home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.sgi
- Path: sparky!uunet!haven.umd.edu!darwin.sura.net!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!usc!elroy.jpl.nasa.gov!ames!eos!aio!nuntius
- From: Jim Barrett <barrett@ial3.jsc.nasa.gov>
- Subject: VME-P2 EXPANSION connector on a 4D/35GT
- Message-ID: <1992Sep15.140351.22824@aio.jsc.nasa.gov>
- Sender: news@aio.jsc.nasa.gov (USENET News System)
- Organization: Lockheed Engineering & Sciences Co.
- X-Useragent: Nuntius v1.1
- Date: Tue, 15 Sep 1992 14:03:51 GMT
- Lines: 19
-
- Greetings, netters ...
-
- I'm trying to install a VME board in a 4D/35 here, and am trying to
- access the board's user pins on the VME P2 connector. There's a
- connector on the back of the 4D/35 labeled "VME-P2 EXPANSION" with
- many pins (64? I haven't counted yet).
-
- I've R'ed all the FM's that came with the system, and can't find a
- *mention* of the connector, let alone a description. Can anyone tell
- me what the specs are on this connector, or what document contains a
- description of it?
-
- AtDhVaAnNkCsE
-
- --
- Jim Barrett barrett@ial3.jsc.nasa.gov
- "This has been a test of the Opinion Broadcast System. If this had
- been an actual opinion you would have received instructions on where to
- go and what to do. This is only a test."
-