home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.palmtops
- Path: sparky!uunet!decwrl!access.usask.ca!kakwa.ucs.ualberta.ca!unixg.ubc.ca!george
- From: george@unixg.ubc.ca (George Chow)
- Subject: Re: Has anyone made their own HP95LX <-> PC serial cable?
- Message-ID: <1992Sep10.211530.8731@unixg.ubc.ca>
- Sender: news@unixg.ubc.ca (Usenet News Maintenance)
- Nntp-Posting-Host: kynok.ucs.ubc.ca
- Organization: University of British Columbia, Vancouver, B.C., Canada
- References: <rthien.716102001@c3po.rdt.monash.edu.au>
- Date: Thu, 10 Sep 1992 21:15:30 GMT
- Lines: 31
-
- In article <rthien.716102001@c3po.rdt.monash.edu.au> rthien@c3po.rdt.monash.edu.au (rj thien) writes:
- >Hi there,
- >
- >I was wondering if anyone has attempted to make their own
- >HP95LX <-> PC cable. If you have I was wondering if you
- >can tell me which lines go where. Is it similar to the
- >HP48SX calculator connections?
-
- Yup, it's the same serial port.
-
- >If it is I have some
- >documentation on that matter. I know a 4-pin plug with
- >2mm pin seperation is difficult to acquire but I think
- >I found one from a bunked PC hard-drive that might just
- >do the job.
-
- Then you're all set for the job.
-
- >Cheers,
- >
- > Roger....
- >
- >
- >--
- >| Roger J. Thien, Department of Robotics and Digital Technology
- >| Monash University (Caulfield Campus), P.O. Box 197, Caulfield East,
- >| VIC 3145, AUSTRALIA. Email: rthien@monu6.cc.monash.edu.au,
- >| rthien@rossum.rdt.monash.edu.au, rthien@daneel.rdt.monash.edu.au
-
- George
-
-