home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!decwrl!infopiz!lupine!motcsd!king.csd.mot.com!brian
- Newsgroups: comp.sys.palmtops
- Subject: Re: Palmtop to run Mathcad
- Message-ID: <7088@motcsd.csd.mot.com>
- From: brian@king.csd.mot.com
- Date: 12 Sep 92 15:21:55 GMT
- Sender: usenet@motcsd.csd.mot.com
- References: <1992Sep9.022731.28998@sbcs.sunysb.edu> <1992Sep11.011807.18550@uwm.edu> <1992Sep11.135853.2266@ttsi.lonestar.org>
- Lines: 13
-
- Don't forget that MathCAD 2.5 doesn't require Windows, and so it can run
- on very low end systems. If you don't require MathCAD 3.X, you might want
- to consider it -- at least while you wait for palmtop technology to advance.
- I've run MathCAD 2.5 on an old NEC UltraLite (V30 CPU, no math coprocessor,
- 640KB memory, mono CGA display) and it works fine.
- --
- -Brian Smithson
- Motorola Inc., Computer Group
- 2001 Logic Drive, M/S 1-E10, San Jose, CA 95124 USA, (408)369-4104
- brian@ca41.csd.mot.com, {apple | pyramid}!motcsd!brian
- post-Motorola: brian@starnet.starconn.com, apple!starnet!brian
-
- "Motorola changed the game, and all I got was this lousy tee-shirt!"
-