home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!spool.mu.edu!yale.edu!ira.uka.de!chx400!sicsun!disuns2!/!balaguer
- From: balaguer@disuns2.epfl.ch (Jean-Francis Balaguer)
- Newsgroups: comp.sys.sgi
- Subject: Problems with textured line on VGX
- Message-ID: <1992Sep15.094043@disuns2.epfl.ch>
- Date: 15 Sep 92 07:40:43 GMT
- Sender: news@disuns2.epfl.ch
- Reply-To: balaguer@disuns2.epfl.ch (Jean-Francis Balaguer)
- Organization: Ecole Polytechnique Federale de Lausanne
- Lines: 26
- Nntp-Posting-Host: disuns2.epfl.ch
-
-
- I have problems drawing textured line on the VGX.
- I am using two kinds of primitive
-
- bgnclosedline, endclosedline
- bgnqstrip, endqstrip (width polymode(PYM_LINE)
-
- The behaviour is very strange, the hardware drawing the line correctly but
- at wrong position in space. This behavious is present on my
-
- 440VGX (3.3.2) and Crimson VGX (4.0.4)
-
- However if I run the program on our Indigo Elan (4.0.4) everything is
- fine on that machine.
-
- Going through GLdebug gives no warning and analysing the GLhistory file
- do not present any mistakes.
-
- Is that a known problem.
-
- Thanks for help.
- --
- -------------------------------------------------------------------------------
- Francis Balaguer, DI/LIG Ecole Polytechnique Fed. de Lausanne CH-1015 Lausanne
- E-mail : Work balaguer@di.epfl.ch, Fax: +4121 6935328
- -------------------------------------------------------------------------------
-