
- SETUP INSTRUCTIONS FOR TELEBIT MODEMS AND THE SUN SPARCSTATION I
- (SUNOS 4.1)"
-
- These notes worked fine for the TB, they don't appear to work for the
- WB.
-
- When I try to run a getty,the modem seems to be reflecting back the
- login prompt. I obviously don't have all the registers set right.
-
- If someone could give me a register dump of a TrailBlazer attached to
- a Sparc 2 and setup as a dial in port, I would be much obliged...
-
- I'm running 4.1.2 SunOS, WB has LA5.00W rom.
-
- --
- These dain bramaged opinions are my own. Usual
- disclaimers, etc., etc., etc....
-
- Charles E. Brault uunet!brault!chaz
- Computer Consulting
- 10 Thomas Street
- Rockville, MD 20850
- 301-279-7164
-
-